AENO ABS0001S Smart Body Scales User Guide
- July 14, 2024
- AENO
Table of Contents
AENO ABS0001S Smart Body Scales
Product Information
Specifications
- Model: AENOTM ABS0001S
- Weight Display Scale
- Requires 3 AAA batteries
- Version: 1.0.2
- Release Date: 03.04.2024
Product Usage Instructions
Active Pairing with the AENO App
To pair the device with the AENO app, make sure Bluetooth is enabled on
your smartphone and it is within range of the scale. Follow the app
instructions for pairing.
Weight Display Scale
The scale is designed to accurately measure the user’s weight. Step on the
scale with bare feet for accurate readings.
Selected Weight Measurement Unit
You can select your preferred weight measurement unit through the AENO app.
Make sure to choose the unit that you are most comfortable with.
Battery Installation
Insert three charged AAA batteries into the compartment of the device,
ensuring correct polarity for proper functioning.
Troubleshooting
If you encounter any issues with connecting the device to the app, ensure
Bluetooth is enabled on your smartphone and it is in close proximity to the
scale.
FAQ
-
Q: How can I contact support for my AENOTM device?
A: You can reach out to support via email at support@aeno.com or chat with them on aeno.com /service-and-warranty for assistance with any problems. -
Q: What should I do if my device does not connect to the app?
A: Make sure Bluetooth is enabled on your smartphone and it is near the scale. Also, check the battery levels and replace them if needed.
Quick Start Guide
Smart Body Scales BSIS
(Model: ABSOO01S)
ENG AENO™ ABS0001S Smart Body Scales are designed to determine the user’s weight.
Technical Specifications
- Power supply: AAA batteries (3 pcs.), 4.5 V, 0.2 W (max.). BT 5.0
- Operating frequency: 2,400–2,480 MHz
- Transmitter power: +4 dBm / 2.5 mW
- Measuring range: 5–180 kg
- Weight increment: 0.1 kg
- Measurement error: ±0.3 kg (for 0–50 kg); ±0.43 kg (for 50–100 kg); ±0.5 kg (for more than 100 kg)
- Units of measurement: kg, lb, st:lb
- Display: VA; 63×27 mm. Automatic activation/deactivation
- Indication of the BT connection to the app
- Control: manual, remote (AENO app)
- Color: White
- Casing material: HIPS plastic, tempered glass with ITO coating
- Dimensions (L×W×H): 280×280×27.5 mm
- Weight: 1.6 kg
- Operating conditions: temperature +5…+40 °C, RH 40–85 % (non-condensing)
- Storage conditions: temperature −20…+60 °C, RH up to 90 % (non-condensing)
Scope of Supply
Body Scales ABS0001S, AAA batteries (3 pcs.), Quick Start Guide.
Restrictions and Warnings
Handle the glass surface of the scales with care: avoid damaging, cracking and
chipping the surface as broken glass can cause injury. Supervise the use of
the device by children and persons with physical and mental disabilities. Do
not allow children to play with the device. Place the scales on a hard, flat,
horizontal surface to avoid inaccurate measurements. Do not place the scales
on carpets or any other soft surface. Do not load the device beyond the
maximum value of the measuring range. If the device is not used for an
extended period of time, remove the batteries and store them out of the reach
of children and animals. Do not use chemical and harsh detergents, abrasive
pastes, products containing acids and solvents, or metal sponges to clean the
device.
ATTENTION! Do not expose the device to water or other liquids. Do not
immerse the device in water. Do not wash the device or any part of it under
running water or in a dishwasher.
Device Elements (see fig. A, B)
1 – display; 2 – battery compartment; 3 – “UNIT” button.
Device Indicators
Preparing Device for Use
Unpack the device and clean it (see “Cleaning and Maintenance”). Open the
battery compartment (2) cover and insert the batteries into the compartment,
observing the correct polarity. Press the “UNIT” button (3) to select the unit
of weight measurement. After each press, the display (1) will show the current
unit of measurement: “kg” – kilogram, “lb” – pound, “st:lb” – stone. Close the
cover of the compartment. Place the device on a hard, horizontal surface.
