GRAU Sun Home Table Lamp LED User Manual
- September 9, 2024
- GRAU
Table of Contents
GRAU Sun Home Table Lamp LED User Manual
Scope of delivery
Luminaire: 1
Protective cover: 1
Cable binder: 1
Technical specifications
PRI 220–240 V /50–60Hz /SEC max. 20 V 500mA /220–240W 1300–2700K, CRI 90+,
850lm
The light source corresponds to energy efficiency class F and can only be
replaced by the manufacturer.
Protection class II
3,2kg
Suitable for use in dry indoor environments.
This product must be properly disposed after its service life;
it cannot be disposed with normal household waste.
CE conformity mark
UKCA conformity mark
Safety instructions
Do not open the luminaire.
- Please be aware that looking into the LED for a very longtime can cause eye damage.
- This luminaire is to be disposed properly according to EU regulation.
General information
- Please read these instructions carefully prior to installation to avoid errors that could lead to malfunction.
- Keep these instructions for future reference. This lamp is designed for indoor use.
- Deviations in brightness and white tone of the LEDs are due to manufacturing and are not grounds for complaint.
- The LEDs in this luminaire can only be replaced by the manufacturer.
Care instructions
Please clean this product with a dry cloth, preferably a microfiber cloth for sensitive surfaces. Clean the fixture only after it has cooled off.
Surface protection
All electroplated surfaces must be protected against any kind of stress, especially the copper parts, as they are only provided with an invisible tarnish protection.
Warranty
You have purchased a high quality product that has been manufactured and
packaged with the utmost care. However, if you have any reason to complain,
please contact your dealer.
We will process your claim as soon as possible. Our warranty only applies to
luminaires that have been properly installed– we therefore recommend that they
be installed by a qualified technician. In the event of a return, please
ensure that the luminaire is packed in protective packaging to prevent damage
in transit.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>