MOZA RACING mozaRS10 CS V2 Steering Wheel User Manual

June 9, 2024
MOZA RACING

MOZA RACING mozaRS10 CS V2 Steering Wheel

MOZA-RACING-mozaRS10-CS-V2-Steering-Wheel-fig-1

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

Product Introduction

  • 13-inch standard racing rim
  • Aviation grade aluminium alloy frame
  • Forged carbon fiber photoelectric magnetic paddle
  • RGB sequential shift indicator
  • Programmable mechanical buttons
  • Customized quick release from real racing
  • Wireless power supply and communication technology

Quick Release Manual

  1. Match the 6 steel ball bearings on the female quick release head of the steering wheel with the 6 grooves on the quick release male head of the base.
  2. Press the quick release to the direction of the wheel
  3. The quick release will automatically return to the position and lock up, if not, you could try to rotate the wheel slightly or remove it and the reinstall it
  4. If you need to remove the wheel, press the black part with both hands, and pull out the wheel at the same time

MOZA-RACING-mozaRS10-CS-V2-Steering-Wheel-fig-2

Steering Wheel Configuration

You could set up the CS steering wheel quickly and easily in the MOZA Pit House software.

  • Joystick mode: push the buttons or cross keys
  • Indicator switch mode: the indicator status has three modes which are matching rotating speed, off and always on.
  •  Indicators display mode: mode 1 and mode 2. Detailed explanations will pop up when clicking each option.
  • Rev speed prompt setting: there are four modes according to the timing relationship between the rev speed and the shift indicator light, which are advanced, standard, extreme, and custom mode.
  • Brightness adjustment: adjust the brightness of the shift indicator.
  • Indicator colour adjustment: drag the colour block you like to the indicator to change the colour.
  • Shifter paddle calibration: when sensing abnormalities in the shifter paddle, click here to calibrate.

MOZA-RACING-mozaRS10-CS-V2-Steering-Wheel-fig-3
MOZA-RACING-mozaRS10-CS-V2-Steering-Wheel-fig-4
(For detailed steering wheel settings and functions, please visit the official website of MOZA Racing)

Install Heightening Block for Magnetic Paddle

Place the steering wheel on a flat surface facing down, use a hexagonal wrench to remove the screw on the side of the trigger lever of the shift paddle, and then use a wrench to lift the latch from the side of the magnetic paddle, and pull the trigger lever of the paddle outward to obtain the best space for disassembling and assembling paddles; use a hexagonal wrench to remove the screws on the shift paddles, put on the heightening block and tighten with the long, screw and finally put the latch back in place and clamp screws. The heightening block could help shorten the distance between the magnetic shifter paddles and hands by 8mm.

MOZA-RACING-mozaRS10-CS-V2-Steering-Wheel-fig-5

Install Heightening Block for Magnetic Paddle

Place the steering wheel on a flat surface facing down, use a hexagonal wrench to remove the screw on the side of the shift paddle trigger lever, and then use the wrench to lift the latch from the side of the magnetic paddle (No need to push it out completely. Separating the magnetic paddle trigger lever and the latch will do.) and then stick the silence pad on the back of the magnet hole and the protruding position on the back of the trigger lever as shown in the image and finally put the latch back in place and clamp screws.

MOZA-RACING-mozaRS10-CS-V2-Steering-Wheel-fig-6

Packing Details

  • CS Steering Wheel
  • Tool kit: Hexagonal Wrench / 8mm aluminium heightening block x 2 / Silence pad x 4

Product Parameters

Grip Material: Microfiber leather
Frame Material: Aluminium
Face Plate Material: Aluminium
Magnetic paddle Material: Forged carbon fiber
Size 13 inches
Magnetic Paddle: 2 pcs
Mechanical Keys: 6
Front-Facing knobs: 2 pcs (20-segment embedded steel ball

type)

Universal Joystick:| 2 pcs (pressable)
Highlighted LED RGB Light Beads:| 10 pcs
LED Colour:| 7 colours for customization
Intelligent Telemetry:| Yes
Adjust Lighting though MOZA Pit

House:

| Yes
Quick Release:| Yes
Power Supply Method:| Wireless
Signal Transmission Method:| Wireless
Magnetic paddle sensor:| Contact-less photoelectric sensor

Warranty Conditions

  • A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
  • The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
    • Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
    • Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
    • Natural wear and aging of consumables or components during use (such as batteries, etc.).
    • Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
    • If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

  • Identification data of the manufacturer’s / importer’s authorized representative:
    • Importer: Alza.cz a.s.
    • Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
    • CIN: 27082440
  • Subject of the declaration:
    • Title: Steering wheel
    • Model / Type: Moza CS Steering wheel
  • The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
    • Directive No. 2014/53/EU
    • Directive No. 2011/65/EU as amended 2015/863/EU

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals