AVIANCE lighting HD68544 24 Inch 3 Light Black Cast Brass Hardwired Outdoor Instruction Manual
- July 3, 2024
- AViANCE lighting
Table of Contents
AVIANCE lighting HD68544 24 Inch 3 Light Black Cast Brass Hardwired
Outdoor
Product Specifications
- Model Number: HD68544
- Power Requirement: Standard electrical outlet
- Bulb Type: Not Included
- Maximum Wattage: Refer to fixture specifications
- Color: Varies based on product
- Material: Metal and Glass
Assembly and Installation Instructions
Assembling the Fixture
- Shut off the power at the circuit breaker and remove the old fixture, including the single bar.
- Unpack the new fixture and lay out all parts carefully in a clear area, ensuring no small parts are lost.
- Discharge the finial (A) and cover (B) from the lamp body (C).
- Attach the candle sleeve (D) over the lamp holder.
- Install light bulbs (not included) following the fixture’s specifications. Do not exceed the maximum wattage rating.
- Raise the cover (B) to the top pipe thread of the lamp body (C), aligning the top center hole with the pipe thread, then lock it securely with the finial (A).
- Attach the assembled lamp body onto the post (not included) and secure it with the screw (E).
Connecting the Wires
- Connect the Black wire from the fixture to the black house (hot) wire. Connect the white wire from the fixture to the white (neutral) house wire. Ensure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has ground wires (green or bare copper), connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck the wire connections neatly into the post.
Your installation is now complete. Return power to the junction box and test the fixture.
Thank you for purchasing an AVIANCE product.
For assistance with parts or assembly, please email customer service at: info@aviancelighting.net
Frequently Asked Questions
Q: What should I do if I exceed the maximum wattage rating for the light bulbs?
A: It is important not to exceed the maximum wattage rating specified for your fixture as it can lead to overheating and potential hazards. Please use bulbs within the recommended wattage range.
Q: Can I use LED bulbs with this fixture?
A: Yes, you can use LED bulbs that are compatible with your fixture’s specifications. Make sure to follow the guidelines provided by both the LED bulb manufacturer and your fixture’s instructions.