LINDY 42780 USB 2.0 Active Extension System Pro User Manual
- June 3, 2024
- LINDY
Table of Contents
USB 2.0 Active Extension System Pro
User Manual
42780 USB 2.0 Active Extension System Pro
No. 42780, 42781, 42782, 42783, 42923
Safety Instructions
! WARNING !
Please read the following safety information carefully and always keep this
document with the product.
Failure to follow these precautions can result in serious injuries or death
from electric shock, fire or damage to the product.
Touching the internal components or a damaged cable may cause electric shock,
which may result in death.
This device is a switching type power supply and can work with supply voltages
in the range 100 – 240 VAC For worldwide usability four different AC adapters
are enclosed: Euro type, UK type, US/Japan type and Australia/New Zealand
type. Use the appropriate AC adapter as shown in the picture and ensure it is
firmly secured in place and does not detach by pulling before installing into
a power socket. To reduce risk of fire, electric shocks or damage:
- Do not open the product nor its power supply. There are no user serviceable parts inside.
- Only qualified servicing personnel may carry out any repairs or maintenance.
- Never use damaged cables.
- Do not expose the product to water or places of moisture.
- Do not use this product outdoors it is intended for indoor use only.
- Do not place the product near direct heat sources. Always place it in a well-ventilated place.
- Do not place heavy items on the product or the cables.
- Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket
Instructions for Use of Power Supply
Attach the required adapter to the plug. Push the adapter firmly, twist until the latch secures the adapter. To remove, push the button and twist in the opposite direction.
Introduction
Thank you for purchasing the Lindy USB 2.0 Active Extension System Pro. This
product has been designed to provide trouble free, reliable operation. It
benefits from both a LINDY 2 year warranty and free lifetime technical
support. To ensure correct use, please read this manual carefully and retain
it for future reference.
The USB 2.0 Active Extension System Pro enables you to extend your USB 2.0
devices by up to 60m, with true USB 2.0 High Speed performance of up to 480
Mbps. The USB 2.0 Active Extension System Pro consists of five different units
(each sold separately):
- 8m USB 2.0 Active Extension Pro (No. 42780)
- 8m USB 2.0 Active Extension Pro Hub (No. 42781)
- 12m USB 2.0 Active Extension Pro (No. 42782)
- 12m USB 2.0 Active Extension Pro Hub (No. 42783)
- 30m USB 2.0 Active Extension Pro (No. 42923)
Installation
The Lindy USB 2.0 Active Extension System Pro consists of Active Extension
Cables and Hubs in different lengths (see above). Several cables/hubs from
this system can be connected in any sequence to create a USB 2.0 connection
spanning up to 60m.
If you need to extend more than one port, or if your USB device requires more
than 100mA to operate, then you should use either the Lindy 8m or 12m USB 2.0
Active Extension Pro 4 Port Hub as a final segment, allowing multiple devices
to be connected. Both USB 2.0 Active Extension Pro Hubs include a 5VDC 2.6A
Multi-Country Power Supply.
For added convenience the Active Extension Cables Pro (without Hub) feature a
latching type connector, that allows a secure connection to be made between it
and other cables from the Lindy USB 2.0 Active Extension System Pro.
If you connect your USB device(s) to the final part of the extension using a
standard USB cable, please ensure that the cable used is no longer than 2m.
CE/FCC Statement
CE Certification
LINDY declares that this equipment complies with relevant European CE
requirements.
UKCA Certification
LINDY declares that this equipment complies with relevant UKCA requirements.
FCC Certification
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
You are cautioned that changes or modification not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
The enclosed power supply has passed Safety test requirements, conforming to the US American versions of the international Standard IEC 60950-1 or 60065 or 62368-1.
Hersteller / Manufacturer (EU):
LINDY-Elektronik GmbH
Markircher Str. 20
68229 Mannheim
Germany
Email: info@lindy.com, T: +49 (0)621 470050|
Manufacturer (UK):
LINDY Electronics Ltd
Sadler Forster Way
Stockton-on-Tees, TS17 9JY
England
sales@lindy.co.uk, T: +44 (0)1642 754000
---|---
Tested to comply with FCC standards.
For home and office use.
No. 42780, 42781, 42782, 42783, 42923
7th Edition, February 2022
lindy.com
Documents / Resources
|
LINDY 42780 USB 2.0 Active Extension System
Pro
[pdf] User Manual
42780 USB 2.0 Active Extension System Pro, 42780, USB 2.0 Active Extension
System Pro, Active Extension System Pro, Extension System Pro
---|---
|
LINDY 42780 USB 2.0 Active Extension System
Pro
[pdf] User Manual
42780 USB 2.0 Active Extension System Pro, 42780, USB 2.0 Active Extension
System Pro, 2.0 Active Extension System Pro, Active Extension System Pro,
Extension System Pro
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>