WATTECO HYGROTEMP’O 50-70-205 Relative Humidity and Temperature Sensor User Guide

July 15, 2024
WATTECO

WATTECO HYGROTEMP’O 50-70-205 Relative Humidity and Temperature Sensor

Specifications

  • Model: HYGROTEMP’O
  • Models: 50-70-205, 50-70-232, 50-70-231
  • LED Indicator : ON/OFF
  • Material: 50% recycled ABS
  • IP Rating : IP20

Start

WATTECO-HYGROTEMP’O-50-70-205-Relative-Humidity-and-Temperature-Sensor-
FIG-1

WARNING: Provision the device on your LoRaWAN® network with the keys available on a secure platform.

WATTECO-HYGROTEMP’O-50-70-205-Relative-Humidity-and-Temperature-Sensor-
FIG-2 WATTECO-HYGROTEMP’O-50-70-205-Relative-Humidity-and-Temperature-Sensor-
FIG-3

Video: ON – OF

WATTECO-HYGROTEMP’O-50-70-205-Relative-Humidity-and-Temperature-Sensor-
FIG-4

Installation Setting up

WARNING

WATTECO-HYGROTEMP’O-50-70-205-Relative-Humidity-and-Temperature-Sensor-
FIG-5

The installation must be done on a wall at 1.5m from the ground and not in contact with the outside. The collector should be placed away from windows, heat input (sun, radiator, ventilation, air intake).

Remove the cover from the base using a screwdriver for slotted screws

  • The two lugs should be at the top and the clip at the bottom.
  • Place the dowels and screw the base to the wall
  • The two brackets must be at the top and the clip at the bottom.
  • Fit the wall plugs and screw the base to the wall.

Clip the front cover, containing the electronics, onto the base.

Radio propagation

Check the radio coverage with the Netw’O.

WATTECO-HYGROTEMP’O-50-70-205-Relative-Humidity-and-Temperature-Sensor-
FIG-9

For the sensor to communicate correctly, the number of obstacles should be limited to avoid excessive radio attenuation.

Characteristics

WATTECO-HYGROTEMP’O-50-70-205-Relative-Humidity-and-Temperature-Sensor-
FIG-10

SCANNER

WATTECO-HYGROTEMP’O-50-70-205-Relative-Humidity-and-Temperature-Sensor-
FIG-11

https://support.watteco.com/

Watteco represented by JC LE BLEIS, declares that the radio equipment type 50-70-205 / 50-70-232 / 50-70-231 is in conformity with Directive 2014/53/EU (RED) and UKCA. The full text of the EU and UKCA Declaration of Conformity is available at the following web address: https://www.watteco.com/assistance /download-center/

IoT device manufacturer
Thanks for choosing WATTECO devices

Frequently Asked Questions

  • Where can I find the Declaration of Conformity?
    • The full text of the EU and UKCA Declaration of Conformity is available at this link.
  • What should be the distance of the device from the ground during installation?
    • The device should be installed at a height of approximately 1.5m from the ground.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

WATTECO User Manuals

Related Manuals