AVIANCE lighting HD65536 19 Inch 2 Light Antique Brass Hardwired Outdoor Hardwired Wall Lantern Instruction Manual
- July 9, 2024
- AViANCE lighting
Table of Contents
AVIANCE lighting HD65536 19 Inch 2 Light Antique Brass Hardwired Outdoor
Hardwired Wall Lantern
Product Specifications:
- Model: HD65550
- Power Source: Electric
- Material: Not specified
- Maximum Wattage: Not specified
Product Usage Instructions
Assembling the Fixture:
- Shut off the power at the circuit breaker and remove the old fixture.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Ensure not to lose any small parts needed for installation.
- Take apart the column nut(E), small cover(A), and cover(B). Install the light bulbs (not included) according to the fixture’s specifications. Do not exceed the maximum wattage rating.
- Attach the cover(B) and small cover(A) onto the lamp body(C), then securely lock it with the column nut(E).
- Attach the assembled lamp body onto the post (G, not included) and securely lock it with screws (D).
Connecting the Wires:
- Connect the electrical wires as follows:
- Black wire from the fixture to the black house (hot) wire.
- White wire from the fixture to the white (neutral) house wire. Ensure all wire nuts are secured. You may wrap the connections with electrical tape.
- If your outlet box has ground wires (green or bare copper), connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck the wire connections neatly into the post.
Your installation is now complete. Restore power to the junction box and test the fixture.
FAQ:
-
Q: What should I do if I exceed the maximum wattage rating?
A: Exceeding the maximum wattage rating can lead to overheating and potential hazards. It is crucial to adhere to the specified wattage limits to ensure safe operation of the fixture. -
Q: How do I contact customer service for assistance with parts or assembly?
A: For assistance with parts or assembly, please email customer service at info@aviancelighting.net
ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed. However, the
installation instructions do apply to this product.
HD65550
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ASSEMBLING THE FIXTURE
- Shut off the power at the circuit breaker and remove the old fixture.
- Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
- Tack apart the column nut(E), small cover(A), and cover(B). Install the light bulbs (not included) by the fixture’s specifications. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
- Attach the cover(B) and small cover(A) onto the lamp body(C), then lock it securely with the column nut(E). 5. Attach the assembly lamp body onto the post (G, no included) and lock it securely with the screws (D).
CONNECTING THE WIRES
- Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck the wire connections neatly into the post.
Your installation is now complete. Return power to the junction box and test
the fixture.
Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service at:
info@aviancelighting.net
©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC