GETINGE XEN Rinse Versatile Partner Instruction Manual
- July 25, 2024
- GETInGE
Table of Contents
XEN Rinse
Chemistries for the ultimate
peace of mind
Instruction Manual
Instructions for Use
XEN Rinse is a liquid rinse aid for use in automated washer applications,
including washer-disinfectors and cart washers. Rinse is low foaming and does
not interfere with steam or ethylene oxide sterilization.
Rinse aids the sheeting of rinse water over the cleaned instruments, ensuring
the water drains evenly from the surfaces, leaving a spot-free finish and
reducing drying time.
Order no. | Description |
---|---|
6036002101 | Rinse 1 x 5 L. |
6036002201 | Rinse 1 x 5 gal. |
6036002301 | Rinse 1 x 15 gal. |
Directions for Use in Automated Washing Equipment
- Rinse should be automatically dosed into the final rinse cycle. Dosing is 0.03–0.13 oz./gal. (0.25–1.0 ml/L) at temperatures above 122°F (50°C).
- Do not use on polycarbonate. Check polysulphone (PSU, PPSU) and similar materials for compatibility before use.
Caution
- Do not mix with other chemicals.
- Wear correct PPE and follow applicable guidelines. Additional information on SDS.
- Check material compatibility before use.
Dispose of contents and container in accordance with local, regional,
national, and international regulations.
Danger: Causes serious eye damage. Causes skin irritation.
Wear protective gloves/protective clothing/eye protection/face protection.
Wash hands and skin thoroughly after handling. Immediately call a poison
center or doctor. For specific treatment, refer to SDS Section 4: First aid
measures.
First Aid: IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do.
Continue rinsing. IF ON SKIN: Wash with plenty of water.
IF SKIN IRRITATION OCCURS: Get medical advice. Remove contaminated clothing
and wash before reuse.
For ingredient information, visit www.getinge.com
Storage Information
Store in a cool, dry place protected from frost and away from alkalis and
strong oxidizing agents. Store upright in original containers. Optimum storage
temperature 41°F–77°F/5°C–25°C.
Rinse|
---|---
●| Aluminum
●| Anodized Aluminum
●| Titanium
●| Copper
●| Brass
●| Gold
●| Nickel
●| Cobalt Chrome
●| Matte chrome plated
●| Stainless steel
●| Glass
●| Ceramics
●| Rubber
●| Plastic
●| Teflon™/ PTFE
●| Polycarbonate
- = The product is suitable for the material
- = Pay special attention to the guidelines from the instruments/device manufacturer
Teflon™ is a trademark of Chemours.
Getinge is a registered trademark of Getinge AB or its subsidiaries or
affiliates in the United States or other countries.
Copyright 2024 Getinge AB or its subsidiaries or affiliates. • All rights
reserved.
Manufacturer: Quadralene Ltd, Unit 3, St. Modwen Park, Andressey Way, Derby,
DE21 6YH, United Kingdom.
Sales Office, US: 1 Geoffrey Way, Wayne, NJ 07470, USA
Sales Office, Canada: 90 Matheson Blvd West, Suite 300, Mississauga, Ontario
L5R 3R3, Canada
www.getinge.com
MCV00110910 REVA