CleanView® Connect Robotic Vacuum Light Status & Errors | Support
- June 7, 2024
- Bissell
Table of Contents
Status Notifications:
| Status | Button Light Status | Light Ring | Sound |
|---|---|---|---|
| Power On | Pulse Once > Blink > On | Pulse Once | Activation Sound |
| Cleaning | Blink > Fade In > On | Pulse Once > Fade In > 30 seconds > Fade Out |
Activation Sound
Charging| Breathing| Pulse Once > Breathing for 30 seconds > Off|
1 Beep (when 1st docked) *Green light on top of Dock will go out
Pairing Mode| Blink > Fade In > On | Off| 1 Beep
Paired| On| Solid for 5 Seconds > Fade Out| 3 Beeps
Low Battery| Blinking White| Off| 2 Beeps
Error Notifications:
*START/PAUSE button must be pressed to clear error then again to resume
cleaning
| Button Light Status | Sound | Error | Possible Cause | Remedies |
|---|---|---|---|---|
| Flashing Red | 1 Beep | Robot Lifted/Clean Sensors | Robot cannot | |
| maneuver/Sensors are dirty |
Turn OFF > Pick up robot and set back on floor to resume cleaning > If error persists > Clean Cliff sensors on bottom of robot
Flashing Red > Solid Red| 1 Beep| Wheel Stuck| Wheel is Obstructed| Turn OFF >
Clear debris from the wheels
Flashing Red > Solid Red| 2 Beeps| Edge Brush Stuck| Edge brushes are
restricted|
Turn OFF > Clear debris from edge brushes > See detailed instructions HERE
Flashing Red | 3 Beeps| Front Wheel Error| Debris accumulated under Front Caster Wheel|
Turn OFF > Remove Caster Wheel by pulling straight up > Both the Caster Wheel and Wheel Frame should be removed > Clear debris from wheel and underside of wheel frame
Flashing Red > Solid Red| 3 Beeps| Brush Roll Stuck| Obstruction in the brush
area| Turn OFF > Clear debris from brush roll and brush chamber > See
detailed instructions
HERE
Flashing White| 2 Beeps| Bumper Stuck/Robot Trapped| Bumper cannot move
freely| Turn OFF > Remove debris from Bumper > Compress Bumper several times
to ensure it moves freely
If remedy does not resolve the issue, please Contact Us
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>