Golden Vision T1 Smart Camera User Manual
- June 5, 2024
- Golden Vision
Table of Contents
**Golden Vision T1 Smart Camera User Manual
**
Product Introduction
Packing list: Smart Camera x 1, Manual x 1, Power Adapter x 1, Screw Accessories Package x 1
-
Smart Camera
-
Screw Accessories Package
-
Manual
-
Power Adapter
Basic Parameters
Product Name :Smart Camera
Pixel| 3.0MP| Wireless Encryption: WEP/WPA/WPA2 Encryption
2.0MP| Power Input: 5V 1A(Min)
Video compression| H.265 High Profile
H.664 High Profile
Image Enhancement :Digital Wide Dynamic 3D Noise Reduction| Total Power
Consumption: 5W (Max)
Local Storage: MicroSD Card| Wireless Standard : 2.4G 802.11 b/g/n
Support Platform: Andriod/iOS
| The Light:| Full Color Night Vision
Infrared Night Vision
Component Description
Reset Button: Long Press”reset” Hole 5sec Success.
It is Recommended To Insert 8-128GB High-Speed Micro SD Card, Otherwise It Will Not Be Abl To Store ,View Historical Video and Support Important Functions Such As Firmware Upgrading
**Install APP
**
Download App:Scan the QR Code Below to Download and Install.
Register and Login: Open the “Smart Life” APP To Register and Login According
To The Prompts.
Add The Device-Scan QR code mode
-
Make sure Wi-Fi is available and connected to the Internet.
-
Connect the camera to the power. then system startup completed.
-
Open “Smart Life” APP, press the’+’ in the upper right corner of the main screen (Picture 01); choose “Security & Sensor”, click “Smart Camera” (Picture 02) to add camera: and then click “Next step” (Picture 03)
-
If the mobile phone is not connected to wi-fi. please click “Connect to Wi fi” (Picture 04);
-
It will skip to the WLAN interface and connects Wi-Fi (Picture 05).Please note that only 2.4 GH Wi-Fi network is supported;
-
If the phone is connected to Wi-Fi (Picture 06);
-
A QR code will prompt on your screen and you need to scan it with the Smart Camera. (the camera is about 20-30 cm away from the mobile phone lens). Then click “hear the prompt sound” (Picture. 07.
-
“connecting” (Picture. 08);
-
connection completed(Picture 09), and click “Finish”;
-
It will skip to preview interface (Picture 10)
-
After closing the device preview interface, the interface returns to the APP home page. At this time, the connected device will appear on the APP home page (Picture 11). Then you can click directly to the device interface to see the monitoring situation without re-adding afterwards.
The light
Machine distinction: with light and with out light. Machine with lights, operation diagram.
Other Connection Methods
-
QR Code
Camera Aiming At QR Code -
AP Mode
Mobile Phone Search Machine Signal Code -
EZ Mode
Mobile APP–wifi–Search Machine
Matters Need Attention
Try To Keep Away From The Metal Space:
Avoid The Furniture , Microwave Oven Blocked:
Avoid The Space Where The Audio,Video And Data Lines Are Wound, And Keep The
Space Away From Them As Large As Possible:
Ensure That As Close As Possible To The Coverage Of Wireless Wi-Fi Signals
.Switching Network Environment ,Please Press The Reset Hole About 5 Seconds
,Then Connect To The Network.
The name and content of the harmful substances in the product
| Harmful Substance
---|---
Part
Name
| pb| Hg| Cd| Cr(Vl)| PBB| PBDE
shell| 0| 0| 0| 0| 0| 0
Board| X| 0| 0| 0| 0| 0
charger| 0| 0| 0| 0| 0| 0
annex| 0| 0| 0| 0| 0| 0
This form is based on the provisions of SJ/T 113640
This product conforms to RoHS environmental protection requirements. At present, there is no mature technology in the world to replace or reduce the lead content in the electronic ceramics. porcelain, optical glass. steel and copper alloy.
Maintenance records: ————————————————————-
Maintenance time:——————————————————————
Fault conditions:——————————————————————–
Fault cause:————————————————————————-
Troubleshooting :——————————————————————-
Return and exchange proof: ——————————————————
Date of validity: ——————————————————————–
Original device ID:——————————————————————
New device ID: ———————————————————–
maintenance personnel signature: ————————————–
Maintenance Department seal: ——————————————
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- In crease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information:
This Equipment Complies with FCC Radiation Exposure Limits Set Forth For An
Uncontrolled Environment .This Equipment Should Be Installed And Oprated With
Minimum Distance 20cm Between The Radiator And Your Body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>