DOMETIC Waeco 40 Portable Fridge Instruction Manual
- July 22, 2024
- Dometic
Table of Contents
DOMETIC Waeco 40 Portable Fridge
Product Specifications
- Product Name: Waeco 40 Portable Fridge
- Intended Use: Cooling food in various settings including vehicles, camping, household, and similar applications
- Power Supply: DC onboard power supply of a vehicle or boat, DC auxiliary battery, AC power supply
Product Usage Instructions
- The product comes with the necessary components for operation.
- The cooling device is suitable for cooling food in various environments and is designed for use in vehicles, camping, and household settings.
- Minimize temperature fluctuation by opening the device only when necessary.
- Ensure proper air circulation around stored food.
- Adjust temperature based on the type and quantity of food.
- Store food covered to prevent odor absorption or release.
- Place the device in a well-ventilated area away from direct sunlight.
- Cool down warm food before placing it in the device.
- Avoid frequent opening of the device.
- If using a basket, position it correctly for optimal energy consumption.
- Regularly check the lid seal for proper fit.
- Connect the cooling device to a suitable power source as per the provided guidelines.
FAQ
- Q: Can the cooling device be used for freezing food?
- A: The cooling device is designed for cooling food and may not be suitable for freezing due to temperature limitations.
- Q: How should I clean the cooling device?
- A: Defrost, clean, and dry the device regularly. Ensure it is disconnected from the power supply before cleaning.
- Q: Can the cooling device be operated on both AC and DC power sources simultaneously?
- A: No, the cooling device should be connected to either an AC or DC power source at a time as per the manufacturer’s instructions.
Copyright
© 2024 Dometic Group. The visual appearance of the contents of this manual is
protected by copyright and design law. The underlying technical design and the
products contained herein may be protected by design, patent or pending
patent. The trademarks mentioned in this manual belong to Dometic Sweden AB.
All rights are reserved.
Important notes
Please read these instructions carefully and follow all instructions,
guidelines, and warnings included in this product manual to ensure that you
install, use, and maintain the product properly at all times. These
instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions,
guidelines, and warnings carefully and that you understand and agree to abide
by the terms and conditions as set forth herein. You agree to use this product
only for the intended purpose and application and under the instructions,
guidelines, and warnings as outlined in this product manual as well as under
all applicable laws and regulations. A failure to read and follow the
instructions and warnings set forth herein may result in an injury to yourself
and others, damage to your product or damage to other property in the
vicinity. This product manual, including the instructions, guidelines, and
warnings, and related documentation, may be subject to changes and updates.
For up-to-date product information, please visit
documents.dometic.com.
Related documents
- Find the full operating manual online on qr.dometic.com/bfD320.
Safety instructions
DANGER! Electrocution hazard
- On boats: If the device is powered by the mains, ensure that the power supply has a residual current device (RCD), a residual current circuit breaker (RCCB), or a ground fault circuit interrupter (GFCI). Installation, especially in potentially damp areas, must be under all applicable installation regulations.
- Do not touch exposed cables with your bare hands. This applies especially when operating the device from the AC mains.
- Before starting the device, ensure that the power supply line and the plug are dry.
WARNING! Explosion hazard
Do not store any explosive substances such as spray cans with a flammable
propellant in the cooling device.
WARNING! Elecotrocution hazard
- Do not operate the cooling device if it is visibly damaged.
- If the cooling device’s power cable is damaged, it must be replaced with a suitable power cable or assembly available from the manufacturer or its service agent to prevent safety hazards.
- This cooling device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.
- Plug the device to sockets that ensure proper connection especially when the device needs to be earthed.
WARNING! Fire hazard
- When positioning the cooling device, ensure that the supply cord is not trapped or damaged.
- Do not locate multiple portable socket outlets or portable power supplies at the rear of the device.
- Keep the ventilation openings on the device housing or in installations free of obstructions.
- Do not use any mechanical objects or other means to speed up the defrosting process, unless they have been recommended by the manufacturer for this purpose.
- Do not open or damage the refrigerant circuit.
- Do not use electrical devices inside the cooling device unless they are recommended by the manufacturer for that purpose.
WARNING! Health hazard
- This cooling device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowl-edge unless they have been given supervision or instruction concerning use of the cooling device by a person responsible for their safety.
- Children must be supervised to ensure that they do not play with the device.
- Cleaning and user maintenance must not be carried out by unsupervised children.
CAUTION! Electrocution hazard
- Before starting the cooling device, ensure that the power supply line and the plug are dry.
- Disconnect the cooling device from the power supply
- Before each cleaning and maintenance After every use
CAUTION! Health hazard
- To avoid contamination of food, observe the following instructions:
- Check if the cooling capacity of the cooling device is suitable for storing the food to be cooled.
