TRB160 Teltonika Networks Wiki Owner’s Manual

TRB160 Teltonika Networks Wiki

Specifications

• 1 x Ethernet port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards
• Supports auto MDI/MDIX crossover
• Mobile module with features such as SMS, USSD, Black/White list, multiple PDN, band management, APN Bridge Passthrough
• VPN support with OpenVPN and IPsec encryption methods
• Support for various network protocols, VoIP passthrough, connection monitoring, firewall settings, DHCP, QoS, DDNS, network backup, load balancing, and more

Product Usage Instructions

Hardware Overview

Front View:

• Power socket
• DATASHEET // TRB160
• Ethernet port LEDs
• Power LED
• USB Type-C port
• Ethernet port

Back View:

• Mobile network type LEDs
• Mobile signal strength indication LEDs
• POWER SOCKET PINOUT
• 3G 4G Reset button
• Mobile antenna connectors
• Power / Red wire Input / Green wire Ground / Black wire Output / White wire

Features and Functionality
The TRB160 offers a wide range of features including Mobile and Ethernet connectivity, network routing, security options like VPN support, and more.

VPN Configuration
The device supports OpenVPN with multiple encryption methods. Users can configure VPN settings to establish secure connections.

Network Management
Utilize the device’s capabilities for network management including routing, firewall settings, DHCP configuration, QoS setup, and more to optimize network performance.

FAQs (Frequently Asked Questions)

• How do I reset the device to factory settings?
  To reset the device to factory settings, locate the reset button on the back view of the device. Press and hold the reset button for X seconds until the device reboots.

• Can I connect multiple devices to the Ethernet port?
  Yes, the Ethernet port supports multiple devices through a switch or hub to expand your network connectivity.

HARDWARE

FRONT VIEW

BACK VIEW

POWER SOCKET PINOUT

FEATURES

• MOBILE

  • Mobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
  • Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
  • SMS   SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSD Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/White list Operator black/white list (by country or separate operators)
  • Multiple PDN Possibility to use different PDNs for multiple network access and services
  • Band management Band lock, Used band status display
  • APN Auto APN
  • Bridge Direct connection (bridge) between mobile ISP and device on LAN
  • Passthrough Router assigns its mobile WAN IP address to another device on LAN

• ETHERNET
  Ethernet 1 x ETH port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

• NETWORK

  • Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  • Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPOE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
  • VolP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VolP packets
  • Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall Port forward, traffic rules, custom rules
  • Firewall status page View all your Firewall statistics, rules, and rule counters
  • Ports management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
  • Network topology Visual representation of your network, showing which devices are connected to which other devices
  • DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
  • QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS Supported >25 service providers, others can be configured manually
  • Network backup Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load balancing Balance Internet traffic over multiple WAN connections
  • Hotspot Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user manage- ment, 9 default customisable themes and optionality to upload and download customised hotspot themes
  • SSHFS Possibility to mount remote file system via SSH protocol

• SECURITY

  • Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & login attempts block, time-based login blocking, built-in random password generator
  • Firewall Pre-configured firewall rules can be enabled via WebUl, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN Port and tag-based VLAN separation
  • Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number
  • WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access controll Flexible access control of TCP, UDP, ICMP packets, MAC address filter

• VPN

  • OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN Encryption DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsec IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GRE GRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN Method of building scalable IPsec VPNs
  • SSTP SSTP client instance support
  • ZeroTier ZeroTier VPN client support
  • WireGuard WireGuard VPN client and server support
  • Tinc Tinc offers encryption, authentication and compression in it’s tunnels. Client and server support

• OPC UA

  • Supported modes Client, Server (planned)
  • Supported connection types TCP

• MODBUS

  • Supported modes Server, Client
  • Supported connection types TCP
  • Custom registers MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
  • Supported data formats 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII

• DATA TO SERVER

  • Protocol HTTP(S), MQTT, Azure MQTT
  • Data to server Extract parameters from multiple sources and different protocols, and send them all to a single server

• MQTT GATEWAY
  Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker

• DNP3

  • Supported modes Station, Outstation
  • Supported connection types TCP

• DLMS

  • DLMS Support DLMS – standard protocol for utility meter data exchange
  • Supported modes Client
  • Supported connection types TCP

