GRAU Team Home LED Table Lamp User Guide

: July 11, 2024
: GRAU

Table of Contents

GRAU Team Home LED Table Lamp
Product Usage Instructions
Technical specifications
Care instructions
Safety instructions
Warranty
Scope of delivery
Dimensions
Installation
Disassembly
Functions
Features
Read User Manual Online (PDF format)
Download This Manual (PDF format)

GRAU Team Home LED Table Lamp

Technical Specifications

Protection Class: I
Energy Efficiency Class:
- Indirect Light Component: C
- Direct Light Component: D
Weight: 6 kg
Shaft Length: 104 cm

Product Usage Instructions

General Information
Please clean this product with a dry cloth, preferably a microfiber cloth for sensitive surfaces. Clean the fixture only after it has cooled off.
Safety Instructions
You have purchased a high-quality product that has been manufactured and packaged with care. If you need to complain, contact your dealer. When returning the product, pack it in protective packaging to prevent damage.

Installation

Insert the screws into the base and secure with captive washers.
Place the shaft on a soft surface and align. Tighten the screws lightly, align the foot straight, then tighten. Extend Allen key with enclosed tube for better leverage.
Insert the cover.
Place the lamp head on the shaft, taking care not to pinch the cables. Lightly tighten the four screws.
Align the luminaire head straight. Tighten the outer screws by hand using an Allen key. Tighten the inner screws only slightly, they are only used for adjustment. Do not use a cordless screwdriver.
Insert the eight-pin plug into the socket.
Put the cover in place.

Disassembly
Gently press the lamp cover to release and pull it towards you. Proceed in exactly the same way as for assembly, but in reverse order.

Functions
Smart Switch

Upper Button: Functions in DE/EN
Lower Button: Functions in DE/EN

Note: After turning off and on again, the luminaire will use the last set color temperature and brightness (Memory function).

FAQ

Q: Can I replace the light source in the luminaire myself?
A: No, the light sources with energy efficiency classes C and D can only be replaced by the manufacturer.
Q: What should I do if I notice optical flaws or scratches on the luminaire?
A: Please check the luminaire for optical flaws or scratches before use. Once in operation, the right to claim aesthetic defects expires.

Team Home Manual

Technical specifications

PRI 220 – 240 V / 50 – 60 Hz / SEC max. 60 V 780 mA / 35 W LED, 2700 – 4000 K, Directs CRI 90+
Protection class I
The indirect light component of this luminaire contains a light source with energy efficiency class C; this can only be replaced by the manufacturer
The direct light component of this luminaire contains a light source with energy efficiency class D; this can only be replaced by the manufacturer
6 kg
Suitable for use in dry indoor areas
Proper disposal required after use; do not dispose of in household waste.
CE conformity mark

General information

Please read this manual carefully before assembly and mounting. This will help avoid errors that could lead to a malfunction.
Keep this manual for future reference. This luminaire has been developed for indoor use and is intended for the lighting of rooms.
Differences in LED brightness and white tone are a normal occurrence in manufacture and do not constitute reason for complaint.
The LEDs can be replaced by the manufacturer only.

Care instructions

Please clean this product with a dry cloth, preferably a microfiber cloth for sensitive surfaces. Clean the fixture only after it has cooled off.

Safety instructions

Do not open the luminaire.
This luminaire is to be disposed properly according to EU regulation.

Warranty

You have purchased a high quality product that has been manufactured and packaged with the utmost care. However, if you have any reason to complain, please contact your dealer. We will process your claim as soon as possible. In the event of a return, please ensure that the luminaire is packed in protective packaging to prevent damage in transit.

Scope of delivery

Scope of delivery Quantity
Luminaire head 1
Shaft 1
Base 1
Cover 1
Allen key 2
M5 x 16 / M5 x 16 screws 2
Spare screws and lock washers luminaire head 4

Dimensions

Complaint notice
Please check the luminaire for optical flaws or scratches before use. Once the product has been put into operation, the right to claim for aesthetic defects expires.

Installation

Remove the cover of the lamp base.
Insert the screws into the base and secure with captive washers. Place the shaft on a soft surface and align. Tight-en the screws lightly, align the foot straight, then tighten. Extend Allen key with enclosed tube for better leverage.
Insert the cover.
Place the lamp head on the shaft, taking care not to pinch the cables. Lightly tighten the four screws.
Align the luminaire head straight. Tighten the outer screws by hand using an Allen key. Tighten the inner screws only slightly, they are only used for adjustment. Do not use a cordless screwdriver.
Insert the eight-pin plug into the socket.
Put the cover in place.