GOLDEN VISION Smart Life App For Low Power Solar Camera User Guide

: July 20, 2024
: Golden Vision

Table of Contents

GOLDEN VISION Smart Life App For Low-Power Solar Camera
Product Usage Instructions
FAQ
Product Introduction
Basic Parameters
Component Description
Install APP
Add The Device-Scan QR code mode
Add The Device-AP Mode
Matters Need Attention
FCC Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GOLDEN VISION Smart Life App For Low-Power Solar Camera

GOLDEN-VISION-Smart-Life-App-For-Low-Power-Solar-Camera-
PRODUCT

Specifications

Product name: Low-power solar camera
Pixel: 3 million pixels
Video compression: H265 High Profile
Image enhancement: digital wide dynamic 3D noise reduction
Local storage: MicroTF card
Support platform: Android/iOS
Wireless encryption: WPA/WPA2 encryption
Wireless connection: 2.4G 802.11 b/g/n
Human detection: PIR
Power input: Solar panel /Type-C
Battery: 2pcs 18650 LION batteries

Product Usage Instructions

Install APP

Download the Smart Life APP by scanning the QR code provided in the manual. Register and log in following the prompts in the app.

Add The Device – Scan QR Code Mode

Follow the on-screen instructions to add the camera to the app using the QR code mode. Make sure you are connected to a 2.4 GHz Wi-Fi network.

Add The Device – AP Mode

Follow the provided instructions in the manual to add the device using AP mode.

Matters Need Attention

Ensure the camera is away from metal spaces, furniture, and microwave ovens.
Keep it away from audio, video, and data lines. Ensure it is close to the Wi-Fi signal coverage area.
If switching network environments, press the reset hole for about 5 seconds before reconnecting.

FAQ

Q: What type of wireless encryption does the camera support?

A: The camera supports WPA/WPA2 encryption for wireless connections.

Q: Can I use a MicroTF card lower than 8GB with this camera?

A: It is recommended to use an 8-128GB high-speed Micro TF card for storing historical videos and firmware upgrading support.

Q: How do I reset the camera?

A: Long press the reset hole for 5 seconds to reset the camera.

Thank you for using the low-power solar camera

Product Introduction

Packing list: low power solar camera x1, manual x1, wall plate x1, screw accessories package x1

Basic Parameters

Product name: Low-power solar camera
Pixel: 3 million pixels
Video compression: H265 High Proﬁle
Image enhancement: digital wide dynamic 3D noise reduction
Local storage: MicroTF card
Support platform: Android/iOS
Wireless encryption: WPA/WPA2 encryption
Wireless connection: 2.4G 802.11 b/g/n
Human detection: PIR
Power input: Solar panel /Type-C
Battery: 2pcs 18650 LION batteries

Component Description

Reset Button: Long press “reset” hole 5sec, reset success.
It is recommended to insert an 8-128GB high-speed Micro TF card, otherwise, it will not be able to store, view historical video, and support Important functions such as ﬁrmware upgrading.

Install APP

Download APP: scan the QR code below to download and install.
Register and log in: open the ” Smart Life” APP to register and log in according to the prompts.

Add The Device-Scan QR code mode

Make sure Wi-Fi is available and connected to the Internet.
Connect the camera to the power, and then the system startup is completed.
Open the “Smart Life” APP, press the’+’ in the upper right corner of the main screen (Figure 01); choose “Security & Sensor”、click “Smart Camera” (Figure 02) to add a camera, and then click “Next step” (Figure 03);

Please note that only a 2.4 GH Wi-Fi network is supported;

A QR code will prompt on your screen and you need to scan it with the Smart Camera. (the camera is about 20-30 cm away from the mobile phone lens). Then click “hear the prompt sound” (Figure. 07. connecting” (Figure. 08);
connection completed(Figure 09), and click “Finish”;
Then jump to the preview interface (Figure 10)
After closing the device preview interface, the interface returns to the APP home page. At this time, the connected device will appear on the APP home page (Figure 11).
Then you can click directly to the device interface to see the monitoring situation without re-adding afterwards.

Add The Device-AP Mode

Select “Wi-Fi Mode Click Next (Figure 12)
Select “AP Mode” (Figure 13)
Enter the account and password that can connect to WIFI (Figure 14)
Click “Go Connect” (Figure 15)
Go to “Smartl IF-XXXX “and click Connect (Figure 16)
Connecting (Figure 17)
Click to complete the connection (Figure 18)
Video screen (Picture 19)

Matters Need Attention

Try to keep away from the metal space.
Avoid the furniture, and microwave oven blocked.
Avoid the space where the audio, video, and data lines are wound, and keep the space away from them as large as possible.
Ensure that as close as possible to the coverage of wireless Wi-Fi signals. Switching network environment.
In the new network environment, please press the reset hole for about 5 seconds, then connect to the network.
The name and content of the harmful substances in the product.
This product conforms to RoHS environmental protection requirements. At present, there is no mature technology in the world to replace or reduce the lead content in electronic ceramics. porcelain, optical glass, steel, and copper alloy.

FCC Statement

FCC SDoC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
ln, crease the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure information:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator &your body.