CombiSteel 7090 Series Cold Display Wesley User Manual
- July 9, 2024
- CombiSteel
Table of Contents
Cold Display Wesley
User Manual
Models:
7090.0085 - 7090.0090 - 7090.0095
For your convenience, please read this manual carefully and operate according to it.
1. PRODUCT INTRODUCTION
- These products are designed especially for convenience store, according to the most popular structure, with the high quality parts, elaborate, reliable, elegant and luxury appearance, with complete function. These showcases have compact structure, with sleek, luxury, European style appearance.
- Back flow refrigeration system to make sure the even temperature; Precise defrosting control system with reliable performance; Adopting natural air defrosting to reduce the power consumption.
- The length of horizontal showcase is : 1500mm/1875mm. The control temperature is from 0 to 4°C, they are suitable for showing milk ,soft drink , fresh meat and other cooked food, The inside material of the showcase is stainless steel, which is anti-corrosion , easy to clean, simple operation and no pollution to the food. The cooked food showcase appearance looks luxury and European style, the hyperboloid toughened glass is solid and reliable with the best showing effect, the appearance is simple but elegant, The arc glass window is easy to open to take out the food, another option is that there is one type of arc glass window is fully sealed, very safe and clean, no pollution, with diverse dimension for your choice; Cold showcase has the advantage of fashion ,simplicity, convenience, it can combine fresh with showing function to control the temperature from -2 to 2°C suitable for cold fresh meat, fish, other seafood, refined processed food and also suitable for reserving drinks, tea, vacuum food, vegetable, sushi. It is the best choice for super market, hotel, shopping mall.
- Product features:
- High quality unit, it is low noise, high efficiency and environment friendly and save energy.
- Computerized fully automatic temperature control system, easy to operate and precise to control
- With overall foam technology and environment friendly foam material to realize better power saving and healthier.
- The cold air evenly spread, stable temperature inside, the food is not easy to air drying
- Pure copper pipe with aluminum evaporator to get more even refrigeration in shorter time
- The front open type of arc reinforced glass gives nice showing effect and saves energy
- PU overall foam with fully sealed design, is safe and saving power, good appearance
- It is suitable for wide climatic zone, diverse voltage, wide application, more stable
- Refrigeration system adopts famous brand compressor, electronic temperature control is very precise and high efficient.
- It adopts the drainage and pressure from evaporation system to easily deal with condensed water.
2. SAFETY SIGN AND NOTICE
Safety: Horizontal showcase should be installed on the suitable place
according to the requirement in the manual. Authorization: All the jobs
relative to showing case and refrigeration system should be done by qualified
and authorized professional workers.
Safe operation: In order to avoid possible danger, before operation, all the
workers should study manual carefully.
Safety notice: These safety notices are marked specially, in order to avoid
danger, they must be abided by.
Notice! To prevent possible small danger on equipment
Be careful! To prevent possible small danger on workers
Caution! To prevent possible serious danger on workers
Danger! To prevent serious accident on workers
3. TRANSPORTATION AND UNPACKING NOTICE
There are fragile glass inside the equipment and the package, please handle
with care, when you transport and carry on and move the equipment.
When you unload the equipment from the truck , please use the double fork lift
paying full attention , if you use the crane ,please fix the specified
position with steel rope or cable with diameter above 10mm to move down it
safely.
When you move the equipment, please don’t move the wood tray under the
equipment, don’t move inside the equipment to avoid damaging; meantime please
move equipment stably to avoid any inclining, lying on or reversing.
Horizontal case, unit and spare parts installation will be done by authorized
workers from our company, please don’t open the package by yourself to avoid
any damage of the case and parts.
You need to open the package carefully to avoid any damage on the case and
parts; please don’t mix and lose any spare parts inside one package, you
should assembly directly on the set down location.
4. OPERATING NOTICE
4.1 POSITION
Horizontal showcase must be located inside the room, cannot be used outdoor, it must be located in the stores, super market, hotel with good air condition to make sure the temperature keep on or below 25, humidity 60%, the wind speed less than 0.2m/S and there is no other thermal resources around. When the temperature, humidity and wind speed around is above this situation, the horizontal showcase refrigeration effect cannot reach to the requirement, if the humidity is above 60%, there will be condensation on the glass, it is normal situation and will disappear when the humidity going down.
Detailed operating requirement:
During the operation, the voltage should be kept stable within ±10% of stated
power, if the voltage is not stable, please use the safe and reliable adaptor
.
The environment temperature of condensing unit should be below than 40,The
environment should be clean without sundries and well ventilation; if
condensing unit are located outdoor , you should put rain-proofing, sun-
proofing and metallic wire protection device.
Horizontal showcase should be installed on the smooth and even ground, keep
it horizontal and make sure well water drainage.
To avoid putting showcase under the sunshine, light or any other thermal
source area.
To avoid putting the showcase near air inlet and outlet, fan or other door
and window which need often open, not to have influence on the air curtain.
