MOZA RACING CS Steering Wheel User Manual
- June 4, 2024
- MOZA RACING
Table of Contents
MOZA CS Steering Wheel Hold on Tight, Experience Real Racing
User manual
Product Introduction
- 13-inch standard racing rim
- Aviation-grade aluminum alloy frame
- Forged carbon fiber photoelectric magnetic paddle
- RG8 sequential shift indicator
- Programmable mechanical buttons
- Customized quick release from real racing
- Wireless power supply and communication technology
Quick Release Manual
- Match the 6 steel ball bearings on the female quick-release head of the steering wheel with the 6 grooves on the quick-release male head of the base
- Press the quick release to the direction of the wheel
- The quick release will automatically return to the position and lock up, if not you could try to rotate the wheel slightly or remove it and then reinstall it
- If you need to remove the wheel, press the black part with both hands, and pull out the wheel at the same time
Steering Wheel Configuration
You could set up the CS steering wheel quickly and easily in the MOZA Pit House software.
- Joystick mode: push buttons or cross keys
- Indicator switch mode: the indicator status has three modes which are matching rotating speed, off, and always on.
- Indicators display mode: mode 1 and mode 2. Detailed explanations will pop up when clicking each option.
- Rev speed prompt setting: there are four modes according to the timing relationship between the rev speed and the shift indicator light, which are advanced, standard, extreme, and custom modes.
- Brightness adjustment: adjust the brightness of the shift indicator.
- Indicator color adjustment: drag the color block you like to the indicator to change the color.
- Shifter paddle calibration: when sensing abnormalities in the shifter paddle, dick here to calibrate.
(For detailed steering wheel settings and functions, please visit the official website of MOZA Racing)
Install Heightening Block for Magnetic Paddle
Place the steering wheel on a flat surface facing down, use a hexagonal wrench
to remove the screw on the side of the trigger lever of the shift paddle, and
then use a wrench to lift the latch from the side of the magnetic paddle, and
pull the trigger lever of the paddle outward to obtain the best space for
disassembling and assembling paddles; use a hexagonal wrench to remove the
screws on the shift paddles, put on the heightening block and tighten with the
long screws, and finally put the latch back in place and clamp screws. The
heightening block could help shorten the distance between the magnetic shifter
paddles and hands by 8mm.
Install Heightening Block for Magnetic Paddle
Place the steering wheel on a flat surface facing down, use a hexagonal wrench
to remove the screw on the side of the shift paddle trigger lever, and then
use the wrench to lift the latch from the side of the magnetic paddle (No need
to push it out completely. Separating the magnetic paddle trigger lever and
the latch will do.) and then stick the silence pad on the back of the magnet
hole and the protruding position on the back of the trigger lever as shown in
the image and finally put the latch back in place and clamp screws.
Packing Details
- CS Steering Wheel
- Tool kit: Hexagonal Wrench / 8mm aluminum heightening block x 2 / Silence pad x 4
Product Parameters
Grip Material: microfiber leather
Frame Material: Aluminum
Face Plate Material: aluminum Magnetic paddle Material: forged carbon fiber
Size: 13 inch
Magnetic Paddle: 2 pcs
Mechanical Keys: 6 Front-Facing knobs: 2 pcs (20-segment
embedded steel ball type)
Universal Joystick: 2 pcs (pressable)| Highlighted LED RGB Light Beads: 10 pcs
LED Color: 7 colors for customization
Intelligent Telemetry: yes
Adjust Lighting through MOZA Pit House: yes
Quick Release: yes
Power Supply Method: Wireless
Signal Transmission Method: Wireless
Magnetic paddle sensor: contact-less
photoelectric sensor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>