AVIANCE HD52154 3 Light Brushed Nickel Dimmble Outdoor Instruction Manual

: July 4, 2024
: AVIANCE

Table of Contents

AVIANCE HD52154 3 Light Brushed Nickel Dimmble Outdoor
Product Specifications:
Product Usage Instructions
ASSEMBLING & INSTALLATION INSTRUCTIONS
ASSEMBLING THE FIXTURE
CONNECTING THE WIRES
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AVIANCE HD52154 3 Light Brushed Nickel Dimmble Outdoor

Product Specifications:

Model: HD52154
Fixture Type: Ceiling Light Fixture
Power Source: Electric
Material: Metal
Color: Silver
Wattage Limit: Refer to fixture specifications

Product Usage Instructions

Assembling the Fixture

Place the candle sleeve over the lamp holder.
Install light bulbs (not included) according to the fixture specifications. Do not exceed the specified wattage!

Hanging the Fixture

Turn off the power at the circuit breaker and remove the old fixture from the ceiling.

Connecting the Wires

Connect the black wire from the ceiling junction box to the smooth wire leg from the fixture.

FAQ (Frequently Asked Questions)

Q: How do I determine the correct wattage for the light bulbs?
A: Refer to the fixture specifications provided. Do not exceed the specified wattage to avoid damage.
Q: What should I do if I encounter issues during installation?
A: For assistance with parts or assembly, please contact customer service at info@aviancelighting.net

ASSEMBLING & INSTALLATION INSTRUCTIONS

The drawing shown may not exactly match the product enclosed. However, the installation instructions do apply to this product.

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.

ASSEMBLING THE FIXTURE

Shut off the power at the circuit breaker and remove old fixture, including the single bar.
Carefully unpack your new fixture and lay out all the parts on a clear area. Take care not to lose any small parts necessary for installation.
NOTE: Discharge of the finial(A), remove the plastic shim(B) and cover(C).
Put the candle sleeve(E) over the lamp holder.
Install the light bulbs(No Included) in accordance with the fixture’s specifications. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING!
Attach the cover(C) and plastic shim(B) to the top pipe thread of lamp body(D), then lock it securely with the finial(A).
Attach the assembly lamp body onto the post (No included) and lock it securely with the screws(F).

CONNECTING THE WIRES

Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured. You may wrap the connections with electrical tape. If your outlet box has a ground wires (green or bare copper) connect fixture’s ground wire to it. Otherwise attach the bare copper fixture wire to the green ground screw on the mounting plate.
Tuck the wire connections neatly into the post.

Your installation is now complete. Return power to the junction box and test the fixture. Thank you for purchasing an AVIANCE product.
Need assistance with parts or assembly? Please email customer service at:info@aviancelighting.net ©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING,INC.