ELEGOO 2A5HX OwlBot Smart Robot Car Kit Installation Guide
- June 10, 2024
- ELEGOO
Table of Contents
2A5HX OwlBot Smart Robot Car Kit
Product Information
This device is compliant with Part 15 of the FCC Rules. It is
designed to not cause harmful interference and must accept any
interference that may cause undesired operation.
Any changes or modifications not approved by the party
responsible for compliance could void the user’s authority to
operate the equipment. Please refer to the user manual for
instructions on proper usage.
Product Usage Instructions
-
Ensure that the device is properly plugged in and powered
on. -
Refer to the user manual for specific instructions on how to
use the device, including any safety precautions or warnings. -
Do not make any changes or modifications to the device without
prior approval from the party responsible for compliance. -
If you experience any interference or undesired operation,
refer to the troubleshooting section of the user manual for
possible solutions. -
When not in use, turn off or unplug the device to conserve
energy and prevent any potential hazards.
Following these usage instructions will ensure proper and safe
operation of the device.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: — Reorient or relocate the receiving antenna. —
Increase the separation between the equipment and receiver. — Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. — Consult the dealer or an experienced radio/TV
technician for help.
Warning: changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment