Charbroil 463650805 Grill Owner’s Manual

July 11, 2024
CharBroil

Charbroil 463650805 Grill

Product Specifications:

  • Model: 463650805
  • Brand: Charbroil
  • Parts Included: Axle Bolt, Vaporiser Bar, Logo Plate, LegExtender
  • Compatible Models: 3592

Product Usage Instructions

Assembly:

  1. Identify all the parts mentioned in the manual.
  2. Follow the step-by-step instructions provided for assembling the grill.
  3. Ensure all parts are securely attached before use.

Grilling:

  1. Preheat the grill to the desired temperature.
  2. Place the food on the grill grates.
  3. Cook the food according to your recipe or preference.
  4. Ensure proper ventilation during grilling.

Cleaning and Maintenance:

  1. Allow the grill to cool down before cleaning.
  2. Regularly clean the grill grates and surfaces to prevent buildup.
  3. Inspect and replace any damaged parts as needed.

Frequently Asked Questions

  • Q: Where can I find genuine replacement parts for Charbroil 463650805?
    • A: Genuine replacement parts can be found at the Appliance Factory Parts online store.
  • Q: How do I clean the vaporiser bar?
    • A: To clean the vaporiser bar, remove it from the grill, scrub it with a brush and soapy water, rinse thoroughly, and let it dry before placing it back in the grill.

Parts List

Installation Instruction

Parts to assemble:

  • 2 Leg Assembly
  • 1 Front Panel
  • 2 Side Support Brace
  • 4 Carriage Bolt, 2′
  • 4 Plastic Tee Knob
  • A. Lay leg assemblies on their sides.
  • B. Place front panel on legs.
  • C. Braces attach to inside of legs.
  • D. Secure with carriage bolts and tee knobs.

Parts to assemble:

  • 1 Back Support Brace
  • 4 Carriage Bolt, 2″
  • 4 Plastic Tee Knob
  • A. Turn assembly upside down.
  • B. Secure back brace and side braces to legs with carriage bolts and tee knobs.

Parts to assemble:

  • 1 Tank Support Bracket
  • 2 Wheel
  • 2 Axle Bolt
  • 2 Hitch Pin
  • 2 Leg Extender
  • A. Insert axle bolts through wheels, left legs and bracket. Bracket fits inside legs.
  • B. Secure with hitch pins in ends of axle bolts.
  • C. Push leg extenders into rightlegs.

Parts to assemble:

  • 1 Grill Bottom Assembly
  • 4 Carriage Bolt, 1½*
  • 4 Metal Wing Nut
  • 2 Control Knob
  • A. Stand cart upright.
  • B. Make sure ignitor wire is connected to ignitor.
  • C. Place grill bottom onto supports. Control panel overlaps front panel.
  • D. Secure with carriage bolts and wing nuts.
  • E. Press control knobs onto valves.

Parts to assemble:

  • 1 Vaporiser Bar
  • 1 Cooking Grate
  • A. Place vaporiser bar onto the two inner support ridges at each end of grill bottom. Bar should rest between the outer support ridges. See inset below.
  • B. Place cooking grate onto grill bottom.

Parts to assemble:

  • 2 Side Shelf
  • 8 Carriage Bolt, 2″
  • 8 Plastic T Knobs
  • A. Place shelves onto legs (curved edge inward).
  • B. Secure with carriage bolts and T knobs.

Parts to assemble:

  • 1 Grill Lid
  • 1 Handle
  • 1 Logo Plate
  • 2 Metal Wing Nut
  • 2 Hinge Pin
  • 2 Hitch Pin
  • A. Attach lid to grill bottom with hinge and hitch pins.
  • B. Attach handle to lid with two metal wing nuts.
  • C. Snap logo plate into lid.

Parts to assemble:

  • 1 SwingAway
  • A. Slide rear pivot wire of SwingAway into holes in grill lid.
  • B. Insert leg wires into top hole of three-hole pattern in side of grill bottom.

Parts to assemble:

  • 1 Tank Retainer Wire
  • 1 Carriage Bolt, 1¼*
  • 1 Plastic Tee Knob
  • A. Attach retainer wire to left side brace with carriage bolt and tee knob. Leave loose.

Parts to assemble:

  • 1 LP Gas Tank
  • LP tank is shipped empty. Fill and leak check before attaching to grill and regulator.
  • A. Center LP tank on support bracket with collar opening to front.
  • B. Slide retainer over tank collar and tighten tee knob.

CAUTION

Tank collar opening must face to front of cart once tank is attached. Failure to install tank correctly may allow gas hose to be damaged in operation, resulting in the risk of fire.

See the Use & Care manual to perform the “Burner Flame Check” and for important safety instructions before using.

Parts to assemble:

  • 1 Grease Clip
  • A. Hang grease clip beneath grill bottom.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals