WILTRONICS GT4259 Mini RC Race Car Instruction Manual

June 6, 2024
WILTRONICS

Wiltronics-Logo

WILTRONICS GT4259 Mini RC Race Car

WILTRONICS GT4259 Mini RC Race Car-fig1

  • please read the instructions carefully before using
  • please take care of the instructions for use at a later date

Contents

Part details

Preparation

  1. Open the can, detach the can cover and can body. Push the LOCK inside the can cover towards the direction shown
    to release.

  2. Take out the transmitter and car from the can body. Slide the car by the direction shown in the picture, to release.

  3. Slide the transmitter’s battery compartment cover towards the direction shown and .open it

  4. lnsert2 xAA batteries with the correct polarity, then place the battery compartment cover back into place. Distributed by:
    Electus Distribution Ply. Ltd.
    320 Victoria Rd, Rydalmere
    NSW 2116 Australia
    www.electusdistribution.com.au
    Made in China

Operation

  1. After installing the battery on the remote control, turn the switch to the ON position – the frequency light should flash. Once the frequency light stops flashing, the mini racer has paired with the transmitter sucessfully.
    If the frequency light continues to flash, the transmitter has not connected to the transmitter.WILTRONICS GT4259 Mini RC Race Car-
fig6

  2. Transmitter (Remote Control) Functions:

    • Press any button on transmitter when the mini racer is switched on – the frequency light will turn on and the car
      will move accordingly.

    • The arrow buttons move the car in the corresponding direction.

  3. Adjust the Directional Guide under the front of the mini racer to calibrate the alignment. This helps with straight-line
    movement and more accurate turning.WILTRONICS GT4259 Mini RC Race Car-
fig7

Charging the mini racer

  1. Open the charger cover as illustrated and take out the CHARGING PLUG.

  2. Insert the CHARGING PLUG to the CHARGING JACK on the bottom of the mini racer, the CHARGING INDICATOR lights up indicate the charging  is in process. Make sure the power switch of the car JP is turned off. II is normal for the frequency lamp to flash when charging. When charging,the charging head should be recognized the direction, and remember to tum off the switch when
    not in use.

  3. The mini racer is fully charged when the CHARGING @ INDICATOR goes off. Charging time: 3-4 minutes.

Caution

  • Different types of batteries or new and used batteries are not to be mixed.
  • Only batteries of the same or equivalent type are recommended to be used.
  • Exhausted batteries should be removed from the product.
  • Do not dispose batteries in fire, or batteries will explode of leak.
  • The supply terminals are not to be short-circuited.
  • Batteries are to be inserted with the correct polarity.
  • Non-rechargeable batteries are not to be recharged.
  • Rechargeable batteries are only to be charged under adult supervision.
  • Rechargeable batteries are to be removed from the product before being charged {if removable).
  • Remove batteries if the product is not to be used for an extended period.
  • The packaging has to be kept since it contains important information.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals