DOSS E-go III Portable Outdoor Speaker User Guide

: July 13, 2024
: Doss

Table of Contents

DOSS E-go III Portable Outdoor Speaker
Specifications
Product Usage Instructions
Packing content
Buttons and control
LED indications
Bluetooth mode
TWS (True Wireless Stereo) mode
Use your speaker with Echo Dot
Safety instructions
FCC Statement
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DOSS E-go III Portable Outdoor Speaker

Specifications

Output power: 8W
Input : DC 5V 1A
Battery : 3.7V 1400mAh
Charging time : ~ 2.5hrs
Playback time : up to 22hrs (75% volume @ pink noise)
Bluetooth range : up to 20m/66ft
Net weight : 255g/0.56lbs
Unit dimensions : 9.75.19.7cm/3.82.03.8 inches
TF card audio format : MP3/WAV (Max capacity 128GB)

Product Usage Instructions

Important Notes Before Using:

To prolong the life of the battery, fully charge the speaker before first use.
TWS feature is only available under Bluetooth mode.
Press the volume buttons simultaneously to check the version ID.
The speaker will auto-power off after 15 minutes without audio input.

Buttons and Controls:

Turn on/off: Press and hold for 2 seconds
Reject a call: Press and hold for 3 seconds
Answer/end a call: Press once
Enter/exit TWS pairing: Press twice
Next track: Press and hold for 2 seconds
Volume up/down: Press once
Disconnect Bluetooth: Press and hold for 2 seconds
Check version ID: Press and hold for 3 seconds

Bluetooth Mode:

Enable the Bluetooth feature on your device.
Find E-go III on the Bluetooth device and connect it.

TWS (True Wireless Stereo) Mode:

Press twice on both E-go III to enter into TWS pairing.
Once paired, the LED of the primary speaker turns solid blue, while the second speaker turns flashing blue.
Find E-go III on your Bluetooth device and connect it.

Use Your Speaker with Echo Dot:

Note : Voice command will not be able to turn on/off the speaker, it can only translate the sound signal.

Safety Instructions:

Avoid dropping or hitting the speaker.
Avoid exposing to extreme temperatures.
Avoid using the speaker near a microwave.
Never disassemble or repair the speaker.
Never use any corrosive cleanser/oil to clean.
Never leave the speaker in a car parked in the sun.
Never attempt to charge the speaker while it is wet.

For updates, promotions, and experience sharing, join our customer community.

Lf@dossav/@dossfans
does direct
www.dossaudio.com
C 1-833-275-3677 Mon-Fri 9AM-5PMPT (USA)

Customer Service Email:

EVATOST CONSULTING LTD
Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR contact@evatmaster.com

eVatmaster Consulting GmbH

Bettinastr. 30
60325 Frankfurt am Main, Germany contact@evatmaster.com

Packing content

1 x E-go III
1 x USB-C charging cable
1 x User manual

Important notes before using

To prolong the lifetime of the battery, fully charge the speaker before using it for the first time.
TWS feature is only available under Bluetooth mode.
Press the volume button “+ – ” simultaneously to check the version ID.
The speaker will auto-power off after 15 minutes without audio input.
If you need any assistance while using this speaker, please feel free to contact customer service at support@dossav.com.

Buttons and control

$DOSS E-go-III-Portable-Outdoor-Speaker-FIG- $1$$

LED indications

$DOSS E-go-III-Portable-Outdoor-Speaker-FIG- $2$$

Bluetooth mode

Enable the Bluetooth feature on your device.
Find “E-go III” on the Bluetooth device and connect it

TWS (True Wireless Stereo) mode

Press twice on both E-go III to enter into TWS pairing.
Once paired, the LED of the primary speaker turns solid blue, while the second speaker turns flashing blue.
Find “E-go III” on your Bluetooth device and connect it.

Use your speaker with Echo Dot

You can connect the Dot with the speaker by Bluetooth.

Please follow the steps to set up via Bluetooth:

Download the Alexa app and follow the steps to set up the procedure to get the Dot connected to your home Wi-Fi network.
Switch the E-go III to Bluetooth mode, you can press the Play/pause button to re-enter Bluetooth pairing.
Run the Alexa app, tap Menu, and then tap Settings.
Tap the Echo Dot in your list of Alexa devices, then tap Bluetooth.
The E-go III Pro should appear in the list of Bluetooth devices. If not, please press the power button and try again.
Once listed, tap on the speaker to complete the pairing process.
To remove the device, return to Bluetooth＞tap the name of the speaker＞ tap “Forget Device”

Note:
Voice command will not be able to turn on/off the speaker, it can only translate the sound signal.

Safety instructions

Avoid dropping or hitting the speaker.
Avoid exposure to extreme temperatures.
Avoid using the speaker near a microwave.
Never disassemble or repair the speaker.
Never use any corrosive cleanser/oil to clean.
Never leave the speaker in a car parked in the sun.
Never attempt to charge the speaker while it is wet.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ISED Statement
This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment should be installed and operated with a minumum distance of 20 cm between the radiator and vour body.

FAQ

Q: How do I check the battery level of the speaker?
A: Press the volume buttons simultaneously to check the version ID, which includes battery information.

Q: How do I pair two speakers for True Wireless Stereo mode?
A: Press twice on both E-go III speakers to enter into TWS pairing mode, then connect them via your Bluetooth device.

Q: Can I use the speaker with devices other than smartphones?
A: Yes, you can use the speaker with various devices that support Bluetooth connectivity.