DOSS Extreme Boom S Portable Waterproof Speaker User Guide
- July 13, 2024
- Doss
Table of Contents
- Packing content
- Specifications
- Important notes before using
- Buttons and control
- LED indication
- Connections
- Bluetooth mode
- TWS (True Wireless Stereo) mode
- Use your speaker with Echo Dot
- Safety instructions
- Notice
- FCC Statement
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
DOSS Extreme Boom S Portable Waterproof Speaker User Guide
Packing content
- 1 x Extreme Boom S
- 1 x USB-C charging cable
- 1 x Strap
- 1 x Quick start guide
Specifications
Bluetooth range: up to 20m/66ft
Output power: 60W
DC power input: 5V = 2A —
USB output: 5V 2A
Capacity: 9000mAh
Charge time: 5hrs
Playtime: 25hrs (at 50% volume-Hotel California)
Net weight: 2.08Kg (4.6lbs)
Dimension: 323120184 mm (12.74.87.3inches)
TF card audio format: MP3/ WMA/ FLAC (Max capacity 256G)
Important notes before using
- To prolong the lifetime of the battery, fully charge it before first time using.
- The battery is at low level when the leftmost LED blinks.
- The speaker will auto power off after 15 minutes without audio input.
- To cancel the auto power off feature, press and hold M for 2s simultaneously.
- The USB out is only for charging your device.
- Restore factory setting by press and hold the for 2s simultaneously.
- Press any button to check the battery level while not charging.
- When all buttons can’t be controlled, try to poke the Aux port with a paper clip.
- If you need any assistance while using this speaker, please feel free to contact customer service at support@dossav.com.
Buttons and control
Buttons | Function | How to control |
---|---|---|
Turn on/ off | Press and hold | |
BASS | Extra bass on/ off | Press |
Volume down | Press | |
Previous track | Press and hold | |
Play/ pause | Press | |
Reconnected to the last device | Press | |
Disconnect device(s) | Press and hold | |
Volume up | Press | |
Next track | Press and hold | |
Switch audio input modes | Press | |
Enter/exit TWS mode | Press and hold | |
Change light modes | Press |
LED indication
| | battery level 25%
---|---|---
| battery level 50%
| battery level 75%
| battery level 100%
| Solid white| Extra bass on
Off| Extra bass off
| Flashing blue| Bluetooth pairing
Solid blue| Bluetooth paired
Solid red| Aux in mode
Solid green| TF card mode
Rapidly flashing green| Max volume
| Solid white| TWS mode
Connections
-
Max ou put 5V == 2A
-
AUX in (not supplied) -
TF card (not supplied)
Bluetooth mode
- Enable the Bluetooth feature on your device.
- Select Extreme Boom S on the Bluetooth list.
- Once paired, you can see the status “connected” on your device
- Press to re-enter Bluetooth pairing if your device can’t find Extreme Boom S in 10 secs.
TWS (True Wireless Stereo) mode
- Press and hold on both Extreme Boom S to enter into TWS pairing.
- Once paired, the LED of the primary speaker turns solid white, while the secondary speaker flashes in white.
- Find “Extreme Boom S” on your Bluetooth device and connect it.
Use your speaker with Echo Dot
You can connect the Dot with the speaker by Bluetooth.
Please follow the steps to set up via Bluetooth:
- Download the Alexa app and follow the standard setup procedure to get the dot connected to your home Wi-Fi network.
- Switch the Extreme Boom S to Bluetooth mode, you can press and hold the Bluetooth button to keep it in pairing status..
- Run the Alexa App, tap Menu, and then tap Settings.
- Tap the Echo Dot in your list of Alexei devices, then tap Bluetooth.
- The Extreme Boom S should appear in the list of Bluetooth devices. If not, please long press the Bluetooth button and try it again.
- Once listed, tap on the speaker to complete the pairing process.
- To remove the device, return to Bluetooth > tap the name of speaker > tap “Forget Device”
Note: Voice command will not be able to turn on/off the speaker if you connect to it via Bluetooth.
Safety instructions
Avoid dropping or hitting the speaker.
Avoid exposing to extreme temperature.
Avoid using the speaker near a microwave.
Never disassemble or repair the speaker.
Never use any corrosive cleanser/oil to clean.
Never leave the speaker in a car parked in the sun.
Never attempt to charge the speaker while it is wet.
Notice
This product complies with the radio interference requirements of the CE European Community.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
For updates, promotions, and experience sharing, join our customer community.
@dossav/@dossfans
@dossdirect
www.dossaudio.com
1-833-275-3677 Mon-Fri 9AM-5PM PT (USA)
Customer Service Email:
US: support@dossav.com
UK: support_uk@dossav.com
FR: support_fr@dossav.com
IT: support_it@dossav.com
CA: support_ca@dossav.com
DE: support_de@dossav.com
ES: support_es@dossav.com
JP: support_jp@dossav.com
UK / REPEVATOST CONSULTING LTD
Office 101 32 Threadneedle Street, London,
United Kingdom, EC2R 8AY
contact@evatost.com
OST_UK _20220119000010
We simply act as UK representative for cross-border sellers, and are not
manufacturers/importers/distributors for the product, nor involved in the
manufacture/import/sale of the product. Therefore, we are
not responsible for any after-sales services related to the product. In case
of any product quality or
infringement issues, the manufacturer/importer/seller shall be solely held
responsible.
EU / REP
eVatmaster Consulting GmbH
Bettinastr. 30
60325 Frankfurt am Main,Germany
contact@evatmaster.com
OST EU 20220119000015
We simply act as EU representative for cross-border sellers, and are not
manufacturers/importers/distributors for the product, nor involved in the
manufacture/import/sale of the product. Therefore, we are not responsible for
any after-sales services related to the product. In case of any product
quality or infringement issues, the manufacturer/importer/seller shall be
solely held responsible.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>