GETINGE Xcelerate Foam Spray Instructions
- July 20, 2024
- GETInGE
Table of Contents
GETINGE Xcelerate Foam Spray
Product Specifications:
- Product Name : XEN Xcelerate
- Type : Pretreatment Foam
- Size: 16 fl. oz.
- pH: Neutral
- Formulation: Ready-to-use foam
- Manufacturer: Quadralene Ltd
Product Usage Instructions
- Place instruments into a transport container. Ensure proper disassembly as per the manufacturer’s instructions.
- Shake the bottle before use to ensure proper mixing.
- Turn the spray head nozzle to the ON position.
- Spray generously on soiled instruments, ensuring complete coverage. For dried soils, leave Xcelerate on for at least 1 hour.
- Rinse instruments thoroughly before the next reprocessing step to remove any remaining soils and products.
Caution:
Dispose of contents and containers following local, regional, national, and international regulations. Contains xanthan gum. For more ingredient information, visit www.getinge.com.
Storage Information:
Xcelerate can be used on a variety of materials including Aluminum, Titanium, Stainless steel, Glass, Rubber, Plastic, and more. Follow manufacturer guidelines when using on specific instruments/devices.
Manufacturer Information:
Quadralene Ltd, Unit 3, St. Modwen Park, Andressey Way, Derby, DE21 6YH, United Kingdom.
Sales Office, US: 1 Geoffrey Way, Wayne, NJ 07470, USA
Sales Office, Canada: 90 Matheson Blvd West, Suite 300, Mississauga, Ontario L5R 3R3, Canada
FAQ
- Q: Can Xcelerate be used on all types of medical instruments?
- A : Xcelerate is suitable for use on a wide range of medical instruments including ophthalmic equipment, orthopedic instruments, robotic instruments, flexible scopes, and rigid scopes. Always follow manufacturer’s guidelines for compatibility.
- Q: Is Xcelerate environmentally friendly?
- A : Xcelerate is a pH-neutral foam that is water-based and formulated to be environmentally friendly. It is important to dispose of the contents and container properly according to regulations.
Instructions for Use
XEN Xcelerate is a ready-to-use, pH-neutral, pretreatment foam formulated for
point-of-use treatment of medical instruments and devices, including
ophthalmic equipment, prior to transport. Xcelerate penetrates and loosens
surgical soils, prevents them from drying and enhances the cleaning process.
The water-based foam spray breaks down quickly for better visibility of
sharps.
Order no. /Description
6036002401 /Xcelerate 1 x 16 fl. oz.
Directions for Use
- Place instruments into a transport container. Ensure box locks and hinges are open and instruments are separated and disassembled per manufacturer’s IFU.
- Shake the bottle before use.
- Turn the nozzle of the spray head to the ON position.
- Immediately after use and prior to transport, spray generously on soiled instruments, ensuring complete coverage. If soil has already dried, leave Xcelerate on instruments for a minimum of 1 hour.
- Prior to the next reprocessing step, rinse instruments thoroughly to remove any residual soils and product.
Caution
- Do not mix with other chemicals.
- Thoroughly rinse instruments prior to the subsequent reprocessing step.
- Wear correct PPE and follow applicable guidelines. Additional information on SDS.
- Check material compatibility before use.
Dispose of contents and containers in accordance with local, regional, national, and international regulations. Contains xanthan gum. For more ingredient information, visit www.getinge.com
Storage Information
Store in a cool, dry place protected from frost and away from acids and strong oxidizing agents. Store upright in original containers. Optimum storage temperature 41°F–77°F/5°C–25°C.
Xcelerate
- = The product is suitable for the material
- = Pay special attention to the guidelines from the instruments/device manufacturer
Teflon™ is a trademark of Chemours.
Getinge is a registered trademark of Getinge AB or its subsidiaries or
affiliates in the United States or other countries.
Copyright 2024 Getinge AB or its subsidiaries or affiliates.
All rights reserved.
Manufacturer : Quadralene Ltd, Unit 3, St. Modwen Park, Andressey Way,
Derby, DE21 6YH, United Kingdom.
Sales Office, US : 1 Geoffrey Way, Wayne, NJ 07470, USA
Sales Office, Canada : 90 Matheson Blvd West, Suite 300, Mississauga,
Ontario L5R 3R3, Canada
www.getinge.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>