profi-pumpe 750 Regen Star Super Instruction Manual

July 12, 2024
profi-Pumpe

profi-pumpe 750 Regen Star Super

profi-pumpe-750-Regen-Star-Super-product

Specifications

  • Product Name: Submersible Pumps
  • Versions: 24.05
  • Models:
    • Regen-Star Super 750 (5 005 003 005)
    • Regen-Star Super 900 (5 005 003 006)
    • Regen-Star Super 1000 (1A-P-AS100)
    • Regen-Star Super 1400 (1A-P-AS140)
    • Regen-Star 800-3 (1A-P-AS080-3)
  • Website: www.profi-pumpe.de

Product Usage Instructions

Safety Instructions and Warnings
Please read the user manual before using the device. Always pull the power plug before any maintenance or handling. Be aware of warning signs and electrical voltage hazards.

Introduction
Congratulations on your pump purchase. Functional security and operational safety are our top priorities.

Ranges of Application
These pumps are designed for pumping clear water without mud and sand. They can be used for various applications such as filling and emptying rain tanks, water re-circulation, rainwater use in house and garden, pumping water from streams, ponds, and more.

Installation
Attach a long rope to the handle before first use. Submerge the pump into the liquid using this rope. Install the pump ensuring the suction openings are not blocked by debris. Keep the appliance stable on a firm base.

Servicing
Regular servicing is recommended to maintain optimal pump performance. Refer to the user manual for specific maintenance guidelines.

Recognizing and Repairing Mistakes

Problem Possible Cause Solution
Pump runs, no water is being pumped Air in the system (cannot escape) or

impeller wheel is
blocked| Let out air from the system or clean the impeller wheel
Pump does not start or switches itself off| Engine guard has switched pump off, pump needs cooling, no
electricity, or pump inserted too deep| Check engine guard, ensure cooling, check electrical
connections, adjust pump depth
Pump runs, capacity slows down or stops| Hose connections have a leak or impeller wheel is worn
down| Check for leaks in hose connections, and replace worn impeller
wheel if necessary

FAQ

  • Q: Can these pumps be used for continuous operation?
    A: These pumps are designed for intermittent use. Continuous operation may lead to overheating and reduced lifespan.

  • Q: What is the maximum water depth these pumps can handle?
    A: The pumps can be lowered up to a water depth of 7m or up to 19m depending on the model. Refer to the technical data forspecific information.

SUBMERSIBLE PUMPS
Version 24.05

OPERATING INSTRUCTIONS

profi-pumpe-750-Regen-Star-Super- \(1\)

Technical changes, misprints and mistakes reserved! Newest information about our products can be found online : http://www.profi-pumpe.de

SAFETY INSTRUCTION AND WARNINGS

profi-pumpe-750-Regen-Star-Super- \(2\)

INTRODUCTION

We would like to congratulate you on the purchase of our pump. We appreciate your trust. That‘s why funtional security and operational safety stands by us on first place.

To prevent damage to persons or property, you should read this user manual carefully. Please observe all safety precautions and instructions for proper use of the pump. Failure to follow the instructions and safety precautions can result in injury or property damage.
Please keep this manual with the instructions and safety instructions carefully in order to at any time you can restore them. Please always download the latest version of the user manual of www.profi-pumpe.de under „downloads“. This shall always prevail.

IN GENERAL

The pumps are developed according to the newest stand of technology, manufactured with much care and go under strict intensive controls. These pumps were optimised by us in particular for the special demands in dirty water areras. Make sure after unpacking the pump that the data given on the type label match with the included operating instructions. In case of doubt the pump is not to be used.
Transport damages are immediately to be reported to the package distributor and to us in written form.

RANGES OF APPLICATION

These pumps are made for pumping clear water (free of mud and sand, see technical data and point 6)
The pumps are made for the following ranges of application:

  • Filling and emptying rain tanks and containers
  • For water re-circulation
  • For rainwater use in house and garden
  • Pumping water from a brook a stream
  • Use in a pond
  • Others

IMPORTANT!
The pumps are designed for pumping clean water and chemically non-aggressive liquids. Any gua-rantee is void in case of improper use. They are not suitable for pumping flammable liquids or for use in places where there is danger of an explosion. The pumps are designed for home use in the house and garden. The pumps are not designed for continuous operation or for professional work. Never run more than 5 minutes against a closed valve pump. Save the pump against dry running (install dry run protection).
Never start and stop the pump more than 20 times per hour. When the pump clocks, any claim under warranty is void. Not suitable for use with solar photovoltaic panels. Submersi-ble pumps may not be used in swimming pools.

