GETINGE Servo-c Mechanical Ventilator User Guide
- June 15, 2024
- GETInGE
Table of Contents
GETINGE Servo-c Mechanical Ventilator
Specifications
- Product Name: Servo-c
- Power Source: Plug-in power cord
- Ventilation Types: Invasive and non-invasive
- Patient Categories: Adult and pediatric
- Weight Monitoring: Tidal Volume in ml/kg
- Alarm Priority Levels: High, Medium, Low
Product Usage Instructions
Setting up the Servo-c
- Plug in the power cord.
- Switch ON the ventilator by pulling the ON/OFF switch downwards.
- Connect the oxygen and air hoses.
- Lock the wheels on the cart.
- Start the PRE-USE CHECK by following the on-screen instructions. Note that you will need the test tube during this check. The patient circuit test is included but can also be selected separately.
- Choose the PATIENT CATEGORY: adult or pediatric.
- Choose the VENTILATION TYPE: invasive or non-invasive (optional).
- Calculate Predicted Body Weight (PBW) automatically by tapping PBW and entering patient gender and height. For pediatric patients, enter the patient’s weight. Tidal Volume in ml/kg will now be monitored.
- Tap VENTILATION MODES. If you tap and hold on a mode, you will get more information.
- Choose a mode and adjust the settings accordingly.
- Some settings have dynamic images.
- The safety scale can be expanded by tapping on it.
- Change the alarm limits in the alarm window.
- Tap START VENTILATION to begin.
For more detailed information, refer to the user’s manual.
FAQ
-
Q: What are the alarm priority levels?
A: The alarms can be in one of three colors depending on priority: High priority, Medium priority, or Low priority. -
Q: How can I adjust alarm limits in controlled modes?
A: Tap on the active alarm and you can adjust alarm limits directly. -
Q: How do I stop ventilation?
A: Tap Standby and then tap and hold to stop ventilation. -
Q: Where can I find additional values and settings?
A: Additional values and settings can be found at www.getinge.com.
Setting up the Servo-c
-
Plug in the power cord.
-
Switch ON the ventilator.
NOTE: When switching on the Servo-c, you need to first pull the ON/OFF switch downwards. -
Connect the oxygen and air hoses.
-
Lock the wheels on the cart.
-
Start the PRE-USE CHECK. Follow on-screen instructions. (You need the test tube during the Pre-Use Check). The patient circuit test is included in the Pre-Use Check, but can also be selected separately.
-
Choose PATIENT CATEGORY: adult or pediatric.
-
Choose VENTILATION TYPE: invasive or non-invasive (optional).
-
Calculate Predicted Body Weight (PBW) automatically by tapping PBW and entering the patient’s gender and height. (For the pediatric patient category it is the patient’s weight). Tidal Volume in ml/kg will now be monitored.
-
Tap VENTILATION MODES. (If you tap and hold on to the mode you will get more information).
-
Choose mode and adjust the settings.
-
Some settings have dynamic images.
-
The safety scale can be expanded by tapping .
-
Change the alarm limits in the alarm window.
-
Tap START VENTILATION.
NOTE:
Alarms can be in one of three colors depending on priority:
- High priority
- Medium priority
- Low priority
This document is intended to provide information to an international audience outside of the US. Servo-c may be pending regulatory approvals to be marketed in your country. Contact your Getinge representative for more information. Manufacturer · Maquet Critical Care AB · Röntgenvägen 2 SE-171 54 Solna · Sweden · +46 (0)10 335 73 00 www.getinge.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>