Hanwha Techwin SBP-300WMW1 Wall Mount Adaptor User Guide
- June 9, 2024
- Hanwha Techwin
Table of Contents
Wall Mount Adaptor
SBP-300WM1
SBP-300WMW1
Package
WALL MOUNT ADAPTOR
Product Overview
This product is used to install the Smart Dome Camera and Anti Vandal Camera on a wall or vertical structure.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
Installation
-
Pull out the external power cable, BNC cable and communications cable (for connecting to the “camera”) through the rear of the Wall Mount Adaptor into the Pipe.
` Then, it is recommended to keep the cables in a distance of about 100 mm from the pipe. -
Secure the Wall Mount Adaptor to the wall using the “Anchor Bolts or Nuts (M10)”.
` When installing the product on a wall, mark and drill 4 holes into the Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before installation. -
Mount the Camera set on the Pipe.
` Install the camera according to the camera’s installation guide.
※ Caution for water prevention
Documents / Resources
|
Hanwha Techwin SBP-300WMW1 Wall Mount
Adaptor
[pdf] User Guide
SBP-300WM1, SBP-300WMW1, SBP-300WMW1 Wall Mount Adaptor, Wall Mount Adaptor,
Adaptor
---|---