profi-pumpe ADBLUE Pumps Instruction Manual
- July 15, 2024
- profi-Pumpe
Table of Contents
profi-pumpe ADBLUE Pumps
Specifications
- Product : Pump for AdBlue solution
- Manufacturer : Profi-Pumpe
- Website : www.profi-pumpe.de
Product Information
The pump is designed for handling AdBlue solutions and is manufactured with a
focus on functional security and operational safety.
Product Usage Instructions
Safety Instructions and Warnings
- Please read the user manual before using the pump.
- Pull power plug before any maintenance or servicing.
- Always wear protective gloves when handling the pump.
- Avoid contact with organic acids.
- Protect the pump from rain and moisture.
- Be cautious of electrical voltage when operating the pump.
Introduction
Congratulations on your purchase of our pump. Operational safety is our top
priority.
Operation
The installation must be done by a qualified professional. Ensure electrical
connections are intact. Do not perform cable extensions. Proper cooling is
essential during prolonged operation to prevent damage.
Servicing
Regularly check the electric cable integrity, hose connections, cleanliness of
the pump medium, and deposits inside and outside the pump. Rinse the pump with
clean water before and after each use to prevent crystallization of AdBlue
residues. Empty the pump, rinse with demineralized water, and store dry if not
in use for more than 30 minutes or during frost conditions.
Guarantee Regulations
Statutory warranty applies for manufacturing and material defects. Contact our
service platform for warranty claims.
Recognizing and Repairing Mistakes
| Problem | Possible Causes | Solutions |
|---|---|---|
| No power supply | Check the clamps and safety devices | Ensure proper power |
supply connection
The pump won’t start| Impeller jammed or Motor malfunction| Check for damage,
clogging, or contact dealer for motor
issues
The suction of the pump is not working| Leak in suction lines or connections|
Check for leakages, fill suction hose, ensure proper placement
for air bubbles escape
PRODUCT OVERVIEW
- With our AdBlue® pump, you can conveniently and easily fill the auxiliary tank with AdBlue® or anotherurea-water solution.
- You can also use our AdBlue® pump to pump water, windshield wiper water, urea or organic acids.
*AdBlue, a registered trademark / eingetragenes Warenzeichen of / vom Verband der Automobilindustrie e. V.
Technical changes, misprints and mistakes reserved! Newest information about
our products can be found online. Technische Änderungen, Druckfehler und
Irrtümer vorbehalten! Aktuelle Informationen zu unseren Produkten finden Sie
auf: http://www.profi-pumpe.de
SAFETY INSTRUCTION AND WARNINGS
- Please read the user manual before using the pump
- Warning sign
- Warning of electrical voltage
- Organic acids
- Pull power plug
- Protective gloves
- Protect from rain and moisture
INTRODUCTION
We would like to congratulate you on the purchase of our pump. We appreciate your trust. That‘s why functional security and operational safety stands on first place for us.To prevent damage to persons or property, you should read this user manual carefully. Please observe all safety precautions and instructions for proper use of the pump. Failure to follow the instructions and safety precautions can result in injury or property damage. Please keep this manual with the instructions and safety instructions carefully in order to at any time you can restore them. Please always download the latest version of the user manual of www.profi-pumpe under „downloads“. This shall always prevail.
IN GENERAL
The pumps are developed according to the newest stand of technology, manufactured with much care and go under strict intensive controls – each pump is checked individually – rests of the check fluid could be still inside the pump oron the package. The counter (if available) shows more than 0,0 Liter because of that (usually 5-12L). The pumps were optimized by us in particular for their special demands. Make sure after unpacking the pump that the data given on the type label agree with the operating conditions. In the case of doubt the pump is not to be used. Transport damages are immediately to be reported to the package distributor and to us in written form. By transport with DHL please contact your local DHL office within 7 days.
RANGES OF APPLICATION
These pumps are made for pumping AdBlue®* ONLY!
IMPORTANT!
They are not suitable for pumping ignitable liquids like gasoline, or
kerosene, or for pumping at places where the danger of an explosion exists.
When using the pump, make sure there are no open flames, lighters, matches,
cigarettes or similar things present around you. When operating suitable
protective gloves must be worn. These pumps are made for pumping clean
AdBlue®* ONLY! The pumped liquid should not contain abrasive components.
Abrasive components reduce pump life.
OPERATION
The installation must be performed by a qualified professional. Please, check each time before using, the electrical connections and the cables are not damaged. Also, it is NOT recommended to perform, for example, a cable extension. It is not certain whether this modification is technically correct, so this warranty is void. It must be ensured that the pump is sufficiently cooled during prolonged operation. AdBlue® pumps are electrical products, which have to be protected against outer influences, f.e. caused by weather. Only use the pump in well-ventilated rooms and areas with enough fresh air. The floor, on which the pump may be used, should be flat. Please keep enough space from walls. Place the AdBlue®-tank as near to the pump as possible. The specified suction lift is the maximum suction at optimal conditions. The suction line to the pump has to be steadily increasing. The pump and the suction pipe must be filled with AdBlue®* before turning „on“ the pump. Do not reduce the cross area of suction and discharge lines. Connect suction and discharge lines to the pump by means of reinforced metal hose. For stationary use please place the pump on rubber pads to reduce vibration transmission to and from the pump and thereby prevent damage caused. The suction and discharge line should be connected to to the pump in souch way, that no mechanical stress on the connections occure. For example, Fix lines by pipe clamps with rubber insert on the wall.
IMPORTANT!
AdBlue®* may not be mixed directly with diesel in any case, because the
chemical is injected from a separate tank into the exhaust system. Where
ammonia is released, which reacts with the nitrogen oxides in the catalyst and
converts to nitrogen and water vapor AdBlue® consists of 32.5% urea and 67.5
of demineralized water. AdBlue is odorless and non-toxic, not flammable,
explosive or dangerous for the environment.
