STKR 00133 Ultrasonic Adjustable Garage Parking Sensor Instructions

STKR 00133 Ultrasonic Adjustable Garage Parking Sensor

PRODUCT OVERVIEW

INTRODUCTION

• Let the Garage Parking Sensor help you consistently guide your car to a safe stopping distance. The Garage Parking Sensor is low maintenance and easy to install.
• The Garage Parking Sensor consists of a sensor module and a display module. The sensor module transmits harmless ultrasonic pulses that are reflected by an incoming object.
• When a vehicle is detected, more pulses are transmit­ted to track the incoming vehicle speed and distance. The display unit, mounted where the driver can easily see it, uses a bright GREEN light to indicate that the vehicle has been detected. A bright YELLOW light indicates when you are close to your stopping distance. When the vehicle reaches the desired stopping distance, a RED light will illuminate and stay on.

Power via 4 AA batteries OR optional USB port

1.  The USB port is NOT a charging port. It is a power port only.
2. USB charger and wire NOT included.
   The USB Power port is an optional way to power your parking sensor. Use your own mini USB “cell phone” style USB power cable and plug as an alternate power source to alkaline batteries.

Installing Batteries

This unit requires 4 AA batteries.

1. Remove the battery compartment cover on the back of the display unit.
2. Insert 4 new ‘AN alkaline batteries (not included) according to polarity diagram inside battery compartment.
3. Replace cover.
   When it is time to replace the batteries, the display module will flash a yellow light every 6 seconds.

MOUNTING THE GARAGE PARKING SENSOR

ADHESIVE STRIPS & VELCRO MOUNTING:
The large display unit will be mounted within the drivers line of sight. The small sensor will be mounted directly below the display. It should be level with the center of the car bumper.

1. Place the double-sided tape onto the back of the small sensor module.
2. Mount the small sensor at bumper height of the vehicle that is intended for use with the Garage Parking Sensor. Be sure the area of the wall, or mounting surface, is clean and free of any dust and debris. (See associated Images marked with an “A”)

Mount the display unit with the included velcro, or a screw hole is provided if you choose to utilize your own I screw to mount the unit.

3. For velcro install, peel off one side of the protective backing on the adhesive Velcro, and stick it to the back 1 of the display unit.
4. Peel Velcro off and the mount other it side to of the the wall, or protective mounting backing surface, on the in I front of the car at eye level for the driver. Be sure the free surface of you any are dust or mounting debris. the (See display to associated is clean Images and 1 marked with an “B”)

OPERATION

The STKR® Garage Parking Sensor should now be properly installed and ready for use.

SETTING THE DESIRED STOPPING DISTANCE

The STKR” Garage Parking Sensor can be adjusted to set the stop zone from 1 foot away from the sensor up to 4 feet away from the sensor. The default distance is set to turn the red light on at 1 foot from the sensor. If you would like a different stopping distance follow the steps below. You may change the distance as many times as you like.

1. Park your car exactly where you want it (Ignoring the default settings on the parking sensor). It may be wise to have a 2nd person guide you to the desired location to ensure you don’t hit anything with your car.

2. Once your car is parked exactly where you would like the red light to turn on, simply press the”Set Distance” button firmly. Be sure yourself and/or objects are not blocking the sensor unit. The red, yellow, and green LEDs will illuminate. Release the button (Note: you can reset the parking distance anytime by repeating this step).

3. Your STKR” Garage Parking Sensor is now set to illuminate the red light at that distance every time your vehicle approaches the sensor.

4. Test your new setting by slowly driving your car into your garage. If your reaction times are slow to stop the car when the red light illuminates, you may want to change the location when the red light illuminates to allow for the delay.

   • NOTE:
     Garage Parking Sensor stop distances can vary due to vehicle type, temperature, and weather. It is important to check your reaction time and leave sufficient stopping distance for these variations. Always test the desired stop distance when parking a new vehicle and adjust mounting location or stopping distance if necessary.

   • CAUTION!: The Garage Parking Sensor was  designed for slow speed parking. For rapid entrancespeeds, the display module may not accurately reflect distance, so approach slowly! Remember, this is only a parking aid. It does not stop your car. That is your job! Due to variations in driver skill and reaction time we make no guarantees with this product. Use at your own risk and approach with caution every time. When in doubt, stop the car and check the conditions and location of the car.
     The Garage Parking Sensor is not suitable for use in wet conditions.

   • IMPORTANT: Remove batteries before storing the Garage Parking Sensor for extended periods. Batteries corrode over time and may cause permanent damage to the unit. Different types of batteries or new and used batteries should not be mixed. Exhausted batteries should be removed from the unit and disposed of properly.

BATTERY INDICATION

• Low Battery Alert (yellow flashing LED): flash every 6 seconds
  • Minimum Stop Range:   -6 inches
  • Maximum Stop Range:   -6 feet
• The green light illuminates as soon as it detects your vehicle within 8 feet of the sensor.
• The yellow light illuminates 1.5 feet from the predetermined stop zone.

WARRANTY

STKR” products are guaranteed: 1 year warranty against manufacture and material defects under normal use. In order to claim warranty, the original receipt must be presented. Claims under warranty will be reparied or replaced. Call STKR® at 1-704-508-1031. This warranty gives you specific legal rights. Rights vary from state to state.

• Do not mix old and new batteries;
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd, Ni-MH, etc) batteries.
• Dispose of batteries properly.

ABOUT COMPANY

• www.STKRconcepts.com
• Questions? Call 704-508-1031
• Troutman, NC 28166

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>