Charbroil 463531705 Grill Owner’s Manual

: July 11, 2024
: CharBroil

Table of Contents

Charbroil 463531705 Grill
Product Usage Instructions
Frequently Asked Questions
Parts List
Installation Instruction
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Charbroil 463531705 Grill

Specifications:

Model: Charbroil 463531705
Manufacturer: Charbroil
Parts Included: Grease Cup, Vaporiser Bar, Axle Bolts, Leg Extenders
Model Number: 463531705

Product Usage Instructions

Assembly:

Identify all parts listed in the Parts List section of the manual.
Follow the assembly instructions provided in the manual to put together the grill.
Make sure all components are securely attached before use.

Operating the Grill:

Place the grill on a flat, stable surface away from any flammable materials.
Connect the gas supply following the manufacturer’s guidelines.
Ignite the grill according to the ignition method specified in the manual.
Adjust the temperature settings as desired using the controls.

Cleaning and Maintenance:

Allow the grill to cool completely before cleaning.
Regularly clean the grates, grease cup, and other removable parts with warm, soapy water.
Inspect and replace any worn-out parts to ensure safe operation.

Frequently Asked Questions

Q: How often should I clean the grill?
- A: It is recommended to clean the grill after every use to prevent grease buildup and maintain optimal performance.
Q: Can I use this grill indoors?
- A: No, this grill is designed for outdoor use only due to the gas-fueled operation and ventilation requirements.

Parts List

Installation Instruction

Parts to assemble:

2 Leg Assembly
1 Front Panel
2 Side Support Brace
4 Carriage Bolt, 2″
4 Plastic Tee Knob
A. Lay leg assemblies on their sides.
B. Place front panel on legs.
C. Braces attach to inside of legs.
D. Secure with carriage bolts and tee knobs.

Parts to assemble:

1 Back Support Brace
4 Carriage Bolt, 2″
4 Plastic Tee Knob
A. Turn assembly upside down.
B. Secure back brace and side braces to legs with carriage bolts and tee knobs.

Parts to assemble:

1 Tank Support Bracket
2 Wheel
2 Axle Bolt
2 Hitch Pin
2 Leg Extender
A. Insert axle bolts through wheels, left legs and bracket. Bracket fits inside legs.
B. Secure with hitch pins in ends of axle bolts.
C. Push leg extenders into rightlegs.

Parts to assemble:

1 Grill Bottom Assembly
4 Carriage Bolt, 1/*
4 Metal Wing Nut
2 Control Knob
A. Stand cart upright.
B. Make sure ignitor wire is connected to ignitor.
C. Place grill bottom onto supports. Control panel overlaps front panel.
D. Secure with carriage bolts and wing nuts.
E. Press control knobs onto valves.

Parts to assemble:

1 Vaporiser Bar
1 Cooking Grate
A. Place vaporiser bar onto the two inner support ridges at each end of grill bottom. Bar should rest between the outer support ridges. See inset below.
B. Place cooking grate onto grill bottom.

Parts to assemble:

2 Side Shelf
8 Carriage Bolt, 2°
8 Plastic T Knobs
A. Place shelves onto legs (curved edge inward).
B. Secure with carriage bolts and T knobs.

Parts to assemble:

1 Grill Lid
1 Handle
1 Machine Screw, 1%
1 Metal Wing Nut
2 Hinge Pin
2 Hitch Pin
A. Attach lid to grill bottom with hinge and hitch pins.
B. Attach handle to lid with machine screw and metal wing nut.

Parts to assemble:

1 Tank Retainer Wire
1 Carriage Bolt, 1¼*
1 Plastic Tee Knob
A. Attach retainer wire to left side brace with carriage bolt and tee knob. Leave loose.

Parts to assemble:

1 LP Gas Tank
LP tank is shipped empty. Fill and leak check before attaching to grill and regulator.
A. Center LP tank on support bracket with collar opening to front.
B. Slide retainer over tank collar and fighten tee knob.

CAUTION

Tank collar opening must face to front of cart once tank is attached.
Failure to install tank correctly may allow gas hose to be damaged in operation, resulting in the risk of fire. See Use & Care manual to perform the “Burner Flame Check” and for important safety instructions before using.

Parts to assemble: