bloody M320 Noise Cancelling Bluetooth Gaming Headset User Manual

June 8, 2024
bloody

QUICK START GUIDE
M320

| Qualcomm® aptX™ HD
---|---
| HYBRID ACTIVE NOISE CANCELLING
| BT v5.0 + WIRED
| 40MS LOW LATENCY

WHAT’S IN THE BOX

bloody M320 Noise Cancelling Bluetooth Gaming Headset-
fig1

KNOW YOUR PRODUCT

  • Hybrid Active Noise Cancelling Technology
  • Qualcomm QCC3034 Master Chipset
  • Individual Austria AMS3415 IC
  • Supports Qualcomm Apt-X HD Sound
  • Customized 40mm Graphene Speaker Units
  • Multi-Point Connection
  • Extremely Light Weight: 252g

bloody M320 Noise Cancelling Bluetooth Gaming Headset-
fig2

CONTROL ON YOUR FINGERS

bloody M320 Noise Cancelling Bluetooth Gaming Headset-
fig3

WIDE COMPATIBILITY

Note: You can only choose one mode to connect the headset. Can not operate different modes at the same time.

bloody M320 Noise Cancelling Bluetooth Gaming Headset-
fig4

CONNECTING BLUETOOTH DEVICE

bloody M320 Noise Cancelling Bluetooth Gaming Headset-
fig5

  1. Long press the power button for 3S, the indicator light flashes in red and blue alternately when pairing.
  2. Choose “M320” from your Bluetooth device.
  3. The indicator light off after the headset is connected.

CONNECTING WIRED DEVICE

bloody M320 Noise Cancelling Bluetooth Gaming Headset-
fig6

The AUX 4-Pin 3.5mm audio cable is included. Just plug into the headset and enjoy it.
(For The Second Time Use)

bloody M320 Noise Cancelling Bluetooth Gaming Headset-
fig7

The device you connected last time will be remembered. Automatically connect back to the last device after power on.
Warm Tips: Make sure the Bluetooth devices is turned on.

CHARGING/LOW BATTERY INDICATOR

bloody M320 Noise Cancelling Bluetooth Gaming Headset-
fig8

Flashing red light indicates when the battery is below 25%.

TECHSPEC

Graphene Driver: 40mm
Frequency: 20Hz – 20KHz
Impedance: 32 ohm
Sensitivity: 100 dB
Mic. Type: Omnidirectional (CVC Noise Cancelling)
Mic. Frequency: 100Hz – 10KHz
Mic. Sensitivity: -42 dB
Wired Mode: 4-Pin 3.5mm Audio
Wireless Mode: Bluetooth v5.0
Operation Distance: Up to 10 m (32 feet)
Battery Type: 500mA Lithium Battery
Charging Time: 1.5H
Playback Time: ANC Off: 25 Hours (50% volume)

ANC On: 12 Hours (50% volume)
Cable Length:| Type-C Charging Cable: 60 cm 3.5mm Audio Cable: 150 cm
Weight| 252g

SAFETY RULES

  1. To avoid hearing damage. do not use headphones at a high volume for a long time.
  2. Never disassemble or modify your headphones for any reason. Otherwise. it may cause the headphones to malfunction, which is not covered by the warranty.
  3. Do not get the device wet with liquids, otherwise will cause serious damage to the device. Damage caused by water entering the device will not be covered by the manufacturer’s warranty.
  4. Please do not place the product in an environment where the temperature is too low (above 45°C or below -20°C).
  5. Do not place your device’s light close to your eyes.
  6. Not suitable for children under 3 years old. 7. Do not use the device during a thunderstorm.

WARNING STATEMENT

THE FOLLOWING ACTIONS MAY DAMAGE THE PRODUCT.

  1. To disassemble, bump. crush, or throw into the fire is forbidden for lithium batteries.
  2. Do not expose under the strong sunlight.
  3. The discard of the battery should obey the local law, if possible please recycle it. Do not dispose of it as household garbage. because it may cause an explosion.
  4. Do not continue to use if severe swelling occurs.
  5. Please try to avoid charging in an environment below 0 C.
  6. The user is not allowed to remove or replace the batteries unless specified statement in the user manual.

The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Bloody is under license. Other trademarks and trade names are those of their respective owners.

FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

bloody -qr Bloody.com

Documents / Resources

| bloody M320 Noise Cancelling Bluetooth Gaming Headset [pdf] User Manual
M320, 2AXWI-M320, 2AXWIM320, M320 Noise Cancelling Bluetooth Gaming Headset, Noise Cancelling Bluetooth Gaming Headset, Bluetooth Gaming Headset, Gaming Headset, Headset, Bluetooth Headset
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

bloody User Manuals

Related Manuals