AX TECHNOLOGIES BTHP-1 Wireless Headphone Instruction Manual
- October 30, 2023
- AX TECHNOLOGIES
Table of Contents
AX TECHNOLOGIES BTHP-1 Wireless Headphone
Wireless Headphone
The wireless headphone is designed to provide an exceptional listening experience to its users. It comes with several features that ensure seamless connectivity and easy usage.
Power ON/OFF
To turn on the headphones, press and hold the button for 2 seconds. To turn off the headphones, press and hold the button for 5 seconds. The headphones automatically enter wireless mode when turned on.
Wireless Function
The headphones can be paired with any wireless-enabled device.
To pair the headphones, follow these steps:
- Ensure that the headphones are in wireless mode (the indicator light will flash blue and red).
- Search for and select “FunFones” on your wireless-enabled device.
- The headphones will prompt when the device is successfully paired, and the indicator light will turn steadily blue.
Listen to Music
To listen to music in wireless mode:
-
Ensure that the headphones are paired with your
wireless-enabled device. -
Play music on your device.
Phone Features
The headphones come with several phone features that allow you to answer and make calls, adjust volume, redial, and reject incoming calls.
Receiving a Call
To answer an incoming call while playing music in wireless mode, press the button once. To end the call, press the button once again. The indicator light turns steady blue.
Volume
To increase or decrease the call volume while taking a call, short press + or – respectively.
Redial
To redial the last number, press the button twice.
Reject an Incoming Call
To reject an incoming call, press and hold the button for 2 seconds.
Charging
The headphones come with a Micro USB port that you can use to charge the device. To charge the headphones:
- Plug the Micro USB cable into the Micro USB port on the side of the headset.
- Connect the other end of the cable to any USB power source.
- The LED indicator will glow red while the headphones are charging, and turn off when fully charged.
- Charging time is approximately 2 hours, and playing time is approximately 4 hours.
Safety
Do not tamper with the battery to avoid the danger of an explosion. Do not expose the headphones to environments with excessively high temperatures.
Accessories
- USB Charging Cable x 1
- Instruction Manual x 1
FCC ID: 2AJXA-BTHP-1
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
Power ON/OFF
- Press and hold the “ ” button for 2 seconds to turn the headphones On.
- Press and hold the “ ” button for 5 seconds to turn headphones Off.
- The headphones automatically enter into a wireless mode when turned on.
- Wireless Function
- Wireless Pairing: While headphones are in wireless mode (the indicator light will flash blue and red), use your wireless-enabled device to search for and select “FunFones”, the headphones will prompt when the device is successfully paired. The indicator light will turn steadily blue.
Listen to Music
-
Pause/Play Music: Press the “ ” button located on the left side of the headset. The blue indicator light is on once every 5S.
-
Volume: Press and hold “ + ” to increase the volume; press and hold “ – ” to decrease the volume on the headphones. Headphones will play a warning tone when maximum and minimum volume levels are reached. You can also adjust the volume on your device. The blue indicator light is on once every 5S.
-
Next/Previous Song: Short press “ + ” to choose the next song; short press “ ” to choose the previous song. You can also select the next/previous song on your device. The blue indicator light is on once every 5S.
-
Phone Features
-
Receiving a Call: While playing music in wireless mode, when there is an incoming call, press the “ ” button to answer a call; press the “ ” button once again to end the call. The indicator light turns steady blue.
-
Volume: When taking a call, short press “ + ” to increase the call volume; short press “ – ” to decrease the call volume.
Redial: Press “ ” button twice to redial the last number. -
Reject an Incoming Call: Press & hold the “ ” button for 2 seconds to reject a call.
Charging
- Recharging: Plug the Micro USB cable into the Micro USB port on the side of the headset, and connect the other end of the cable to any USB power source. The LED indicator will glow red while the headphones are charging, and turn off when fully charged. Charging time is approximately 2 hours. Playing time is approximately 4 hours.
Safety
- Do not tamper with the battery to avoid the danger of an explosion.
- Do not expose to environments with excessively high temperatures.
Accessories
- USB Charging Cable x 1
- Instruction Manual x 1
- FCC ID: 2AJXA-BTHP-1
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>