OPERATION

The installation must be performed by a qualified professional.
Please, check each time before using, the electrical connections and the cables are not da-maged. Check before the installation whether the electrical connections are earthed accor-ding to the statutory regulations and are installed. The pump is to be secured through a RCD circuit breaker with release current of 30 mA.
Also, it is NOT recommended to perform, for example, a cable extension. It is not certain whether this modification is technically correct, so this warranty is void. It must be ensured that the pump is sufficiently cooled during prolonged operation.
It is not recommended to perform even cable extensions or other technical modifications. A transfer of mechanical loads or vibrations from the pump or must be eliminated through appropriate measures (rubber buffers, braided hoses, line fixation, etc.).
All cables to and from the pump must be sealed. Check valve and water pipes for leaks at least by means of pressure testing for 24h.

INSTALLATION

Attach a sufficiently long and strong rope to the handle before first use. The pump is submerged into the liquid on this holding rope and can also be carried with it as well as with the handle.

Note:
In the case of continuous use of the pump with the rope, the condition of the rope must be checked regularly as it can decay and break over time.

  • Connect pressure pipe. For occasional use, use a suitable water hose. The use of rigid pipes with a non-return valve is recommended for use at a fixed location. This prevents return flow of the liquid when switching off.
  • Screw pressure line onto the pressure connection. All threaded connections must be sealed with thread sealing tape (e. g. Teflon® tape).
  • When using a hose, screw a suitable hose adapter onto the pressure connection.
  • Push the hose firmly onto the hose adapter and secure with a hose clamp.
  • When used in rainwater tanks, the installation of a floating outlet is mandatory for the Rain-Star SUPER 750/900/1000/1400. Attach the end of the floating tapping using a separate retaining cable so that the suction of dirt, especially bottom sediment, is always prevented even when the tank is empty.

Schematic illustration as an example. Please refer to the offer description for the contents of delivery.
Schematic illustration as an example. Please refer to the offer description for the contents of delivery.

profi-pumpe-750-Regen-Star-Super- \(3\)

Schematic illustration as an example. Please refer to the offer description for the contents of delivery.

profi-pumpe-750-Regen-Star-Super- \(4\) profi-
pumpe-750-Regen-Star-Super- \(5\)

  • The pumps can be lowered up to a water depth of 7m or depending on the model to 19m (see technical data on last page).
  • Install the appliance so that the suction openings cannot be blocked by debris (place the appliance on a firm, even base if necessary).
  • Ensure that the appliance is stable.

SERVICING

Under normal pumping conditions the pump requires no servicing. From an operating period (with clear water) of approx. 2000 hours the mechanical components should be checked: impeller wheels, chambers, sealing rings etc. on wear and if necessary be changed. After 3000 pumping hours the oil in the chamber should also be changed, if necessary (only with oil-dipped engine types!).
Please, only fill it up to 80% and check the sealing rings always for density.
With abrasive materials like sand the servicing duration can become shorter.
The following controls should be carried out regularly:

  • Intactness of the electric cable
  • That the connection hoses are not bent or broken
  • Cleanness of the pump medium
  • Moreover, the pump should be emptied with risk of frost, be washed out with clear water and stored dry.

RECOGNISING AND REPAIRING OF MISTAKES

Problem Possible cause Solution
**** Pump runs, no water is being pumped Air in the system (cannot escape)

Air in the system must be let out
Impeller wheel is blocked| Impeller wheel must be cleaned
Pump does not start or

switches itself off

| Engine guard has switched the pump off| Pump needs to be cooled
No electricity| Check electrical connections
Pump runs, Pump capacity slows down or stops| Pump is inserted to deep| Insert pump not so deep
Hose connections systems have a leak| Check hose connection systems
Impeller wheel is worn down| Change impeller wheel
Filter has become dirty| Clean filter
When you turn on the pump, RCD circuit breaker is triggered| Pump could have a leak| Check pump for moisture damage
Condensation in the electrical connection / junction box| Unplug the pump / contact the distributor

GUARANTEE REGULATIONS
For all manufacturing and material defects, the statutory warranty applies. In these cases we take the replacement or repair of the pump. Shipping costs shall be borne by our company, except as required by law. Please report the warranty on our service platform http://www.profi-pumpe.de/service.php. We will inform you how to proceed with case-related. Returns please sufficient postage. Unfortunately not prepaid returns can not be accepted because they are filtered out before delivery. Our service we provide in Germany.
The warranty does not cover:

  • Improper installation (self-installation, unauthorized persons)
  • Material wear (sealing rings, impeller wheels, impeller chambers)
  • Unjustified interventions or changes in the pump
  • Damages by selffault
  • Improper servicing and improper use
  • DRY RUNNIG (Also partially!) of the pump
  • Moreover, we give no damage compensation for secondary damages!

