Anker Roav SmartCharge F3 User Manual
- June 2, 2024
- Roav
Table of Contents
- Safety Instructions
- What’s Include
- At a Glance
- LED Display Guide
- Getting Started
- FM Transmitter
- Playing Music
- Hands Free Calling
- Charging Your Devices
- Specifications
- Notice
- Trademark
- Customer Service
- Questions about your Manual? Post in the comments!
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
USER MANUAL
Roav SmartCharge F3 (Model R5132)
Safety Instructions
Important Safety Instructions
SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for the car charger of Roav SmartCharge F3 (Model R5132).
Please read and understand all instructions before using this product. If damage is caused by failure to follow the instructions, the warranty does not apply.
- Read all instructions and cautionary markings before using this product.
- Do not expose to rain, moisture, or snow.
- Use of an attachment is not recommended or sold by the manufacturer may result in a risk of fire, electric shock, orinjury to persons.
- Do not operate this car charger if it has received a sharp blow,been dropped, or otherwise damaged in any way; take it to a qualified service person.
- Do not disassemble this car charger; take it to a qualified service person when service or repair is required. Incorrectreassembly may result in a risk of electric shock or fire.
- To reduce risk of electric shock, unplug this car charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
- To reduce risk of fire or electric shock, do not interconnect output terminations
This device can not be re-charging by notebook computer 01 and it can’t be charging by AC,The device can only be used in a car.
- Avoid long exposure to direct sunlight, which may cause damage to the device.
- Exposing this product to open flames may cause it to explode. . Do not use this product in strong magnetic fields.
- Use a dry, soft lint-free cloth to clean. Do not use any corrosive cleaner or oil to clean,
- CAUTION – For continued protection against risk of fire, replace only with the same type and ratings of fuse, fuse rating is 63V DC/7A.
- Always obey traffic laws and pay attention to the road. Do not attempt to use this device while driving, as some features are limited while the vehicle is in motion. Failure to pay full attention to the operation of your vehicle could result in death, serious injury or property damage. You assume total responsibility and risk for using this device.
Note: Please contact our customer service center if Roav SmartCharge F3 cannot fit into your car’s cigarette lighter socket. You can return your Roav SmartCharge F3 for a full refund.
What’s Include
At a Glance
LED Display Guide
The UI is subject to charge without notice.
Getting Started
- Plug Roav SmartCharge F3 into your vehicle’s cigarette lighter socket.
- Start your vehicle’s engine.
- The LED display will light up, and show the ROAV logo and current voltage of the car battery.
- Download the Roav Charger app from the App Store (smartphones running iOS 10.2 or higher) or Google Play (smartphones running Android 5.0 or higher).
- Enable Bluetooth on your smartphone and search for available Bluetooth devices.
- Select “Roav F3_XXXX”and connect.
- Once successfully connected, Bluetooth will stop flashing,
FM Transmitter
The Roav SmartCharge F3 allows you to connect your phone to your car’s stereo via FM signal. There are two ways to set up:
- Use the F3
- Press and hold CH for one second when using the F3 for the first time.
- F3 begins to search an unoccupied FM frequency.
- Turn on the FM radio in your car and tune it to the FM frequency set on the F3.
- To customize your FM frequency:
- Press CH on F3.
- FM frequency displays on the LED screen.
- Press to select a FM frequency. Make sure the transmitting frequency matches the frequency your radio is tuned.
2. Use the Roav Charger App Follow the on-screen instructions in the Roav Charger app to complete connection via FM Radio.
- Tap the “FM radio”.
- Tap “SmartScan” (Figure a).
- The Roav Charger App begins to search an unoccupied frequency
- Press and hold one preset station to customize stations
- Adjust the slider or tap to choose a radio frequency (Figure b).
- Tap “Set”. Once chosen, the previous presets are replaced by the new ones.
- Turn on the FM radio in your car and tune to a frequency that matches the frequency set on the Roav Charger App.
- Play audio from your phone.
- You will hear the audio from the car stereo,
Note: You can also connect the car charger to your car’s stereo by using a 3.5mm AUX cable.
Playing Music
When the car charger F3 is successfully connected to your smartphone, you can press the multi-functional button to play music from your phone. Music can then be streamed to your car’s sound system via FM transmitter or the AUX socket. You can also insert a USB flash drive or a microSD card to enjoy music that is stored on these devices.
To further reduce echo and background noise on your calls and music, you can connect a 3.5 mm AUX cable (not provided) to the AUX socket of the car charger and the AUX-In socket of your car’s audio system.
Hands Free Calling
When the car charger is successfully connected to your smartphone, you can enjoy convenient hands-free calling,
Charging Your Devices
Roav SmartCharge F3 has two USB charging ports (one 5V/1A output port and one Quick Charge 3.0 port). You can charge two devices at the same time with a maximum output of 22W.
Specifications
Specifications are subject to change without notice.
- DC input: 12V-24V
- Quick Charge 3.0 output: 3.6V-6.5V = 3A, 6.5V-9V – 2A, 9V-12V – 1.5A
- Bluetooth: V4.2
- Bluetooth transmission distance: 10 m/32.8 ft
- USB audio format: .mp3.wma flac .wav
- FM frequency range: 87.5-108 MHz
- FM transmission range: 2 m / 78.7 in
- USB file system: FAT, FAT32, exFAT
- Operating temperature range: -20°C to 40°C/-4°F to 104°F
- Storage temperature range: -40°C to 85°C/-40°F to 185°F
Notice
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.
The following importer is the responsible party.
- Company Name: Fantasia Trading LLC
- Address: 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US
- Telephone: +1 (909) 484 1530
Trademark
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google LLC.
Customer Service
12-month limited warranty.
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Lifetime technical support.
support@goroav.com
1(800) 988 7973 (US) Mon-Fri 9:00-17:00 (PT)
@GoRoav
@GoRoav
Anker Innovations Limited. All rights reserved. ROAV and the ROAV logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
Anker-Roav-SmartCharge-F3-Manual-Optimized.pdf
Anker-Roav-SmartCharge-F3-Manual-Original.pdf
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>