MOZA RACING 0.50.RSD031A FSR Formula Wheel User Manual
- June 4, 2024
- MOZA RACING
Table of Contents
0.50.RSD031A
FSR Formula Wheel
User Manual
https://support.mozaracing.com/en/support/solutions/70000321076
Product introduction
- 280mm width Formula-style Wheel
- 4.3-inch HD Display
- 12+ professional Formula-style Ul interfaces
- Hand-stitched perforated leather
- High-strength carbon fiber frame and shifters
- Aluminum Alloy Back Shell
- Carbon Fiber Photoelectric Double Clutch Paddles
- Quick Release System
- Flow RGB Shift Indicator Lighting
- Can be directly connected to PC via USB (optional)
- Ergonomic Design
- 10illuminated programmable mechanical keys
- 5band knobs, 2 thumb knobs, 2 universal joysticks
Quick Release Instructions
- Align the 6 steel balls on the steering wheel with the 6 grooves on the wheelbase
- Press the wheel into the wheelbase, keeping the balls aligned with each other
- The quick release will automatically snap into place, locking the wheel to the base. If the quick release does not lock, try rotating the panel on the base to its default position, and try again until it locks correctly
- To remove the wheel from the base, simply use two hands to pull back on the outer ring (black color) and pull the wheel out at the same time.
Wheel Configuration
Using MOZA Pit House, our software suite, the SR steering wheel can easily be set up and configured to your liking
- Clutch Paddle Mode: Set the operation of the clutch paddles, which can be configured to act together or independently of each other, also as a button input
- Joystick Mode: Joysticks can be configured as keys or buttons
- Indicator Light Switch: Allows for switching the indicator light off, on, or specific speed settings
- Indicator Light Display Mode: Divided into two modes, toggled in the MOZA Pt house suite
- Speed Adjustment: Adjustable according to speed and the timing of the shift indicator light, with different presets available
- Brightness Adjustment: Allows for adjusting the brightness of the shift indicator
- UI interface Configuration: You can switch Ulin the MOZA Pit House suite, or you can switch the Ul on the wheel directly by pressing the lower right dual-clutch paddle while moving the joystick left or right.
- Steering Wheel Combination Key Configuration: Click on the description of the combination key in the upper right corner of the steering wheel picture, allowing for adjustments of the function.
- Indicator Light Color Adjustment: Adjust the color of the MOZA Flow shifter according to your preferences.
- Screen Brightness: Adjust the brightness of the display on the steering wheel
- Speed Unit: Can be set to Metric or Imperial.
- Temperature Unit: Can be set to Celsius and Fahrenheit.
(For further information on specific steering
wheel settings or functions using the MOZA Pit House Suite, visit our official
website at www.mozaracing.com)
Key combination Description
Installation of Magnetic Shifter Silencers
Place the steering wheel on a flat working surface, with the front side facing
down. Use a hexagonal wrench to remove the screw on the side of the trigger
lever of the shift paddle, then use a wrench to carefully lift the latch from
the side of the magnetic paddle (NOTE: you do not need to push it out
completely, only the magnetic paddle. The trigger lever and the latch can be
separated). Apply the silencer pad on the back of the magnet hole and the
raised position on the back of the paddle trigger lever, as shown in the
figure, finally returning the latch into place, and replacing the screw
(Please do not apply the silencer pads below the raised position of the
trigger lever because this is the area of the paddle photoelectric sensor
switch and a silencer pad there will affect the normal use of shifter paddles)
as shown in the figure, finally return the latch into place, and tighten the
screws.
Packing list
- .FSR Racing Formula Wheel
- Tool kit: Hexagon screwdriver / Silencer Pads x4
- Portable cloth bag
Product parameters
Size: 280mm standard formula wheel
Display size: 4.3 Inches
Display Resolution: 800×480
Grip Material: Leather
Frame and Panel Material: 5mm thick carbon fiber
Shifter Material 3mm thick carbon fiber
Back Shell Material: Aviation-grade Aluminum Alloy
Shift Paddles: 2
Dual-clutch Paddles: 2
Illuminated Programmable Mechanical Keys: 10
Thumb Joysticks (pressable) 2
Band knobs. 5
LED RGB Beads: 10 LED
Count (Strip): 10 LEDs
Smart Telemetry: Supported
MOZA Pit House Light Configuration: Supported
Quick Release: Supported
Signal Transmission: Wireless
Shifter Mode: Photoelectric Contactless
Dual-clutch Paddle Mode: Simultaneous / Independent Axis / Button Input
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>