Nexete Smart Wireless Light Switch Dimmer Switch and Receiver Kit User Guide
- May 15, 2024
- Nexete
Table of Contents
Nexete Smart Wireless Light Switch Dimmer Switch and Receiver Kit
Quick-start Guide
Works with energy-efficient dimmable light bulbs:
Electrical rating : 120V~ 50/60Hz
Dimmable LED —up to 200 W
Dimmable CFL —up to 200 W
Halogen— up to 300 W
Incandescent -up to 300 W
NOTE : You can mix and match dimmable LED and CFLs as well as halogen
and incandescent light bulbs with Lamp dimmers.
Dimmable LED and CFL light bulbs vary in their dimming performance. If you’re
using these blubs and they flicker or turn off, please Please choose to
replace the dimmer bulb that matches.
Important notes:
- For indoor use only.
- Operate between 32 °F (0 °C) and 104 °F (40 °C).
Wiring mode
RF remote control learning
- A Turn off the power when operating
- Press and hold the “Learn” button on the remote
RF remote control clearing
Press and hold the “Learning “button on the controller for 10 seconds until the LED and light flash for 2 times,clearing succeeded.(remotes and app are all clearing)
Just link to the Amazon Echo in one step
Common commands
- “Alexa set the bedroom light to fifty percent.”
- “Alexa, turn on the bedroom light.”
- “Alexa, turn off the first light.”
Troubleshooting
Warning:
To avoid overheating and possible damage to other equipment, do not use to
control motor-driven appliances or transformer-supplied appliances.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>