MOZA RACING FSR Racing Formula Wheel User Manual

MOZA RACING FSR Racing Formula Wheel

Product Introduction

The FSR Formula Wheel is a high-quality racing wheel designed for professional racing simulators. It features a 280mm standard formula wheel with a 4.3-inch display and 800×480 resolution. The grip is made of leather, while the frame and panel are made of 5mm thick carbon fiber. The shifter is made of 3mm thick carbon fiber, and the back shell is made of aviation-grade aluminum alloy. It comes with two dual-clutch paddles, two shift paddles, 10 programmable mechanical keys, 2 thumb joysticks, 5 band knobs, and 10 LED RGB beads.

• 280mm width Formula-style Wheel
• 4.3-inch HD Display
• 12+ professional Formula-style UI interfaces
• Hand-stitched perforated leather
• High-strength carbon fiber frame and shifters
• Aluminum Alloy Back Shell
• Carbon Fiber Photoelectric Double Clutch Paddles
• Quick Release System
• Flow RGB Shift Indicator Lighting
• Can be directly connected to PC via USB (optional)
• Ergonomic Design
• 10 illuminated programmable mechanical keys
• 5 band knobs, 2 thumb knobs, 2 universal joysticks

Quick Release Instructions

1. Align the 6 steel balls on the steering wheel with the 6 grooves on the wheelbase.
2. Press the wheel into the wheelbase, keeping the balls aligned with each other.
3. The quick release will automatically snap into place, locking the wheel to the base. If the quick release does not lock, try rotating the panel on the base to its default position, and try again until it locks correctly.
4. To remove the wheel from the base, simply use two hands to pull back on the outer ring (black color) and pull the wheel out at the  same time.

Wheel Configuration

The steering wheel and base are already paired at the factory, and when the steering wheel is loaded into the base, it automatically  connects to the base when it is powered on. For further information on specific steering wheel settings or functions using the MOZA Pit House Suite, visit our official website at www.mozaracing.com.

Using MOZA Pit House, our software suite, the FSR steering wheel can easily be set up and configured to your liking.

• Clutch Paddle Mode: Set the operation of the clutch paddles, which can be configured to act together or independently of each other, also as a button input
• Joystick Mode: Joysticks can be configured as keys or buttons
• Indicator Light Switch: Allows for switching the indicator light off, on, or specific speed settings
• Indicator Light Display Mode: Divided into two modes, toggled in the MOZA Pit house suite
• Speed Adjustment: Adjustable according to speed and the timing of the shift indicator light, with different presets available
• Brightness Adjustment: Allows for adjusting of the brightness of the shift indicator
• UI Interface Configuration: You can switch UI in the MOZA Pit House suite, or you can switch the UI on the wheel directly by pressing the lower right dual-clutch paddle while moving the joystick left or right.
• Steering Wheel Combination Key Configuration: Click on the description of the combination key in the upper right corner of the steering wheel picture, allowing for adjustments of the function.
• Indicator Light Color Adjustment: Adjust the color of the MOZA Flow shifter according to your preferences.
• Screen Brightness: Adjust the brightness of the display on the steering wheel.
• Speed Unit: Can be set to Metric or Imperial.
• Temperature Unit: Can be set to Celsius and Fahrenheit.

(For further information on specific steering wheel settings or functions using the MOZA Pit House Suite, visit our official website at www.mozaracing.com)
The steering wheel and base are already paired at the factory, and when the steering wheel is loaded into the base, it automatically connects to the base when it is powered on.

Key combination Description

Installation of Magnetic Shifter Silencers

Place the steering wheel on a flat working surface, with the front side facing down. Use a hexagonal wrench to remove the screw on the side of the trigger lever of the shift paddle, then use a wrench to carefully lift the latch from the side of the magnetic paddle (NOTE: you do not need to push it out completely, only the magnetic paddle. The trigger lever and the latch can be separated). Apply the silencer pad on the back of the magnet hole and the raised position on the back of the paddle trigger lever, as shown in the figure, finally returning the latch into place, and replacing the screw. (Please do not apply the silencer pads below the raised position of the trigger lever because this is the area of the paddle photoelectric sensor switch and a silencer pad there will affect the normal use of shifter paddles) as shown in the figure, finally return the latch into place, and tighten the screws

Packing list

1. FSR Racing Formula Wheel
2. Tool kit: Hexagon screwdriver / Silencer Pads x4
3. Portable cloth bag

Product parameters

• Size: 280mm standard formula wheel
• Display size: 4.3 Inches
• Display Resolution: 800×480
• Grip Material: Leather
• Frame and Panel Material: 5mm thick carbon fiber
• Shifter Material: 3mm think carbon fiber
• Back Shell Material: Aviation-grade Aluminum Alloy
• Shift Paddles: 2
• Dual-clutch Paddles: 2
• Illuminated Programmable Mechanical Keys: 10
• Thumb Joysticks (pressable): 2
• Band knobs: 5
• LED RGB Beads: 10 LED
• Count (Strip): 10 LEDs
• Smart Telemetry: Supported
• MOZA Pit House Light Configuration: Supported
• Quick Release: Supported
• Signal Transmission: Wireless
• Shifter Mode: Photoelectric Contactless
• Dual-clutch Paddle Mode: Simultaneous / Independent Axis / Button Inpu

Key Combination Description

• Left clutch paddle + press the left rocker: Switching the dashboard UI to the previous UI
• Right clutch paddle + toggle the left rocker to the left: Switching the dashboard UI to the previous UI
• Left clutch paddle + press the right rocker: Switching the dashboard UI to the next UI
• Right clutch paddle + toggle the left rocker to the right: Switching the dashboard UI to the next UI
• Left clutch paddle + press BB thumb knob or Left clutch paddle + press ERS thumb knob: Toggle button color
• Press both rockers at the same time: Switching left stick mode:  cross key / normal button

Installation of Magnetic Shifter Silencers

1. Place the steering wheel on a flat working surface, with the front side facing down.
2. Use a hexagonal wrench to remove the screw on the side of the trigger lever of the shift paddle.
3. Use a wrench to carefully lift the latch from the side of the magnetic paddle (note: you do not need to push it out completely, only the magnetic paddle. The trigger lever and the latch can be separated).
4. Apply the silencer pad on the back of the magnet hole and the raised position on the back of the paddle trigger lever.
5. Return the latch into place and replace the screw. Please do not apply the silencer pads below the raised position of the trigger lever because this is the area of the paddle photoelectric sensor switch and a silencer pad there will affect the normal use  of shifter paddles.

Packing List

1. FSR Racing Formula Wheel
2. Tool kit: Hexagon screwdriver / Silencer Pads x4
3. Portable cloth bag

Product Parameters

• Size: 280mm standard formula wheel
• Display size: 4.3 Inches
• Display Resolution: 800×480
• Grip Material: Leather
• Frame and Panel Material: 5mm thick carbon fiber
• Shifter Material: 3mm think carbon fiber
• Back Shell Material : Aviation-grade Aluminum Alloy
• Shift Paddles: 2
• Dual-clutch Paddles : 2
• Illuminated Programmable Mechanical Keys: 10
• Thumb Joysticks (pressable) : 2
• Band knobs: 5
• LED RGB Beads: 10
• LED Count (Strip): 10 LEDs
• Smart Telemetry: Supported
• MOZA Pit House Light Configuration: Supported
• Quick Release: Supported
• Signal Transmission: Wireless
• Shifter Mode : Photoelectric Contactless
• Dual-clutch Paddle Mode: Simultaneous / Independent Axis / Button Input

Product Usage Instructions

1. Align the six steel balls on the steering wheel with the six grooves on the wheelbase.
2. Press the wheel into the wheelbase, keeping the balls aligned with each other.
3. The quick release will automatically snap into place, locking the wheel to the base. If the quick release does not lock, try rotating the panel on the base to its default position, and try again until it locks correctly.
4. To remove the wheel from the base, use two hands to pull back on the outer ring (black color) and pull the wheel out at the same time.
5. To switch the dashboard UI to the previous or next UI, use the left clutch paddle with either the left or right rocker or the right clutch paddle with either the left or right rocker.
6. To toggle button color, press both rockers at the same time or press either BB or ERS thumb knob while holding down the left clutch paddle.
7. To switch left stick mode between cross key and normal button, press both rockers at the same time while holding down the left clutch paddle.
8. To install magnetic shifter  silencers, follow the instructions provided in section 5 of the user manual.
9. For further information on specific steering wheel  settings or functions using the MOZA Pit House Suite, visit our
   official website at www.mozaracing.com.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the  following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

References

• MOZA Racing Simulator Equipment | Sim Racing Wheel & Products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>