4.2 INSTALLATION
To take out the spare parts inside the showcase and check them according to
the parts list. To connect the showcase( if you choose the all in one machine,
this section is not included)
To move on these two case unit closely and adjust the bolt and case to make
sure the showcase aligning from high and low, front and back.
Fasten the bolt and nut on the showcase.
To install the spare parts on the showcase, to make sure all the parts like
shelf, supporting arm, label should be put on the same position with same
angle.
To install the drainage elbow-junction according to the reserved drainage
channel position, make sure that there is proper sealant on the joints to
avoid any leakage.
To arrange , install and connect the refrigeration pipe and electric circuit
according to the layout.
After the correct pressure test, please evacuate and add into fluorine and
check if there is any error on the electronics.
To install the plaque including bottom, side, top plaque and joint plaque.
To check the spare parts and adjust to the right position.
To check all the electronics, refrigeration unit if there is any losing or
error on them after installation.
To clean the showcase outside and inside with alcohol or cleanser.
To transfer the manual, spare parts to customers and explain the operating
notice to customers and make sure customer sign on the project transfer
confirmation list to complete the installation.
Operation
Please keep some space during putting food into the showcase to give better
air recycle and food storage.
Don’t put food beyond or block the fan inlet to prevent the cold air
recycle.
Don’t put food near air returning outlet, otherwise it will cause the
incorrect temperature inside the showcase.
Notice: Don’t put wrongly the frozen and chilled food in the wrong showcase.
In order to avoid unnecessary food waste and power waste, the food inside
showcase should be with proper package and make sure to reduce the open and
close times of the showcase.
Safety Notices:
After powering on, please make sure the temperature inside the showcase
going down to the required range, then putting the goods inside.
There should be individual plug in, reliable earth wire and suitable air
switch with leakage protection function on the horizontal showcase, the earth
wire cannot be connected to null line, water pipe or heating pipe.
Don’t store any inflammable, explosive, volatile gas or liquid inside the
showcase.
Before cleaning the showcase, please cut off the main power and make sure
there is no power and then start the clean job.
To clean the showcase outside and inside with the soft fabric which is
dipped into neutral non-corrosive detergent, after that to wipe them dry,
please don’t use the acidity, alkaline, and any other corrosive , poisonous
liquid to clean the showcase.
When you take out or put in the food into the showcase, please gently and
don’t throw into to avoid any damage.
Make sure to restart the power after 5 minutes from last power off, to avoid
damaging the electronic parts inside showcase.
To check the defrosting situation regularly inside showcase, if there is any
remaining, please contact the professional workers to resolve them.
Please assign the workers to check the showcase regularly , to check the
temperature changes inside and make records; if you find any abnormal please
contact with us or local service people to resolve any possible problem to
guarantee the normal usage and avoid any loss for you
During the usage, please don’t take out food with wet hands, or stand near to
the showcase to avoid frostbite.
5. MAINTENANCE
5.1 REFRIGERATION MAINTENANCE
Condenser maintenance: condenser is the main heat dissipation unit inside the refrigeration system of horizontal showcase, the dust easily stick on the aluminum heating sheet, if it is not serious, it will have influence on the compressor refrigerating function, if it is serious, it will lead to the compressor burnt up.
Please make sure power off before you start cleaning and there is no power on
the refrigeration system.
When you clean the condenser with water , please clean from up to down and
make sure all the sheets on the condenser are cleaned evenly.
When there are serious oil or dust on them, please add neutral detergent
or special detergent on aluminum to clean them.
Notice: To prevent water into fan or condenser.
After cleaning, please use high pressure nitrogen or compressed air to blow
on condenser to move out the water and dust on the sheets.
Notice: don’t wash and blow towards the fan and condenser.
To check the fan of the condenser and compressor, make sure there is no
error on all the electronic parts before powering one.
5.2 COMPRESSOR MAINTENANCE
To check if the foundation of compressor is fasten , or any loose or
displacement.
To check the oil lens on the compressor, the oil level should reach from the
half to one third of the oil lens( when still situation) , should reach from
one fourth to two third( when running situation)
To check the pressure control, temperature control, defrosting time control,
oil pressure control device, cooling spray system, T-joint, stop valve in the
system.
To check the light, temperature display, electronic valve, electronic
heating system.
To check the wire connection, if they are fasten and isolated sealed on the
joints.
To check the voltage, phase sequence, make sure the tolerance between
different phase voltage is equal or less than 3% ,compressor or condenser
voltage and phase sequence are correct.
To observe if there is any abnormal noise or situation in the running
system.
Notice: Must cut off the power when checking the electronics, only be done by
the professional workers.
5.3 DRAINAGE MAINTENANCE
To check the drainage situation inside and outside the showcase, to make
sure there is no dust block or ice block on the outlet.
To check the drainage pipe to make sure the pipe decline to the floor drain,
the declined degree is from 1/50 to 1/200
To check if there is any leakage or damage on the drainage pipe.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>