INNOVV K3 Dual Channel Motorcyle Motocam Installation Guide
- June 13, 2024
- INNOVV
Table of Contents
INNOVV K3 Dash Cam
Intended For Powersports
(Motorcycles, ATVs, UTVs & Others)
INNOVV K3 Product Overview
- The INNOVV K3 dash cam features dual cameras to provide complete coverage around you, capturing footage in Full HD 1080P at 30 FPS.
- It is equipped with the Wi-Fi and GPS module, allowing you to access and share routes, tracks and waypoints via INNOVV App.
- Both of the DVR and cameras are certified with an IP67 rating.
- Both cameras are constructed of durable and lightweight aerospace aluminum alloys, enabling a better anti-electromagnetic interference capability.
- It adopts the intelligent DC converter for power supply to better protect the device from battery draining problem.
- It runs faster and has better performance with dual-core processors on the DVR.
- It is easy and flexible to install with its small size and smart design.
Brief Introduction
1. Function Button
2. Recording Indicator
3. GPS Indicator
4. Wi-Fi Indicator
5. Remote Control
6. Remote Control Cable (6-pin male)
7. Remote Control Cable Connected to DVR(6-pin female)
8. Front Camera
9. Rear Camera
10. Rear Camera Cable (6-pin female)
11. Front Camera Cable (6-pin female)
12. Rear Camera Cable Connected to DVR (6-pin male)
13. Front Camera Cable Connected to DVR (6-pin male)
14. Waterproof Silicone Plug
15. TF Card Port
16. USB Port| 17. DVR
18. GPS Cable Connected to DVR(3-pin female)
19. GPS Cable (3-pin male)
20. GPS Module
21. Fuse Holder
22. Positive Terminal of Power Supply
23. Negative Terminal of Power Supply
24. ACC Wire (Offers 12V switch power source after ignition)
25. Power Indicator (Blue light on means there is 5.3V voltage)
26. DC Converter
27. Microphone
28. Power Input Cable Connected to DVR(3-pin male)
29. Microphone Cable Connected to DVR (2-pin female)
30. Microphone Cable (2-pin male)
31. Power Output Cable (3-pin female)
---|---
Motorcycle Installation Demo
The Installation Guide
Converter Installation
- Red wire (connected to the positive of battery)
- Black wire (connected to the negative of battery)
- Yellow wire (connected to the 12V switched power source, like head light, tail light, horn and others which are associated to the ignition)
- Power output cable (connected to the DVR)
- Converter
Camera Installation
Installation Method-1 (Without L Bracket)
- Rubber mat
- Small block
- M625 mm screw 1 piece
- ‘5; M68 mm screw 2 pieces
- U bracket
- Camera
- 3M rubber cushion
Camera Installation
Installation Method-2 (With L Bracket)
1. M625 mm screw 1 piece
2. L bracket
3.6.7 M68 mm screw 3 pieces
4. Rubber mat
5. Small block
8. Camera
9. U bracket
10. 3M rubber cushion
Camera Installation
Installation Method-3 (With Deformable Metal Plate)
① Cable clip
② Camera
③ U bracket
④ M68mm screw 2 pieces
⑤ Small block
⑥ Deformable metal plate
⑦ 3M double-sided tape
⑧ M612mm screw 1 piece
Remote Control Instruction
LED Indicators
Status| Off| Solid On| Flash quickly (5 flashes
per second)| Flash slowly (1 flash per second)| Flash quickly for a long time
(2 flashes updated every second)| Flash quickly (only 1 flash)
| Not
working| | Recording No TF Card/ TF Card Error| Not recording| Accident
video, protected video or parking video
is recorded under specific conditions.| Successful photo taking by pressing
the button twice in a short time.
| Wi-Fi off| Connected| R camera unconnected
or disconnected| Connecting| /| /
| Gps off| Connected| I| Connecting| /| /
Firmware Updating| Three indicators flash simultaneously
Instruction of the function button on remote control
1.Saving current video by pressing the button for once.
2.Photo taking by pressing the button twice in a short time.
3.Factory reset by pressing the button for 10 seconds.
