MOZA RACING R5 Direct Drive Wheel Base User Manual
- July 20, 2024
- MOZA RACING
Table of Contents
MOZA RACING R5 Direct Drive Wheel Base
Product Information
Specifications:
- Product: R5 Racing Simulator
- Wheel Base: Direct Drive
- Resolution: 15-bit
- Interface: USB
Product Features:
- Intelligent Temperature Control System
- 15-bit Resolution for precision
- MOZA Pit House Control Center Software for customization
- MOZA App Cloud Control for remote access
Installation Guide:
- Fix the base to the bracket using the provided screw holes.
- Connect the USB and power cables to the corresponding ports on the rear of the base.
- Power on the R5 by short-pressing the power button at the rear.
- Download and install the MOZA Pit House Software Suite from www.mozaracing.com.
- Visit the official website for installation videos and additional information.
Desk Clamp Installation Guide:
Align the screw holes on the base with the desk clamp, secure with screws,
and tighten the knobs. Recheck knob tightness to prevent loosening during use.
Precautions:
- Avoid exposure to rain or water to prevent fire or electric shock.
- Do not place in direct sunlight for extended periods to avoid damage.
- Monitor gaming time and take breaks for safety.
- Not suitable for children under 6 years old; small parts may pose a choking hazard.
- Children under 13 should use it under adult supervision.
- Do not disassemble without permission to avoid warranty void.
- Connect only to safe electronic power supplies.
Software Introduction:
The MOZA Pit House Control Center Software allows for customization and fine-
tuning of the R5 Racing Simulator to enhance your racing experience.
FAQ:
-
Q: Can I use non-standard power supplies with the R5?
A: No, non-standard power supplies are prohibited for use with the R5. Only use AC power from a standard wall outlet to avoid damage. -
Q: What should I do if I find an issue with my R5?
A: If you notice any abnormalities, stop using the device immediately and contact MOZA directly or an authorized dealer for assistance.
Product Features
- 5.5 N·m Peak Torque
- Servo Direct Drive System
- Aviation-grade Aluminum Alloy
- Ultra-low Torque Ripple and Cogging
- Intelligent Temperature Control System
- 15-bit Resolution
- MOZA Pit House Control Center Software
- MOZA App Cloud Control
Wheelbase Interface
Basic Parameters
Installation Guide
- Fix the base to the bracket through the 2-4 screw holes on the bottom of the base.
- Insert the Type-B end of the USB cable and power cable into the corresponding ports on the rear of the R5 base.
- Short press the power button (located on the rear of the R5 base) to power on the R5.
- Navigate to MOZA Racing (www.mozaracing.com) and download the latest version of the MOZA Pit House Software Suite. Install it and start your racing journey!
- For installation videos and further information, visit our official website (www.mozarac-ing.com)
Desk Clamp Installation Guide
Align the four screw holes on the bottom of the base with the mounting holes
on the desk clamp and fix it to the desk clamp with 4 screws. Tighten the knobs
on the desk clamp to the desktop and be sure to tighten up the knobs again to
avoid the desk clamp from loosening and falling off during intense driving.
Precautions
- Never expose the unit to rain or water to avoid fire / electric shock.
- Do not expose the unit to direct sunlight for extended periods as this may damage the unit.
- For your safety and well-being, please monitor your gaming time and take breaks as needed.
- The R5 is not suitable for children under the age of 6, and smaller parts may present a choking hazard.
- Children under the age of 13 should be accompanied by a guardian when using the R5.
- It is forbidden to disassemble the device without the permission of MOZA, otherwise the user voluntarily voids their warranty.
- The R5 must be connected to a safe electronic power supply.
- If repair or replacement is required, only conduct this with MOZA directly or with relevant authorized repair centers.
- Non-standard power supplies are prohibited from use.
- Use only AC power provided by a standard wall outlet to avoid damage to the R5.
- Do not expose the device to heat sources as this will damage the R5.
- If the R5 will not be used for an extended period, unplug the device.
- If you find an abnormality with the R5, please stop using the device immediately and contact MOZA directly or a relevant authorized dealer/center.
- Please follow the MOZA official website or relevant social media for the latest information on the R5 or related products.
This product is designed as a simulator! Please remember to distinguish simulations from reality and drive safely!
Software Introduction
MOZA Pit House is MOZA’s one-stop software solution for the MOZA ecosystem. Here, users can check the status of all their connected MOZA devices. This also allows for vast configurations, including setting the base angle of the wheel, force feedback, pedal adjustments, HUD settings, game settings, and more. It also allows for quick starting of relevant games if they have been detected on the computer.
The included presets allow for beginners to quickly select a comfortable setting and get started in the world of racing, whereas more professional players have access to detailed and advanced configurations of their MOZA products should they wish to adjust.
One of our latest additions is the FFB Effect Equalizer, which allows for adjustments to give the best feeling of the road through the steering wheel as well as other surfaces (such as grass, or dirt).
Our one-click update system allows for a fast and seamless upgrade of the entire MOZA ecosystem, allowing users to quickly get into the action.
*For further software instructions, visit the official MOZA Racing website (www.mozarac-ing.com) help center page to download the latest instructions and manuals.
Product Parameters
- Supported Platform: PC
- Drive Form: Direct Drive
- Maximum Turning Angle: Unlimited
- Base Material: Aviation-grade Aluminum Alloy
- Base Color: Black
- Maximum Torque Output: 5.5 Nm
- Input Voltage: 100V~240V AC —>12V DC
- Resolution: 15-bit
- USB Refresh Rate: 1000Hz
- App Functionality: Supported
- Quick Release System: Supported
- Interface: Base, Power Port, Data Port, Display Support, Pedal Interface
- Accessories: Product Manual and Warranty Card, Power Supply, Data Cable, Toolkit Installation Method: 4 screws on the bottom of base.
- Desktop Mount: Included
- Online Firmware Upgrade Function: Supported
Bluetooth Connection
-
Open the “MOZA Racing” software and enter the app interface.
-
Click to authorize the use of Bluetooth and user protocol functions to enter the login interface.
Note: You need to download the app in advance, turn on Bluetooth on your phone, and authorize only the first login. -
After logging into the MOZA account, click on “Connect Device” and a Bluetooth connection will pop up. At this time, the base needs to be in a normal power-on state.
-
Check if the Bluetooth connection interface indicates that MOZA R5-xxx can be connected.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>