Golden Vision BL1 Smart Pet Food Dispenser User Manual

October 31, 2023
Golden Vision

Golden Vision BL1 Smart Pet Food Dispenser

Golden-Vision-BL1-Smart-Pet-Food-Dispenser-image

Product Information

The PET NANNY SMART PET FOOD DISPENSER is a smart automatic treat dispenser designed for pets. It allows you to schedule and control your pet’s feeding through the Smart Life App. The dispenser is suitable for dry pet food only, with a diameter of 8-12mm. It comes with a top cover, bottom cover, indicator light, video speaker, treat port, reset button, power interface, and various accessories including an adapter, cable, and manual.

Product Usage Instructions

  1. Open the upper lid of the dispenser and remove the power cord adapter from the grain bucket.
  2. Plug the power cord into the power connector behind the host and connect the adapter to a power source to turn on the dispenser.
  3. Add dry pet food to the feeder dispenser.
  4. Ensure the dry pet food is round or oval-shaped and has a diameter below 8-12mm.
  5. Bind the device to the Smart Life App to set up your pet’s feeding schedule and planning.

Note: Make sure to download and install the Smart Life App before proceeding with the device setup. Follow the instructions provided in the manual for app download, installation, and registration.

Precautions

  • Place the device correctly to prevent pets from tipping it over.
  • Keep the food bucket dry and sealed, regularly checking for any food residue.
  • Do not put substances other than dry pet food into the food bucket as it may cause equipment malfunction or safety issues for your pet.
  • To prevent spills, it is recommended to place the dispenser in a corner or against a wall.
  • Ensure the tearproof bite wire is installed as concealed as possible to avoid damage caused by pets biting it.
  • If children use the device, it should be under the guidance of an adult.
  • Clean the buckets and bowls regularly.
  • This device is not recommended for pets younger than three months.

For any maintenance needs or troubleshooting, refer to the maintenance records section in the manual, which includes details on maintenance time, fault conditions, fault causes, and troubleshooting steps. If necessary, there are provisions for return and exchange as well.

Catalogue

Please read this manual carefully before use to ensure safe use of the smart automatic treat dispenser.

Accessories list (subject to the actual product)

  • adapterX1
  • cableX1
  • manualX1

Product Description

Golden-Vision-BL1-Smart-Pet-Food-Dispenser-fig3

Installation Steps

  1. Open the upper lid and remove the power cord adapter in the grain bucket.
  2. Plug the power cord into the power connector behind the host and connect the adapter to power on.
  3. Add dry pet food to the feeder dispenser.
  4. Suitable for dry food round/oval below 8-12mm
  5. Bind the device on the smart life APP to set up your pet’s feeding and planning.

OPERATING TIPS – Suitable for dry food only.

Bind Smart Life APP

APP download and installation
Scan the QR code below to download the Smart Life app and complete the installation.

Golden-Vision-BL1-Smart-Pet-Food-Dispenser-fig4

Regis-tered APP
Open the installed smart life App and follow the prompts to register

Quick Configuration

Golden-Vision-BL1-Smart-Pet-Food-Dispenser-
fig6

Open the APP and follow the steps in the picture to connectGolden-Vision-BL1
-Smart-Pet-Food-Dispenser-fig7

Video Version Pet Feeder ConfigurationGolden-Vision-BL1-Smart-Pet-Food-
Dispenser-fig8

Open the APP ,click “add device”-“Security& Sensor”-“Smart Camera”,enter wifi password and confirm, connecting till “device added successfully”.Golden-
Vision-BL1-Smart-Pet-Food-Dispenser-fig9 (APP interface introduction)

Golden-Vision-BL1-Smart-Pet-Food-Dispenser-fig10

Precautions

  1. Please place the device correctly; Prevent pets from tipping over the device.
  2. Please keep the food bucket dry and sealed, and check regularly to ensure food residue
  3. Do not drop all substances except pet dry food into the food bucket, otherwise it will cause abnormal use of the equipment and even cause pet safety problems.
  4. To prevent pets from spilling the product, it is recommended to place it in a corner or against a wall.
  5. The product tearproof bite wire is installed as concealed as possible to avoid damage to the equipment caused by pets biting the wire.
  6. If children use this device, please ensure that it is under the guidance of an adult.
  7. Buckets and bowls should be cleaned regularly
  8. This device is not recommended for pets within three months
  • Maintenance records:
  • Maintenance time:
  • Fault conditions:
  • Fault cause:
  • Trouble shooting:
  • Return and exchange proof:
  • Date of validity:
  • Original device ID:
  • New device ID:
  • Maintenance personnel signature:
  • Maintenance Department seal:

FCC Statement

This equipment has been tested and found to comply with the limits for a Class 8 digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Th is equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • In crease the separation between the equipment and receiver .
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals