Aerpro FP9660 Double DIN Facia Kit User Manual
- July 12, 2024
- Aerpro
Table of Contents
USER MANUAL
Model
FP9660
SZMK1
04-06-24
TO SUIT TERRITORY
Inclusions
1x Black (Satin) double DIN facia kit
1x Built-in HVAC & steering wheel control unit
1x Universal SWC patch lead
1x Antenna adapter
1x Chime retention kit
1x Mounting kit
Infodapter Controls
Button Functions
-
Temperature UP (Passenger side)
-
Interior light ON/OFF
-
Dynamic stability control ON/OFF
-
Door unlock
-
Hazard button
-
Door lock
-
Rear demister
(Push & hold for parking aid activation and deactivation) -
Front demister
-
Temperature UP (Drivers side)
-
Temperature DOWN (Passenger side)
-
Air circulation
-
Auto climate control
-
Fan speed
UP/ Menu Navigation -
System menu
-
Fan speed
DOWN / Menu Navigation -
Air conditioner
ON/OFF -
Mode
-
Temperature DOWN
(Drivers side) -
Temperature Sensor
-
Seek
-
Volume UP
-
Mode
-
Volume Down
-
Phone (No longer retained)
-
Voice Command button
-Short press to answer.
-Long press to hang up
NOTE: The voice command button has be re-assigned to answer and hang up calls
NOTE: The Infodapter video output is NTSC by default.
Interface Functions
Front Demister
Fresh air is blown through the heater core and then ducted to and distributed
over the interior surface of the vehicles windshield
Rear Demister
The demister clears condensation from the rear window
Air Circulation Mode
Changes between fresh air drawn in directly from the outside of the vehicle,
or recirculation where the air is drawn from inside the cabin
Mode
Changes the vent positions for heating and cooling
Heating & Cooling Temperature
To increase temperature press up, to decrease temperature press down. Left
hand side buttons adjust passenger side temperature settings. Right hand side
buttons adjust drivers side temperature settings. Push & hold the Auto button
to reset back to single zone. External temperature icon is in the top middle
Air conditioning On or Off
Press to turn the air conditioning On/Off or vice versa. This can be changed
and reversed in the setup menu. Note: Holding down the A/C button completely
turns the A/C heating and cooling system Off.
Fan Speed Adjustment
Pressing these will turn the fan speed up and down.
Note: Adjusting fan speed will also switch from auto to semi-auto climate
control.
Auto Function
Press to automatically set the climate control to maintain a specified
temperature.
Auto Function (Semi Auto)
Adjusting the fan speed will also switch from auto to semi-auto climate
control.
Door Unlock/Lock
Press to lock and unlock all doors in the vehicle
Dynamic Stability Control
Press to turn Dynamic Stability Control (vehicles traction control) on or off.
Interior Light
Press to turn the vehicles factory interior light on or off
Hazard Flasher Warning Light
Press to turn the vehicles hazard emergency light on or off
Menu Functions
Configuration Menu
Press and hold the menu button for a few seconds to display the Configuration
Menu. Press the Fan UP/DOWN buttons to navigate up and down between sub menus.
Press menu button to enter into sub menus and again to change settings.
Menu Functions (Infodapter Settings)
Select Infodapter Settings/Preferences to access sub menus.
Climate Screen Timeout
Adjusts the time it takes the Infodapter screen to return to the Headunit
Screen, by pressing the fan Up & Down buttons, select between 3 – 30 seconds
A/C Panel Brightness (Day mode)
Adjusts the brightness of the LED’s on the Infodapter, by pressing the fan Up
& Down buttons, select between 5% – 100%
A/C Panel Brightness (Night mode)
Adjust the brightness of the LED’s on the Infodapter, by pressing the fan Up &
Down buttons, select between 5% – 100%
Reverse Priority
Allows the selection of either the camera video feed or the park assist image
when the vehicle is in reverse. Switchable via steering wheels MODE button.
(Only appears in the menu if the camera connection setting is turned ON)
Rear Camera Delay
The camera image is displayed upon shifting out of Reverse (R) until the
vehicle speed reaches 8 km/h. This occurs when the rear camera delay feature
is on.
Restore Factory Settings
Restore all infodapter settings to default
Menu Functions (Infodapter Settings)
Installer Menu
When in the Configuration menu, press and hold the fan UP & DOWN buttons at
the same time to access the installer menu
Air Conditioner Type
Choose between a single or dual climate system.
Note: Dual climate systems can run as a single zone system
Screen Size/ Position
Allows the user to change the Infodapter screen to fit to your headunits
display
Camera Connected
Turns the reverse camera function On or Off. Note: must be set to “Yes”
Diagnostics
Information on the system to check the vehicle is communicating with the
Infodapter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>