V-TAC VT-753 STAND LAMP Installation Guide
- June 7, 2024
- V TAC
Table of Contents
INSTALLATION DIAGRAM:
STAND LAMP (VT-753)
TECHNICAL DATA
| MODEL | VT-753 |
|---|---|
| MAX WATTS | LOW |
| IP RATING | IP44 |
| HOLDER | E27 (Bulb not included |
| BODY TYPE | ALUMINIUM + GLASS |
| INPUT POWER | AC: 220-240, 50Hz |
| DIMENSION | 170X403mm |
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
other queries, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at your best.
The warranty is valid for 3 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours of Daily operation. Usage of product for 24 hours a day would
void the warranty. This product is warranted for manufacturing defects only.!
! WARNING
- ENSURE ELECTRICITY IS SWITCHED OFF BEFORE INSTALLATION.
- PLEASE READ THROUGH ALL THE FOLLOWING INSTRUCTIONS BEFORE INSTALLING THE UNIT.
- THE USER SHOULD PREPARE NECESSARY ACCESSORIES AND SPARE PARTS (NOT PROVIDED).
- INSTALLATION MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN.
| This marking indicates that this product should not be disposed of with
other household wastes.
---|---
| Caution, risk of electric shock.
INSTALLATION DIAGRAM:
INSTALLATION INSTRUCTION
- Turn off the power.
- Drill a hole in the ground (as per the distance shown on pic 5).
- Dig the plastic into the hole.
- Fixing the bracket onto the ground.
- Open the lamp and install the bulb in the lamp.
- Close the clamp and tighten the screws.
- Connect supply leads with terminal brown (L) to brown, blue (N) to blue, and greenish-yellow ( ) to greenish-yellow.
- Tighten the nuts to fix down the lamp.
- Turn on the Power.
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest
dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>