Ford V408 Transit Connect Towbars Car Installation Guide
- July 15, 2024
- Ford
Table of Contents
Ford V408 Transit Connect Towbars Car
Product Information
Specifications
- Product Name: Electric Wiring Kit for Towbars
- Connector Type: 7-pin
- Voltage: 12 Volt
- Standard: ISO 1724
Product Usage Instructions
Tools Required
- Pin-out Tools x2
- 30A Fuse x1
- Various other tools as per the manual
Important Notes
It is crucial to follow the manufacturer’s instructions carefully to
prevent malfunctions and damage to the vehicle’s electrical system.
Step-by-Step Installation Guide
- Disconnect the earth terminal from the vehicle’s battery.
- Refer to the provided wiring diagram and identify the appropriate connections.
- Connect the wiring kit to the vehicle’s electrical system following the specified pin-out.
- Secure all connections properly and ensure proper insulation.
- Test the trailer lights and signals to verify proper functionality.
FAQ
-
Q: Why is it important to disconnect the vehicle’s battery during installation?
A: Disconnecting the battery helps prevent damage to both the trailer module and the vehicle’s control unit for the electrical system during work on the CAN bus connections. -
Q: What should I do if I encounter malfunctions after installation?
A: Check all connections for proper installation and ensure that the wiring is correctly connected according to the provided diagram. If issues persist, consult a professional for assistance.
Fitting instructions
Electric wiring kit for towbars 7-pin / 12 Volt / ISO 1724
IMPORTANT!
This electric kit has to be installed by a professional workshop or a suitably
qualified person. The installation instructions must have been read comp-
letely before the start of any installation. Precautions and guidelines from
the vehicle manufacturer must be observed. Following installation of the
electric kit, the installation instructions must be kept together with the
vehicle’s service documents!
All warranty claims will be forfeited if the electric kit or components
contained therein are used incorrectly or modified. When driving without a
trailer or load carrier, any adapters that have been used must always be
unplugged from the socket. Subject to changes with respect to design,
equipment, colour and error. All of the data and illustrations are without
obligation.
We can assume no warranty or guarantee for technical and electrical
modifications or software updates carried out by the vehicle manufacturer
following the initial commissioning of the electric kit and which, for
example, may lead to malfunctions in the trailer socket or its peripheral
equipment!
The trailer module has not a diagnostic capability!
Tools Required
Tools
ATTENTION!
The vehicle’s cooling capacity may have to be increased when retrofitting a
trailer coupling!
You must observe the manufacturer’s instructions!!
ATTENTION!
GB In order to avoid malfunctions and damage to the vehicle’s electrical
system the earth terminal must be disconnected from the vehicle’s battery
before starting work!
Both the trailer module and the vehicle’s control unit for the electrical
system can be damaged during work on the CAN data bus connections if the
battery is not disconnected!
Please pay attention to the manufacturer’s instructions when disconnecting and
reconnecting the vehicle’s battery!
Step-by-Step Installation Guide
The following light functions for the trailer are not supported by all towing vehicles with DRL circuit:
- Rear lights
- Side lights
- Numberplate lights
The taillights or dimmed headlights must be switched on to activate this function!
Set up trailer operation
Please effect FDRS online coding as follows:
- connect with FordEtis
- dealer registration
- Vehicle : enter VIN
- Vehicle software
- Changes and Upgrades
- Configuration of towbar
If the following control units / functions are installed, they must be configured manually on trailer operation:
- PAM
- SODL
- SODR
- FCDIM
Indicator failure detection and lamp substitution if the trailer indicators
fail
The failure of a single or on both trailer indicators will be shown depending
on the type of vehicle and electric kit installed as follows:
- Increase in the flashing frequency
- Text message in the Display / combi-instrument
- Activated control lamp for light failure
- Audible warning via Buzzer or Voice-Message
If an indicator fails the left or right rear light compensates the faulty indicator by flashing at the correct frequency→( lamp substitution).
Version 1.0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>