GRAU Parrot LED Floor Lamp User Manual
- June 9, 2024
- GRAU
Table of Contents
- Scope of delivery
- Guarantee
- General information
- Safety instructions
- Care instructions
- Technical data
- Dimensions
- Charging of the luminaire
- Battery capacity
- Agility
- Height adjustment
- Functions of the luminaire
- Sleep mode
- Fault diagnosis
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Parrot
User Manual
Scope of delivery
Package contents | Quantity |
---|---|
Luminaire | |
USB-C Charger | |
Smart Charge |
Guarantee
You have purchased a high-quality product that was produced and packaged with the utmost care. Should you nevertheless have grounds for complaint, please contact your retailer quoting the final inspection number as stated on the last page of this document. We will deal with your complaint as soon as possible. This product must be checked for visual defects, and/or scratches, before being used. Once the product has been put into operation, the right for a customer to make a complaint due to visual defects expires. To avoid damage during to transport, ensure that the luminaire is adequately protected when it is returned.
General information
Please read this manual carefully before assembly / mounting. This will help
avoid errors that could lead to a malfunction.
Keep this manual for future reference.
This luminaire has been developed for indoor use and is intended for the
lighting of rooms.
Differences in brightness and white tone of the LED’s are conditional of
manufacturing and are no reason for a complaint.
The LEDs can be replaced by the manufacturer only.
Safety instructions
The luminaire must not be opened.
Care instructions
Please clean this luminaire with a dry cloth. We recommend microfibre cloths
for sensitive surfaces. Only clean the luminaire after it has cooled down.
Surface protection: all polished, lacquered or galvanised surfaces must be
protected against all types of stresses – especially all copper parts, as they
are only provided with an invisible protection against tarnishing.
Technical data
| LED
Warm Dim
800 lm, 10 W, 2700 – 2200 K, CRI > 90
---|---
Li-ion
Battery| Input: 5V ⎓ 3A
Output: 11 – 16,8V / ⎓ 6700mAh / 96,4 Wh
Battery life: 8 – 100 hours
| This product contains a light source of energy efficiency class D. The LEDs
can be replaced by the producer only.
| Protection class 3
| Touch Dim
| 3 kg
| This luminaire has been developed for indoor use.
| This product must be disposed of properly at the end of its service life; it
must not be disposed of with normal household waste.
| CE-conformity mark
Dimensions
Charging of the luminaire
Due to technical reasons, the battery is charged to 20% at the delivery of the luminaire. Before first use, we recommend fully charging the luminaire using the supplied charger.
Battery capacity
The control LED lights up after the Touch surface area is touched.
3 LEDs > 40 %
2 LEDs 20 – 40 %
1 LED 5 – 20 %
1 LED blinking < 5 %
Operating time extension
With a remaining battery life of 10%, the luminaire will automatically slowly
dim down to extend the battery life. To switch off this function, the
luminaire must be one time dimmed upwards.
Agility
The aluminum frame is height-adjustable by 42 cm, with a 30° tilt and 310° rotation to the lamp head.
Height adjustment
To adjust the height of the luminaire, turn the upper shaft counter-clockwise past a noticeable resistance point. Set the desired height, then turn the upper shaft clockwise to lock into position.
Functions of the luminaire
Start / Wake up
The luminaire is set to sleep mode for delivery. To exit sleep mode, press for
1 second the touch surface.
On / off – dim
Short touch: on / off
Longer touch: dim
Sleep mode
For delivery, transport or longer periods of storage, the luminaire must be
completely switched off so that it is not accidentally activated. To do this,
put the luminaire into sleep mode.
Activate
Press the Touch surface area for 10 seconds.
Deactivate
Press the Touch surface area for 1 second.
Fault diagnosis
Problem | Possible cause | Possible solution |
---|---|---|
The luminaire does not work. | The luminaire is in sleep mode. |
Battery is not charged.
Battery is defective.| Deactivate the sleep mode. (p. 22)
Charge the battery with the provided charger.
Luminaire must be returned to manufacturer.
Touch control does not work.| | Luminaire must be returned to manufacturer.
The luminaire can no longer be fixed in hight.| The hight adjustment is
defective.| Luminaire must be returned to manufacturer.
Final inspection number
2 year guarantee
5 year guarantee of LED
TOBIAS GRAU GmbH
Siemensstrasse 35b
25462 Rellingen
tobiasgrau.com
info@tobiasgrau.com
BR 16 1666 C / Stand 10/22