- Food may only be stored in its original packaging or in suitable containers.
- Opening the cooling device for long periods can cause a significant increase of the temperature in the compartments of the device.
- Clean regular surfaces that can come in contact with food and accessible drainage systems.
- If the cooling device is left empty for long periods:
- Switch off the cooling device.
- Defrost the cooling device.
- Clean and dry the cooling device.
- Leave the lid open to prevent mold from developing within the cooling device.
NOTICE! Damage hazard
- Check that the voltage specification on the data plate corresponds to that of the energy supply.
- Only connect the cooling device as follows:
- With the DC connection cable to a DC power supply in the vehicle
- With the AC connection cable to an AC power supply
- Never pull the plug out of the socket by the cable.
- If the cooling device is connected to a DC outlet, disconnect the cooling device and other power-consuming devices from the battery before connecting a quick-charging device.
- If the cooling device is connected to a DC outlet, disconnect the cooling device or switch it off when turning off the engine. Otherwise, the battery may be discharged.
- The cooling device is not suitable for transporting caustic materials or materials containing solvents.
- The insulation of the cooling device contains flammable cyclopentane and requires special disposal procedures. Deliver the cooling device at the end of its life cycle to an appropriate recycling center.
- Do not place the cooling device near open flames or other heat sources (heaters, direct sunlight, gas ovens, etc.).
- Risk of overheating! Ensure at all times that there is a minimum of 50 mm ventilation on all sides of the cooling device. Keep the ventilation area free of any objects that could obstruct the airflow to the cooling components. Do not use or store the cooling device in closed compartments or areas with no or minimal airflow.
- Do not fill the inner container with ice or fluids.
- Never immerse the cooling device in water.
- Protect the cooling device and cables against heat and moisture.
- The cooling device shall not to be exposed to rain.
Scope of delivery
Intended use
The cooling device is suitable for cooling food. The cooling device is also
suitable for use on vehicles.
The cooling device is designed to be operated from a DC on-board power supply
of a vehicle or boat, from a DC auxiliary battery or from an AC power supply.
The cooling device is suitable for camping use.
The cooling device is intended to be used in household and similar
applications such as:
- Staff kitchen areas in shops, offices, and other working environments
- Farmhouses
- Clients in hotels, motels, and other residential-type environments
- Bed and breakfast-type environments
- Catering and similar non-retail applications
This product is only suitable for the intended purpose and application under
these in-structions.
This manual provides information that is necessary for the proper installation
and/or operation of the product. Poor installation and/or improper operation
or maintenance will result in unsatisfactory performance and possible failure.
The manufacturer accepts no liability for any injury or damage to the product
resulting from:
- Incorrect installation, assembly or connection, including excess voltage
- Incorrect maintenance or use of spare parts other than the original spare parts provided by the manufacturer
- Alterations to the product without express permission from the manufacturer
- Use for purposes other than those described in this manual
Dometic reserves the right to change product appearance and product specifications.
Operation
Avoiding food waste
To avoid food waste, note the following
- Keep temperature fluctuation as low as possible. Only open the cooling device as often and- for as long as necessary. Store the foodstuff in such a way that the air can still circulate well.
- Adjust the temperature to the quantity and type of the foodstuff.
- Foodstuff can easily absorb or release odor or taste. Always store foodstuff covered or in closed containers/bottles.
Saving energy
- Choose a well-ventilated location that is protected from direct sunlight.
- Allow warm food to cool down first before placing it in the cooling device to keep cool.
- Do not open the cooling device more often than necessary.
- Do not leave the cooling device open for longer than necessary.
- If the cooling device has a basket: For optimal energy consumption, position the basket according to its position on delivery.
- On a regular basis, ensure that the lid seal still fits properly.
Operating
- Connect the cooling device to a battery.
- Connect the cooling device to an AC power supply.
- Switch the cooling device on.
- Switch the cooling device off and store the cooling device.
- Set the desired temperature.
- Select the desired temperature units.
- Use the battery monitor.
- Set the display’s brightness of the cooling device.
Disposal
- Recycling packaging material: Place the packaging material in the appropriate recycling waste bins wherever possible.
- Recycling products with non-replaceable batteries, rechargeable batteries, or light sources:
- If the product contains any non-replaceable batteries, rechargeable batteries, or light sources, you don’t have to remove them before disposal.
- If you wish to finally dispose of the product, ask your local recycling center or specialist dealer for details about how to do this under the applicable disposal regulations.
CONTACT
SUPPORT
SALES
- waeco.com/en/de/contact
- waeco.com
- 445104545 4450036207 54-1017-MAW40B 2024-07-10
A complete list of Dometic companies, which comprise the Dometic Group, canbe found in the public filings of: DOMETIC GROUP AB Hemvämsgatan 15 SE-17154 Solna Sweden