Remote Control Installation
① Remote control
② L bracket
③ M68 mm screw 1 piece
App Installation Guide
APP Download
Android User: Search INNOVV in Google Play Store, then download and install it
on your phone.
iPhone User: Search INNOVV in App Store, then download and install it on your
phone.
With the DVR working normally and the Wi-Fi indicator lights on, please kindly
turn on the Wi-Fi and then search the Wi-Fi network named INNOVV_K3_xxxx, and
you could easily join it with the default password 12345678.
Some Android users may get the error message that “This WLAN network has no
Internet access. Connect anyway?” Please kindly click the “Connect” button to
continue the network connection.
|
---|---
https://play.google.com/store/apps/details?id=cn.rxt.case.innovv|
https://apps.apple.com/cn/app/innovv/id1235353801
App Interface
TF Card Instruction
INNOVV K3 dash cam requires at least a U1 (UHS Speed Class 1), V10 (Video
Speed Class 10) rated or faster TF card to ensure better performance.
The INNOVV K3 could support up to 256GB TF card capacity to enable long recording times.
Microphone Instruction
An open foam cover around the microphone is used as the first line of defence
against wind noise. You are suggested to put the microphone against the
heading direction to further minimize the wind noise.
Parking Mode Instruction
If the Parking Mode has been enabled with INNOVV App on your phone, INNOVV K3
will provide around-the-clock protection when you are away and even the engine
is not running. The K3’s smart power supply module triggers parking mode
automatically, and the INNOVV K3 will wake up and start recording when an
impact or motion is detected by the built-in G-Sensor.
In order to make the Parking Mode function properly, please make sure that the
INNOVV K3 should always be connected to a power source. And the red wire and
the black wire of the converter shall be connected to the motorcycle battery’s
positive terminal and negative terminal separately. The yellow cable shall be
connected to the ACC wire. The output voltage of the battery shall be at least
12V.
G-Sensor Instruction
There are 5 grades for the G-sensor’s sensitivity and each grade has 2
options. Users could easily adjust that with INNOVV App according to different
road conditions. The smaller the number is, and the less sensitive the
G-sensor is.
Specification
| Model | K3 |
|---|---|
| Structure Parameters | Parameters of Lens |
| Installation | Quick assembly with 3M double side tape |
| Resolution | 108013.30FPS |
| Viewing Angle | 120′ |
| DVR Size | 80’5695 mm |
| Sbucture | 6G+IR |
| Lens Size | Dia 25’54 mm |
| Aperture | F0,2. |
| Weight | / |
| Color | Black |
| Viewing Angle | 120° |
| Waterproof Rating | IP67 |
Structure 6G+IR
Aperttre F1.8
Parameter of DVR| Parameter of Converter
Processor| Dual-core| Voltage Input| 9-18V
RAM| 4G| ACC Input| 9-18V
Sensor| G-Sensor| ACC Output| 5.0V ± 0.2V
Storage| TF card| Voltage Output| 5.3V± 0.2 V
W-Fi| 2.4 Ghz| Max Current| 2A
Data Interface| Micro USB| Worldng Temperature| -30°C-70t
Video Format| MP4 / TS| |
GPS| | |
Working Temperature| -30t-70rc| |
Voltage Input| 5.0V± 0.5V| |
Basic Troubleshooting Guidelines
| Number | Problems | Solutions |
|---|---|---|
| 1 | Recording Indicator flashes slowly and it is not working. | Please kindly |
check the TF card first or try to use another TF card.
2| The recording videos are blurry and the sharp details are lost.| Please
kindly clean the camera lens with a lens tissue or cleaning cloth.
3| The DVR is not working after motorcycle ignition.| Please kindly check the
yellow ACC wire and other cable connection first.
4| There is no videos by rear camera.| Please kindly check the rear camera
connector and related cables.
5| There are many videos recorded in normal mode are saved in file named
accident videos.| Please kindly decrease the sensitivity of the G-sensor in
settings with INNOVV App.
6| There is no sound in all videos.| Please kindly make sure you have turned
on the Microphone.
If that still fails, please kindly turn off the time-lapse video in
settings with INNOVV App. App.
Important Notice
Please make sure that the Microphone cable is not close to the GPS cable.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>