GETINGE XEN Xcelerate Plus Lumen Instruction Manual
- July 17, 2024
- GETInGE
Table of Contents
GETINGE XEN Xcelerate Plus Lumen Instruction Manual
Package Content
Ophthalmic Instruments
Robotic Instruments
Flexible Scopes
Rigid Scopes
Pretreatment
Instructions for Use
XEN Accelerate+ Lumen is a ready-to-use, nonenzymic, pH-neutral pretreatment foam formulated for point-of-use treatment of medical instruments and devices, including ophthalmic equipment, prior to transport. Accelerate+ Lumen prevents the drying of surgical soils and assists the cleaning process.
The water-based foam spray breaks down quickly for better visibility of sharps. Accelerate+ Lumen features a fine tube attachment for treating lumen instruments.
| Order no. | Description |
|---|---|
| 6036005601 | Accelerate+ Lumen 1 x 17 oz. |
Directions for Use
- Place instruments into transport container. Ensure box locks and hinges are open and instruments are separated and disassembled per manufacturer’s IFU.
- Shake bottle before use.
- Keeping the sprayer upright, insert the Xcelerate+ nozzle into the lumen and spray until foam is seen emerging from the distal end.
- Immediately after use and prior to transport, spray generously on soiled instruments, ensuring complete coverage. If soil has already dried, leave Xcelerate+ Lumen on instruments for a minimum of 1 hour.
- Prior to the next reprocessing step, rinse instruments thoroughly to remove any residual soils and product.
Caution
-
Do not mix with other chemicals.
-
Thoroughly rinse instruments prior to subsequent reprocessing step.
-
Wear correct PPE and follow applicable guidelines.
Additional information on SDS. -
Check material compatibility before use.
Dispose of contents and container in accordance with local, regional, national, and international regulations.
Contains xanthan gum and sodium xylene sulphurated.
For more ingredient information, visit www.getinge.com
Warning: Contains gas under pressure; may explode if heated. Protect from sunlight. Store in a well-ventilated place.
Storage Information
Store in a cool, dry place protected from frost and away from acids and strong
oxidizing agents. Store upright in original containers. Optimum storage
temperature 41°F–77°F/5°C–25°C.
Xcelerate+ Lumen
| • | Aluminum |
|---|---|
| • | Anodized Aluminum |
| • | Titanium |
| • | Copper |
| • | Brass |
| • | Gold |
| • | Nickel |
| • | Cobalt Chrome |
| • | Matte chrome plated |
| • | Stainless steel |
| • | Glass |
| • | Ceramics |
| • | Rubber |
| • | Plastic |
| • | Teflon™/ PTFE |
| • | Polycarbonate |
- = The product is suitable for the material
- = Pay special attention to the guidelines from the instruments/device manufacturer
Teflon™ is a trademark of Chemours.
Getinge is a registered trademark of Getinge AB or its subsidiaries or
affiliates in the United States or other countries.
Copyright 2024 Getinge AB or its subsidiaries or affiliates. • All rights
reserved.
Manufacturer: Quadralene Ltd, Unit 3, St. Modwen Park, Andressey Way,
Derby, DE21 6YH, United Kingdom.
Sales Office, US: 1 Geoffrey Way, Wayne, NJ 07470, USA
Sales Office, Canada: 90 Matheson Blvd West, Suite 300, Mississauga,
Ontario L5R 3R3, Canada
www.getinge.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>