GRAU B0CNZTBCV3 IWIEIF Reading Bedside Bedroom Table Lamp Instruction Manual

GRAU B0CNZTBCV3 IWIEIF Reading Bedside Bedroom Table Lamp

Technical specifications

• PRI 120 – 240 V / Sec: USB-C 12 V 1 A / Task Light: 1000 Im, 3500 K, CRI 94+, 11 W / Golden Light: 600 Im, 2300 K, CRI 87+, 11 W
• Protection class II
• This product contains a light source of energy efficiency class E. The LEDs can be replaced by the producer only.
• 6 kg
• Suitable for use in dry indoor areas
• Proper disposal required after use; do not dispose of in household waste.
• CE conformity mark

General information

• Please read this manual carefully before assembly and mounting. This will help avoid errors that could lead to a malfunction.
• Keep this manual for future reference. This luminaire has been developed for indoor use and is intended for the lighting of rooms.
• Differences in LED brightness and white tone are a normal occurrence in manufacture and do not constitute reason for complaint.
• The LEDs can be replaced by the manufacturer only.

Care instructions

Please clean this product with a dry cloth, prefera-bly a microfiber cloth for sensitive surfaces. Clean the fixture only after it has cooled off.

Safety instructions

• Do not open the luminaire.
• This luminaire is to be disposed properly according to EU regulation.

Warranty

You have purchased a high quality product that has been manufactured and packaged with the utmost care. However, if you have any reason to complain, please contact your dealer. We will process your claim as soon as possible. In the event of a return, please ensure that the luminaire is packed in protective packaging to prevent damage in transit.

Scope of delivery

• Luminaire body 1
• Wallcover 1
• Wall fixture 1
• Screws 2
• Allen keys 3
• USB-C charger 1
• Screws + Dowels 2
• Cover cap (reserve) 3

Dimensions

Complaint notice

Please check the luminaire for optical flaws or scratches before use. Once the product has been put into operation, the right to claim for aesthetic defects expires.

Installation

Install the wall fixing (the choice of suitable fasteners is the responsibility of the installer)

Fit the wall panel to the wall fixing and secure it with the screw shown.

Insert the luminaire body into the luminaire holder on the bracket of the wall panel and guide the cable end down through the slotted hole.

Secure the luminaire body in the luminaire holder with the screw shown. Do not tighten the screw too tightly so that the luminaire body can be turned easily.

Readjustment

The force of adjustment of the luminaire body can be altered at a later stage. To allow for less mobility, tighten the screws at the marked points. To allow for more mobility, loosen the screws a little.

The lamp head joint can be readjusted using a small screw. To do this, carefully remove the cover cap over the joint and slightly tighten the screw with the fallen key provided. Then replace the cover cap over the joint.

Features

• Color Tune
• Optical lense
• Rotatable head
• Assembled in Germany

Grau GmbH • www.grau.art Status 07 / 2024 • BR 16 1641 A

Scan for more information

Documents / Resources

| GRAU B0CNZTBCV3 IWIEIF Reading Bedside Bedroom Table Lamp [pdf] Instruction Manual
B0CNZTBCV3 IWIEIF Reading Bedside Bedroom Table Lamp, B0CNZTBCV3, IWIEIF Reading Bedside Bedroom Table Lamp, Reading Bedside Bedroom Table Lamp, Bedside Bedroom Table Lamp, Bedroom Table Lamp, Table Lamp
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>