SECURITY TIPS

  • Obey absolutely valid regulations on the electrical security
  • Never run pump dry
  • Pumping inflammable, as well as all other aggressive liquids is prohibited
  • Pay attention to the medium temperature max. 35°C
  • Never pull the pump on the electrical cable or pressure hose
  • Avoid cross section narrowing
  • Pay attention to the given particle size
  • The grain size mentioned does not refer to sand or stones but rather to soft, flexible particles such as fluff and similar which the rotor cannot wedge inside the pump.
  • During longer unused times, clean the pump, wash it out with clear water, dry and store it at room temperature
  • Test wells for enough flowing water (dry run danger)
  • The pump is to be secured through a RCD circuit breaker with a release current of 30 mA.
  • The electrical connections are always to be carried out by an authorised professional.
  • The pump may be used by children aged 8 years and above as well as persons with reduced physical, sensory or mental abilities or those who lack skills, experience and knowledge only if they are supervised. These aforementioned persons should only use the appliance while adhering to safe instructions and resulting dangers.
  • Cleaning and maintenance must not be carried out by children without supervision.
  • The pump must not be used or operated under any circumstances when there are people in the same water.
  • Under certain cirumstances, it is possible that that contamination of water is caused by leakage.

THE MANUFACTURER EXPLAINS

  • To take over no responsibility in the case of accidents or damages on the basis of careless-ness or disregard to the instructions in this book.
  • To reject every responsibility for the damages which originate from the improper use of the pump.

NOTES ON PRODUCT LIABILITY
We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if no changes were made to the equipment. If repairs are carried out by our authorized service, we are only liable if original spare parts and accessories were used.

NOTES ON DISPOSAL

Electro devices of our company, labeled with the symbol of the crossed trash bin, are not permitted to be disposed in your household garbage. We are registered at the German registration department EAR under the WEEE-No. DE79535656.
This symbol means, that you’re not allowed to treat this product as a regular household waste item – it has to be disposed at a recycling collection point of electri-cal devices. This is the best way to save and protect our earth.
THANK YOU FOR YOUR SUPPORT!

EU DECLARATION OF CONFORMITY

The undersigned, Amur S.à r.l., 36, Rue de la Gare, L-5540 Remich, certifies that the product named overleaf, namely TAUCHPUMPEN REGEN-STAR SUPER 750 / 900 / 1000 / 1400 / 800-3 as placed on the market, complies with the relevant provisions listed below, the relevant EU harmonised directives and the EU standard for safety. This declaration of conformity applies insofar as no modifications are made to the product. The sole responsibility for issuing this declaration of con-formity lies with the manufacturer.
The sole authorised person to keep the technical documents:
Amur S.à r.l. – 36, Rue de la Gare – L-5540 Remich

Low Voltage Directive (2006/95/EC)
EC Electromagnetic compatibility directive (2004/108/EC)
The following harmonized standards:
EN 60335-1:2012/A11:2014; EN60335-2-41:2003/A2:2010; EN62233:2008
EN55014-1:2006/A2:2011; EN55014-2:1997/A2:2008; EN61000-3-2:2014; EN61000-3-3:2013
Signed for and on behalf of:
Amur S.à r.l.
Remich, 24.05.2024

TECHNICAL DATA

English| | REGEN-STAR SUPER 800-3| REGEN-STAR

SUPER 750

| REGEN-STAR

SUPER 900

---|---|---|---|---
Power (P1)| | 800 W| 750 W| 900 W
Max. pump capacity*| | 6,5 m³/h| 4,5 m³/h| 4,5 m³/h
Max. pressure| | 3 bar| 4,5 bar| 6 bar
Max. pump height| | 30 m| 45 m| 60 m
Max. particle size| | 0,5 mm| 0,2 mm| 0,2 mm
Max. water temperature| | 35°C| 35°C| 35°C
Max. submersion depth| | 7 m| 15 m| 15 m
Protective class| | IPX8| IPX8| IPX8
Tension| | 230V/50 Hz| 230V/50 Hz| 230V/50 Hz
Measures in cm| | tba / folgt| tba / folgt| tba / folgt
Weight| | ca. 9 kg| ca. 16 kg| ca. 16 kg
Pressure connection| | G11/4”| G1“| G1“
Cable length| | 10 m| 25 m| 25 m
English| | REGEN-STAR

SUPER 1000

| REGEN-STAR

SUPER 1400

|
Power (P1)| | 1000 W| 1400 W|
Max. pump capacity*| | 5,8 m³/h| 5,8 m³/h|
Max. pressure| | 3,3 bar| 5,8 bar|
Max. pump height| | 33 m| 58 m|
Max. particle size| | 0,2 mm| 0,2 mm|
Max. water temperature| | 35°C| 35°C|
Max. submersion depth| | 19 m| 19 m|
Protective class| | IPX8| IPX8|
Tension| | 230V/50 Hz| 230V/50 Hz|
Measures in cm| | tba / folgt| tba / folgt|
Weight| | ca. X kg| ca. X kg|
Connections| | 1” IG| 1” IG|
Cable length| | XX m| XX m|

All products listet in this manual are Made in PRC.

Amur S.à r.l.
www.amur.lu
Email: info@amur.lu
Tel.: +49 611 9458777-0
Fax: +49 611 9458777-11

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

profi-Pumpe User Manuals

Related Manuals