StarTech com 2469 Anti Blue Light Filter Instruction Manual
- July 9, 2024
- StarTech com
Table of Contents
StarTech com 2469 Anti Blue Light Filter
Specifications
- Product: StarTech.com Screen Filters
- Warranty: 2 years
- Manufacturer: StarTech.com Ltd.
- Locations: London, Ontario, Canada / Groveport, Ohio, U.S.A. / Northampton, U.K. / Hoofddorp, The Netherlands
Installation Instructions for StarTech.com Screen Filters
Product Usage Instructions
Requirements
For the latest manuals, product information, technical specifications, and
declarations of conformance, please visit:
www.startech.com/support
Install the Screen Filter
Notes: Not all installation methods are available for all Screen Filters.
For installations where less frequent removal is desired or if the display is
bezel-less, it is recommended to use the Adhesive Strips. For installations
that require frequent removal of the Screen Filter or if the display features
raised bezels, it is recommended to use the Mounting Tabs. Remove all
Protective Films from the Screen Filter prior to installation. If the Screen
Filter is reversible, choose the side that best fits the application.
Installation Methods:
- Method 1: Adhesive Strips
- Clean the Screen using the Wiping Cloth.
- Select the side of the Screen Filter intended to Face Outward. Place the Screen Filter on a clean and flat surface with the selected side Facing Down.
- Remove all Adhesive Strips from the Transparent Lining. (Figure 1)
- Carefully align the Adhesive Strips along the Top, Bottom, Left, and Right edges of the Screen Filter. Apply Firm Pressure to affix them to the Screen Filter. (Figure 2).
- Carefully remove the Protective Backing from the Adhesive Strips. (Figure 3)
- Attach the Screen Filter to the Screen, starting from the Bottom and working towards the Top. The Adhesive Side should face toward the Screen. (Figure 4)
- Apply Gentle Pressure on the Locations where the Adhesive Strips were installed.
- Clean any fingerprints on the Screen Filter using the Wiping Cloth.
- Method 2: Mounting Tabs
- Clean the Screen and Bezels using the Wiping Cloth.
- Separate the Mounting Tabs. (Figure 5)
- Remove the Protective Backing from the Mounting Tabs. (Figure 6)
- Install One Short and One Long Mounting Tab on the Left Bezel.
- Repeat Step 4 for the Right Bezel.
- Install One Short Mounting Tab on the Bottom Bezel. (Figure 7)
- Slide the Screen Filter between the Mounting Tabs and the Screen. (Figure 8)
Note: Depending on the display size, additional Mounting Tabs may need to be installed on the side or bottom bezels. - Clean any fingerprints on the Screen Filter using the Wiping Cloth.
Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and
Symbols This manual may make reference to trademarks, registered trademarks,
and other protected names and/or symbols of third-party companies not related
in any way to StarTech.com. Where they occur these
references are for illustrative purposes only and do not represent an
endorsement of a product or service by StarTech.com, or
an endorsement of the product(s) to which this manual applies by the third-
party company in question. StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and
other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.
Warranty Information
This product is backed by a two-year warranty. For further information on
product warranty terms and conditions, please refer to
www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd.
and StarTech.com USA LLP (or their officers, directors,
employees or agents) for any damages (whether direct or indirect, special,
punitive, incidental, consequential, or otherwise), loss of profits, loss of
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road Brackmills,
Northampton
NN4 7BW
United Kingdom
For additional self-service support options and community forums, please visit: www.StarTech.com/support
FAQ
Q: What should I do if my display size requires additional Mounting Tabs?
A: Depending on your display size, additional Mounting Tabs may need to be
installed on the side or bottom bezels. Follow the installation instructions
carefully to ensure secure attachment.
Q: How do I claim warranty for myStarTech.com Screen
Filter?
A: For warranty claims and information regarding product warranty terms and
conditions, please refer to
www.startech.com/warranty or contact
StarTech.com support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>