• API
  Teltonika Networks Web API (beta) support Expand your device’s possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com

• MONITORING & MANAGEMENT

  • WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
  • FOTA Firmware update from server, automatic notification
  • SSH SSH (v1, v2)
  • SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
  • TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTT MQTT Broker, MQTT publisher
  • SNMP SNMP (v1, v2, v3), SNMP Trap
  • JSON-RPC Management API over HTTP/HTTPS
  • RMS Teltonika Remote Management System (RMS)

• IOT PLATFORMS

  • Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
  • Azure IoT Hub Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

• SYSTEM CHARACTERISTICS

  • CPU Qualcomm, 1.2 Ghz, ARM Cortex-A7
  • RAM 128 MB
  • FLASH storage 256 MB

• FIRMWARE / CONFIGURATION

  • WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA Update FW
  • RMS Update FW/configuration for multiple devices at once
  • Keep settings Update FW without losing current configuration
  • Factory settings reset A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer’s configuration

• FIRMWARE CUSTOMISATION

  • Operating system RutOS (OpenWrt based Linux OS)
  • Supported languages Busybox shell, Lua, C, C++
  • Development tools SDK package with build environment provided
  • GPL customization You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs

• INPUT / OUTPUT

  • Input 1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
  • Output 1 x Digital Output, Open collector output, max output 30 V, 300 mA
  • Events Email, RMS, SMS
  • I/O juggler Allows to set certain I/O conditions to initiate event

• POWER

  • Connector
  • 1 x 4-pin industrial DC power socket
  • 1 x USB Type-C
  • Input voltage range 4-pin: 9 – 30 VDC, overvoltage protection, reverse polarity protection, surge protection >35 VDC 10us max USB Type-C: 5 VDC
  • PoE (passive) Possibility to power up through ETH port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 – 30 VDC
  • Power consumption Idle: < 0.25 W, Max: < 3.3 W

• PHYSICAL INTERFACES

  • Ethernet 1 x RJ45 port, 10/100/1000 Mbps
  • I/O’s 1 x Digital Input, 1 x Digital Output on 4-pin power connector
  • Status LEDs 2 x connection type status LEDs, 3 x connection strength LEDs, 2 x ETH status LEDs, 1 x Power LED
  • SIM 1 x Internal SIM slot (Mini SIM – 2FF), 1.8 V/3 V, eSIM (Optional)
  • Power
  • 1 x 4-pin power connector
  • USB Type-C
  • Antennas 2 x SMA for Mobile
  • Reset Reboot/User default reset/Factory reset button
  • Other 1 x Virtual network interface via USB Type-C (For power and network data)

• PHYSICAL SPECIFICATION

  • Casing material Anodized aluminum housing and panels
  • Dimensions (W x H x D) 83 × 25 × 74.2 mm
  • Weight 172 g
  • Mounting options DIN rail, wall mount, flat surface (all require additional kit)

• OPERATING ENVIRONMENT

  • Operating temperature -40 °C to 75 °C
  • Operating humidity 10% to 90% non-condensing
  • Ingress Protection Rating IP30

STANDARD PACKAGE

• TRB160
• 9 W PSU
• 2 x Mobile antenna (magnetic mount, SMA male, 3 m cable)
• USB Type-C cable (0.8 m)
• 1x hex key
• Ethernet cable
• QSG (Quick Start Guide)
• Packaging box

CLASSIFICATION CODES

• HS Code: 851762
• HTS: 8517.62.00
  For more information on all available packaging options – please contact us directly.

AVAILABLE VERSIONS

TRB160 SPATIAL MEASUREMENTS

MAIN MEASUREMENTS
W x H x D dimensions for TRB160:

• *Device housing:** 83 x 25 x 74.2 mm
• Box: 173 x 71 x 148 mm

TOP VIEW
The figure below depicts the measurements of TRB160 and its components as seen from the top:

RIGHT VIEW
The figure below depicts the measurements of TRB160 and its components as seen from the right side:

FRONT VIEW
The figure below depicts the measurements of TRB160 and its components as seen from the front panel side:

REAR VIEW
The figure below depicts the measurements of TRB160 and its components as seen from the back panel side:

MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when cables and antennas are attached:

DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:

References

• Getting Started | Teltonika Networks Web API

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>