SERVICING
Under normal pumping conditions the pump requires no servicing. But it is
important to keep the suctions and delivery sections perfectly clean and free
from all clogging. The operating conditions and mode of operation must be
designed so that the AdBlue solution can not dry out and crystallize out in
the pump. Before and after each pumping operation, the pump must be rinsed
with clean water so that possible AdBlue residues (salts) do not crystallize
and damage the pump.
The following controls should be carried out regularly:
- Intactness of the electric cable
- That the connection hoses are not bent or broken
- Cleanness of the pump medium
- Deposits in and on the pump
- In addition, the pump should be emptied, dripped with demineralised water and stored dry, in case of frost or during standstill periods longer than 30 minutes.
GUARANTEE REGULATIONS
For all manufacturing and material defects, the statutory warranty applies. In these cases we take the replacement or repair of the pump. Shipping costs shall not be borne by our company, except as required by law. Please report the warranty on our service platform http://www.profi-pumpe.de/service.php. We will inform you how to proceed with case-related. Please mark returns sufficient postage. Unfortunately not prepaid returns can not be accepted because they are filtered out before destination. We provide our service in Germany.
The warranty does not cover:
- Material wear (sealing rings, impeller wheels, impeller chambers)
- Unjustified interventions or changes in the pump
- Damages by selffault
- Improper servicing and improper use
- DRY RUNNIG (Also partially!) of the pump
Moreover, we give no damage compensation for secondary damages!
SECURITY TIPS
- Obey absolutely valid regulations on the electrical security
- When operating suitable protective gloves must be worn.
- Never run pump dry
- Never run pump against pressure
- Pumping inflammable, as well as all other aggressive liquids is prohibited
- Never pump liquid food products
- Before usage, check on the tightness of the hose clamps
- Pay attention to the max. liquid temperature of 35°C
- Never pull the pump on the electrical cable or pressure hose
- Disconnect the plug immediately from the power grid when the line has been damaged or severed
- Switch off pump immediately after usage
- Don’t move the pump in any way, while it’s running
- During longer unused times, clean the pump, wash it out with water, dry and store it at room temperature
- ALWAYS supervise and watch the pump, while using
- The electrical connections are always to be carried out by an authorised professional
- The material compatibility between pump and fluid must be checked by the customer. If in doubt, do not operate the pump. The pump is operated on the customer‘s own responsibility and at the customer‘s own risk.
- The pump may be used by children aged 8 years and above as well as persons with reduced physical, sensory or mental abilities or those who lack skills, experience and knowledge only if they are supervised. These aforementioned persons should only use the appliance while adhering to safe instructions and resulting dangers.
- Cleaning and maintenance must not be carried out by children without supervision.
THE MANUFACTURER EXPLAINS:
- To take over no responsibility in the case of accidents or damages on the basis of carelessness or disregard to the instructions in this book.
- To reject every responsibility for the damages which originate from the improper use of the pump.
RECOGNISING AND REPAIRING OF MISTAKES
TECHNICAL DATA
All products listet in this manual are Made in PRC / Alle Produkte in dieser Bedienungsanleitung sind Made in VRC.
AdBlue, a registered trademark
NOTES ON PRODUCT LIABILITY
We point out, that we are only liable for damages under the Product Liability
Act, which are caused by our units if no changes were made to the equipment.
If repairs are carried out by our authorized service, we are only liable if
original spare parts and accessories were used.
SPARE PARTS
The spare parts will be available for purchase from AMUR S.à.r.l. at www
.profi-pumpe.de.
NOTES ON DISPOSAL
Electro devices of our company, labeled with the symbol of the crossed trash
bin, are not permitted to be disposed of in your household garbage. We are
registered at the German registration department EAR under the WEEE-No.
DE79535656. This symbol means, that you’re not allowed to treat this product
as a regular household waste item – it has to be disposed at a recycling
collection point of electrical devices. This is the best way to save and
protect our earth.
THANK YOU FOR YOUR SUPPORT!
EU DECLARATION OF CONFORMITY
The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies
that the product named overleaf, namely AdBlue® 12V-Pumpe, AdBlue® 24V-Pumpe,
AdBlue® 230V-Pumpe as placed on the market, complies with the relevant
provisions listed below, the relevant EU harmonized directives and the EU
standard for safety. This declaration of conformity applies insofar as no
modifications are made to the product. The sole responsibility for issuing
this declaration of conformity lies with the manufacturer.
The sole authorized person to keep the technical documents:
- Amur S.à r.l. – 36, Rue de la Gare – L-5540 Remich
- Low Voltage Directive (2006/95/EC)
- EC Electromagnetic compatibility directive (2014/30/EU)
The following harmonized standards:
- EN 55014-1:2017; EN 61000-6-3:2007+A1:2011; EN 61000-3-2:2014
- EN 61000-3-3:2013; EN 55014-2:2015; EN 61000-6-1:2007
- RoHS: 2011/65/EU
Signed for and on behalf of:
- Amur S.à r.l.
- Remich, 19.03.2024
i.V. Dipl. Phys. Peter Neumüller
Technical Manager
Imprint
- Amur S.à r.l.
- www.amur.lu
- Email : info@amur.lu
- Tel.: +49 611 9458777-0
- Fax : +49 611 9458777-11
FAQ
Q: How often should I rinse the pump with clean water?
A: The pump should be rinsed with clean water before and after each pumping
operation to prevent the crystallization of AdBlue residues.
Q: Can I perform a cable extension on the pump?
A: It is NOT recommended to perform a cable extension as it may void the
warranty and compromise technical correctness.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>