STEP2 8669 Whisper Ride Cruiser User Manual
- May 15, 2024
- Step2
Table of Contents
STEP2 8669 Whisper Ride Cruiser
Product Specifications
- Brand: Step2
- Product Name: Whisper Ride Cruiser
- Age Range: 18 months to 48 months
- Manufacturer: The Step2 Company, LLC.
- Address: 10010 Aurora-Hudson Rd. Streetsboro, OH 44241 USA
- Contact: 1-800-347-8372 (USA & Canada Only) / (330)656-0440
- Website: www.step2.com
Product Usage Instructions
Safety Information:
- Do not use the product until it is properly assembled.
- Keep hands, feet, loose clothing, and long hair away from moving parts.
- Ensure children are seated securely with the seatbelt across their waist.
Disposal Instructions:
Please recycle when possible. Disposal must comply with all government regulations.
Product Inspection:
Inspect the product before each use. Tightly secure connections and replace damaged or worn components. Contact The Step2 Company, LLC. for replacement parts if needed.
Assembly Tips:
- Product has no pre-drilled holes. Screws will create their own holes when assembled. Apply pressure during assembly.
- If locking pins do not engage, manually spread them to secure.
- Start a small hole before using a screwdriver to attach components like the windshield.
Maintenance:
Fully tighten the Lock Nut with an adjustable wrench until approximately three threads extend beyond the nut. Do not over tighten to avoid product damage. The handle is not meant to be removed.
Frequently Asked Questions
- Q: What age range is the Whisper Ride Cruiser suitable for?
- A: The Whisper Ride Cruiser is intended for children aged 18 months to 48 months.
- Q: Are hot beverages allowed in the Whisper Ride Cruiser?
- A: No, the product is not intended for hot beverages.
- Q: What should I do if the locking pins do not engage during assembly?
- A: If the locking pins do not engage, place a finger in the shaft hole and manually spread the locking pins to secure them.
- Q: How should I dispose of the product?
- A: Please recycle when possible and ensure disposal is in compliance with all government regulations.
Intended for use by children from ages 18 months to 48 months. OBSERVE ALL STATEMENTS AND WARNINGS TO REDUCE THE LIKELIHOOD OF SERIOUS OR FATAL INJURY. SAVE THIS SHEET FOR FUTURE REFERENCE
WARNING:
CHOKING HAZARD Small parts & sharp points present before assembly. Adult assembly required.
WARNING:
BURN HAZARD
- Always check the temperature of the product before letting your children play on it.
- Remember that the product may cause burns.
- Always be aware of the sun and weather conditions, and do not assume that the equipment is safe because the air temperature is not very high.
WARNING:
TO AVOID SERIOUS INJURY:
- Provide adult supervision at all time.
- Do not use in areas unsafe for pedestrians.
- Do not use on steps or steep inclines where product could roll away.
- Keep away from pools or other bodies of water.
- Shoes must be worn during use.
- Allow only one rider per seat.
- Periodically check the handle and hardware for wear and proper assembly.
- Bottle Holder can only contain bottled water. Not intended for hot beverages.
CLEANING INSTRUCTIONS
- Use a 50/50 mixture of white vinegar and water.
DECAL APPLICATION:
Clean and dry area thoroughly. Center decal in area. Apply pressure from center to outer edge.
SAFETY INFORMATION
- Use only for children from ages 18 months to 48 months.
- Do not exceed 50lbs (22,68kg) on seat. Limit: 1 child.
- Instruct children:
- not to use product until properly assembled.
- to keep hands, feet, loose clothing and long hair away from the wheels during use.
- DO NOT remove any screws once installed. For disassembly, only remove parts not secured by screws.
- DO NOT over-tighten screws or they will not hold parts together appropriately.
- Take notice that screws are designed to pierce the plastic and form their own threads.
- Seat belt is only intended to keep child seated. Fasten securely across waist.
DISPOSAL INSTRUCTIONS
Please recycle when possible. Disposal must be in compliance with all government regulations. INSPECT THIS PRODUCT BEFORE EACH USE. TIGHTLY SECURE CONNECTIONS AND REPLACE DAMAGED OR WORN COMPONENTS. CONTACT THE STEP2 COMPANY, LLC. FOR REPLACEMENT PARTS. WHISPER RIDE CRUISER™
The Step2 Company, LLC.
10010 Aurora-Hudson Rd. Streetsboro, OH 44241 USA
- 1-800-347-8372 USA & Canada Only
- (330)656-0440
- www.step2.com
Parts
REQUIRED
REQUIRED (Not Included)
PLEASE NOTE: Product has no holes. Screws form their own. Apply pressure. Scan QR code for screw installation tips.
Installation Instruction
If locking pins do not engage, place finger in the shaft hole and manually spread the locking pins to engage
It is recommended to start a small hole before using screwdriver to attach the windsheild.
Fully tighten the Lock Nut with an adjustable wrench until approximately three threads extend beyond the nut (see above). Over tightening may result in damaging the product. HANDLE IS NOT MEANT TO BE REMOVED.
The red knob is intended to stay installed into handle at all times. Do not
remove. If pulled out, reinstall and snap into handle 
Holder in handle is for bottled water only. Not intended for hot beverages
Decal Application
The Step2 Company, LLC.
- 10010 Aurora-Hudson Rd.
- Streetsboro, OH 44241 USA
- 1-800-347-8372 USA & Canada Only
- (330)656-0440
- www.step2.com