StarTech com OR41GI-NETWORK-CARD 4 Port RJ45 Gigabit OCP 3.0 Server Network Card User Guide
- July 13, 2024
- StarTech com
Table of Contents
- StarTech com OR41GI-NETWORK-CARD 4 Port RJ45 Gigabit OCP 3.0 Server
- Product Usage Instructions
- Driver Installation
- Product Diagram
- Package Contents
- Requirements
- Installation
- Download the Driver
- Install the Driver
- Regulatory Compliance
- Verify the Driver Installation
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
StarTech com OR41GI-NETWORK-CARD 4 Port RJ45 Gigabit OCP 3.0 Server
Network Card
Specifications:
- Product Name: 4-Port RJ45 Gigabit OCP 3.0 Server Network Card
- Model: OR41GI-NETWORK-CARD
- Ports: 4 x RJ45 Ports
- Connector: 4C+ Connector (OCP NIC 3.0)
Product Usage Instructions
Installation:
- Unplug the Power Cable from the back of the Host Server and disconnect any Peripheral Devices.
- Remove the Cover from the Server Case following the Host Server documentation.
- Locate an open OCP NIC 3.0 Slot and remove the corresponding Slot Cover Plate.
- Gently insert the Server Network Card into the OCP NIC 3.0 Slot and turn the Locking Screw to attach it to the back of the Server Case/Chassis.
- Return the Cover onto the Host Server.
- Connect one or more Network Cables to the RJ45 Ports on the Server Network Card.
- Reconnect all disconnected Peripheral Devices.
- Reconnect the Power Cable to the back of the Host Server.
- Turn on the Host Server and Peripheral Devices.
Driver Installation
- Windows:
- Extract the downloaded Driver Package and follow the on-screen instructions.
- Refer to the Intel_Windows_DIG file for further Installation Instructions.
- Linux:
- Extract the contents of the Driver Package.
- Follow the instructions in the accompanying README file for further Installation Instructions.
Verify Driver Installation:
- Windows:
1. Navigate to Device Manager and check under Network Adapters for Intel(R) I350 Gigabit Network Connection.
2. Confirm proper installation by checking Properties.
- Linux:
1. Check the kernel version using the uname -r command.
2. Type sudo dmesg | grep Intel in Terminal to verify Intel Driver Integration.
Regulatory Compliance:
This product complies with FCC – Part 15 and Industry Canada Statement
regulations.
Warranty Information:
The product is covered by a two-year warranty. For detailed terms and
conditions, visit www.startech.com/warranty.
StarTech.com Ltd.
45 Artisans Crescent London, Ontario N5V 5E9 Canada
Product Diagram
OR41GI-NETWORK-CARD
*Product may vary from image
Package Contents
- OCP NIC 3.0 Network Card x 1
- Quick-Start Guide x 1
Requirements
For the latest requirements, please visit www.startech.com/OR41GI-NETWORK- CARD
- Host server with an available OCP NIC 3.0 slot
Installation
Install the Server Network Card
WARNING!
Static Electricity can severely damage Network Cards. Ensure that you are
adequately grounded before you open your Host Server Case or touch the Server
Network Card. You should wear an Anti-Static Strap or use an Anti-Static Mat
when installing any computer component. If an Anti-Static Strap isn’t
available, discharge any built-up static electricity by touching a large
Grounded Metal Surface for several seconds. Only handle the Server Network
Card by its edges and do not touch the gold connectors.
- Turn off the Host Server and any Peripheral Devices that are connected to it (e.g. printers, external hard drives, etc.).
- Unplug the Power Cable from the back of the Host Server, and disconnect any Peripheral Devices that are connected.
- Remove the Cover from the Server Case. Consult the documentation that came with the Host Server for details about doing this safely.
- Locate an open OCP NIC 3.0 Slot and remove the corresponding Slot Cover Plate from the back of the Host Server.
- Gently insert the Server Network Card into the OCP NIC 3.0 Slot. Turn the Locking Screw to attach the Server Network Card to the back of the Server Case/Chassis.
- Return the Cover onto the Host Server.
- Connect one or more Network Cable/s to the RJ45 Ports on the Server Network Card.
- Reconnect all of the Peripheral Devices disconnected in Step 2.
- Reconnect the Power Cable to the back of the Host Server.
- Turn on the Host Server and Peripheral Devices.
Download the Driver
- Navigate to www.startech.com/OR41GI-NETWORK-CARD
- Click the Drivers & Downloads tab.
- Under Driver(s), download the Driver Package.
Install the Driver
Windows
-
Right-click the zipped Driver Package that was downloaded. Click Extract All. Follow the on-screen instructions to extract the files.
Note : Windows usually saves the files to the Downloads folder associated with the user account (e.g. C:\Users\useraccount\Downloads) -
Follow the instructions on the accompanying Intel_Windows_DIG file for further Installation Instructions.
Linux
- Extract the contents of the Driver Package.
- Follow the instructions on the accompanying README file for further Installation Instructions
Regulatory Compliance
FCC – Part 15
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by StarTech.com could void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du
Canada
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Warranty Information
This product is backed by a two-year warranty. For further information on
product warranty terms and conditions, please refer to
www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP
(or their officers, directors, employees or agents) for any damages (whether
direct or indirect, special, punitive, incidental, consequential, or
otherwise), loss of profits, loss of business, or any pecuniary loss, arising
out of or related to the use of the product exceed the actual price paid for
the product. Some states do not allow the exclusion or limitation of
incidental or consequential damages. If such laws apply, the limitations or
exclusions contained in this statement may not apply to you.
Verify the Driver Installation
Windows
- Navigate to the Device Manager.
- Under Network Adapters, right-click Intel(R) I350 Gigabit Network Connection and click the Properties option.
- Confirm that the Driver is installed and working as expected.
Linux
Note : Ensure Linux kernel 2.4 (LTS) or higher is being used. Execute the
following command from the terminal prompt to check the kernel version, uname
-r.
- Open a Terminal Window and type the command sudo dmesg | grep Intel to check the Intel Driver Integration.
- You should see the following response if the drivers are present, Intel(R) Gigabit Network Driver.
Safety Measures
Read the entire manual and ensure the instructions are fully understood before
assembling and/or using this product.
-
StarTech.com Ltd.
45 Artisans Crescent London, Ontario N5V 5E9 Canada -
StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom -
StarTech.com LLP
4490 South Hamilton Road Groveport, Ohio 43125 U.S.A. -
StarTech.com Ltd.
Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands
- FR : startech.com/fr
- DE : startech.com/de
- ES : startech.com/es
- NL : startech.com/nl
- IT : startech.com/it
- JP : startech.com/jp