ACEZONE DW01B A-Spire Wireless Bluetooth Headphone User Guide

: July 8, 2024
: ACEZONE

Table of Contents

ACEZONE DW01B A-Spire Wireless Bluetooth Headphone
Product Information
Product Usage Instructions
FCC Statement
FAQ
Dongle pairing
FCC Statement
ISED Statement
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ACEZONE DW01B A-Spire Wireless Bluetooth Headphone

Product Information

Specifications:

Color: Black
Compatibility: PC
Connection: Wireless
Range: Up to 10 meters

Product Usage Instructions

Dongle Pairing:

Clear pairing list on dongle:
Hold button until LED turns purple.
Clear pairing list on headset:
When headset is turned off, hold power button until ‘Pairing list cleared’ voice prompt.
Go to Pre-Pair tab.
Connect dongle and headset to the same PC.
Wait for ‘Green’ connection status.
Press ‘Pre-Pair Headset and Dongle’.
Wait for message ‘Remove USB cable from headset’.
Remove USB cable from headset.
Wait for dongle light to turn blue.
When dongle LED is blue, press ‘Press when Dongle LED is blue’.
Play audio from the PC (From web player, music player or similar).
- Make sure the dongle is chosen as the sound device in Windows.
- Listen for audio.
If music is playing in the headset, press ‘Pairing complete’.

FCC Statement

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

ISED Statement:
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with a minimum distance of 0mm between the radiator and your body.

FAQ

How do I know if the pairing was successful?
When the dongle LED turns blue and you hear the ‘Pairing complete’ message, the pairing is successful.

Dongle pairing

Before starting, the pairing list shall be cleared in dongle and headset.
Clear dongle: Hold button until LED turns purple.
Clear headset: When headset is turned off, hold power button until ‘Pairing list cleared’ voice prompt.

Go to Pre-Pair tab
Connect dongle and headset to the same PC.
Wait for ‘Green’ connection status.
Press ‘Pre-Pair Headset and Dongle’
Wait for message ‘Remove USB cable from headset’.
Remove USB cable from headset.
Wait for dongle light to turn blue.

Troubleshooting: Dongle does not turn blue

  * Check if headset is turned on.
  * Remove dongle from PC and connect to PC again.

When dongle LED is blue press ‘Press when Dongle LED is blue’
Play audio from the PC (From web player, music player of similar…). Make sure the dongle is chosen as sound device in windows. Listen for audio.
If music is playing in the headset press:
Pairing complete

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
The device has been evaluated to meet general RF exposure requirement. This equipment should be installed and operated with minimum distance 0mm between the radiator & your body.