Note. The selected settings are saved for current use and for the next time
the device is turned on. To reset the settings, press and hold the “UNIT”
button for 5 seconds. The display will show the code “CLr”. Also, the settings
are automatically reset when the batteries are removed.
Operation of the Device
Stand on the surface of the device. The scales will turn on automatically, and
the display will show your weight in the selected unit of measurement. The
scales will turn off automatically within 15 seconds after the measurement is
complete.
ATTENTION! Information shown by the scales cannot be considered medical information.
Cleaning and Maintenance
Note. Remove the batteries before cleaning the device.
Wipe the device with a soft cloth dampened with clean water and then wipe dry.
If the scales are very dirty, wipe them with a soft cloth dampened with a mild
soap solution. Then wipe with a soft cloth dampened with clean water and wipe
dry.
Connecting to AENO Mobile App
Download the AENO mobile app from Google Play or App Store and register a new
account (or log in to an existing one).
-
Stand on the scales to turn them on. Place your smartphone as close to the device as possible.
-
On the home screen of the app, tap “+” and then tap “Add Device”.
Note. If you receive system prompts to turn on any features on your smartphone, follow the prompts. -
The device will be found automatically, and its image will appear in the “Autosearch” section. Tap the “Add” button.
-
Wait until the message indicating that the device has been successfully added appears.
Tap “Done”.
Additional information about the user is available in the app: body fat
percentage, muscle and bone mass, body water level, body mass index, etc. For
more information on the features available in the app, refer to the complete
user manual at aeno.com/documents.
Troubleshooting
- The device does not turn on. Possible cause: batteries are missing or discharged; polarity was not observed when inserting the batteries. Solution: insert charged batteries into the compartment, observing the polarity.
- The device does not connect to the app. Possible cause: BT is not enabled on the smartphone; the smartphone is too far away from the scales; scales settings failure. Solution: enable BT on your smartphone; place the smartphone no more than 5 m away from the scales; reset the scales to factory settings.
Error Codes Shown on Display
“Lo” – low power supply charge level; “Err” – maximum allowable weight
exceeded; “C” – weighing failure.
ATTENTION! If none of the suggested methods have solved the problem,
contact your supplier or an authorized service centre. Do not disassemble the
device or attempt to repair it yourself.
If you have any questions or difficulties in using your AENO™ device, please e-mail support at support@aeno.com or chat with us at aeno.com/service-and-warranty. The specialists will help you solve the problem, and you will not have to waste time and effort visiting the store.
ASBISC reserves the right to modify the device and to make changes and
additions to this document without prior notice to users.
The warranty period and service life is 2 years from the date of retail sale
of the device.
Manufacturer: ASBISC Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101,
Limassol, Cyprus. Made in China. All trademarks and brands mentioned herein
are the property of their respective owners. The date of manufacture is
indicated on the package.
Up-to-date information and a detailed description of the device, as well as
connection instructions, certificates, information about companies accepting
quality claims and warranties is available at
aeno.com/documents.
SIMPLIFIED DECLARATION OF CONFORMITY
Hereby, ASBISC declares that the device is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at
the following internet address:
aeno.com/userfiles/files/Certificates/CE/BS1S.pdf
Recycling information.
These symbols indicate that you must follow the Waste Electrical and
Electronic Equipment (WEEE) and Waste Battery and Battery Regulations when
disposing of the device, its batteries and accumulators, and its electrical
and electronic accessories. According to the rules, this equipment must be
disposed of separately at the end of its service life. Do not dispose of the
device, its batteries and accumulators, or its electrical and electronic
accessories together with unsorted municipal waste, as this will harm the
environment. To dispose of this equipment, it must be returned to the point of
sale or turned in to a local recycling facility. You should contact your local
household waste disposal service for details.
- Device name:
- Serial number:
- Purchase date:
- Seller stamp:
Download the full warranty card on aeno.com
Points de collecte sur www.quefairedemesdechets.fr
Please contact our online support team if you have any questions or issues
with your AENO device.
This is a better option than visiting the store and will save you time and
effort
Get support
References
- Home appliances AENO - Smart home appliances on the official website of the manufacturer AENO in Europe
- Documents | AENO in Europe
- Service and Warranty | AENO in Europe
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>