Intenso F10000 Power Bank User Manual
- June 1, 2024
- Intenso
Table of Contents
Intenso F10000 Power Bank
Product Description
Please read this manual carefully and observe
and follow all the instructions mentioned in it to ensure a long service life
and reliable use of the device. Keep this manual handy and pass it on to other
users of the device.
Qualcomm Quick Charge is a product from Qualcomm Technologies, Inc. Qualcomm is a trademark of Qualcomm Incorporated registered in the United States and other countries. Quick Charge is a trademark of Qualcomm Incorporated. All Qualcomm Incorporated brands are used with permission.
SAFETY
Intended use
This power bank is intended exclusively for the power supply of devices with
an operating voltage of 5,0 V direct current (mobile phones, MP3-Player,
etc.), as well as devices which support the Power Delivery (PD) Standard or
the Qualcomm® Quick Charge™ Technology Standard. This product is not intended
for commercial use or for medical and special applications, where the failure
of the product can cause injuries, mortalities or considerable material
damages. In the case of use which does not correspond to the intended use, the
liability expires. The opening as well as conversion of the device and the use
of additional devices and accessories, which are not approved by us, must be
refrained from. Do not use the device under extreme environmental conditions
and observe the safety instructions. Non-observance of the information and
safety instructions in these Instructions is deemed as non-observance of the
intended use and leads to expiry of the liability and can lead to personal or
material damages.
The firmware and/or hardware may be changed at any time without prior notice.
For this reason it is possible that parts of these instructions, technical
data and images in this documentation differ slightly from the product in your
possession. All points described in these instructions only serve the purpose
of clarification and must not inevitably correspond to a certain situation.
Legal claims cannot be made on the basis of these instructions.
Safety instructions
Dangers for children and persons with restricted physical, sensory or
mental abilities:
Children often underestimate dangers or do not recognize them at all. This
device is not intended to be used by persons (including children) with
restricted sensory, physical or mental abilities or lack of experience and/or
knowledge, unless they are supervised by a person responsible for their safety
or received instructions from the person on how to use the device and they
have understood the resultant dangers. Unsupervised children should not have
access to the device. Make sure that children do not play with the device.
Danger of asphyxiation!
Children can put the packaging film or small parts in their mouths and choke on them.
Risk of short circuit!
To avoid injury, do not operate this appliance with wet hands.
Do not insert any items, which are not intended for its use, into the openings
of the device. This could lead to an electrical short-circuit and a resultant
fire.
Do not use the device if there is visible damage to the device itself or to
the USB cable, as this may result in injury or damage.
The device may not be exposed to spray or dripping water.
Do not place containers filled with liquids (vases, glasses, etc.) on the
device or in its immediate vicinity.
There is a risk that the container will tip over and the liquid will affect
the electrical safety.
Tripping hazard!
When positioning the device, pay attention that no one can tread on the cable or trip over it. Do not place any objects onto the cable.
Damage!
Do not use the device in extremely cold, hot, humid or dusty areas. Do not
subject it to direct sunlight.
Protect the product from open fire. There is danger of explosion!
Protect the device in every operating state against impact and falling.
This device is sensitive to electrostatic discharge. Therefore protect the
device against every possible electrostatic discharge.
To avoid malfunctions, do not connect the USB output ports of the device with
USB ports of computers or other devices. They are only intended for charging
devices.
To avoid overheating, do not block or cover the openings of the product.
Do not cover the product completely during operation to ensure heat
dissipation.
Do not open the housing of the device and do not disassemble it into its
component parts. Do not try to repair it yourself. The guarantee expires in
this case.
WARNING! Hot surface!
Holding the device for longer periods when in use can result in the surface becoming hot, causing skin injuries. When using the device, avoid holding it for too long, especially in areas which become very hot. Do not carry the device directly on your body. The device can be touched for longer periods after it has cooled down.
Declaration of conformity
The CE marking says that this product meets the requirements of all EU Directives applicable for this product.
The UKCA marking says, that this product meets the requirements of all UK Directives applicable for this product.
SCOPE OF DELIVERY
- Intenso Power bank F10000
- USB-C to USB-C charging cable (supports PD)
- Operating instruction
Please check whether the contents of the packaging (see also graphic at the beginning of the manual on page 2) are complete and undamaged. If this is not the case, please contact the seller or our service department:
USE
Device overview
- Status LCD
- Function key (ON/OFF)
- USB-C In/Out (PD)
- USB-A Out (QC)
Operation
Function key (On/Off)
If the charging process does not start automatically, you can start it
manually by briefly pressing the function key. You can stop the charging
process and deactivate the power bank by briefly pressing the key twice.
If no device is connected to the power bank, or if the connected device is
signalling to the power bank that it is fully charged, the power bank will
automatically switch to standby mode.
LCD Status display
The current charging status is displayed numerically on the LCD display during charging, resp. discharging the power bank as well as through brief pressing of the function key.
Commissioning / Charging the Power bank / Charging connected devices
a) Charging the Power bank
Please connect the supplied USB-C cable to the power bank’s USB-C port (USB-C
In/Out) and connect the other end of the USB-C cable to a USB-C power supply
or USB-C port on your computer.
The required charging time for the power bank depends on the selected charging
source and its output power.
Normal charging:
Use a standard USB power supply or USB port on a computer to charge the power bank via the USB-C In/Out port (max. 5.0 V/DC 3.0 A = max. 15.0 W).
Fast charging:
To fully charge the power bank (18.0 W), please use a power supply that supports the Power Delivery (PD) Standard. Fast charging is indicated by a green flash on the display. If this does not appear, your power supply or the cable used is not compatible with the standards and the power bank will charge normally.
b) Charging devices with the Power bank
This power bank has a USB-A port (USB-A Out QC) and a USB-C port (USB-C In/Out
PD), both of which can be used to charge devices.
The USB-A port supports the Qualcomm Quick Charge (QC) 3.0 Standard (Output
normal: 5.0 V/DC 3.0 A max.; Output QC: 5.0 V/DC 3.0 A, 9.0 V/DC 2.0 A, 12.0
V/DC 1.5 A max. = max. 18.0 W).
The USB-C port supports the Power Delivery (PD) Standard (Output normal: 5.0
V/DC 3.0 A max.; Output PD: 5.0 V/DC 3.0 A max.; Output PD: 5.0 V/DC 3.0 A,
9.0 V/DC 2.22 A, 12.0 V/DC 1.67 A max. = max. 20.0 W).
To charge your device with USB-C port, simply use the supplied USB-C to USB-C
cable. Of course you can also use your own USB charging cable to connect the
power bank with your device. Please note, however, that for the Quick Charge
Technology and the Power Delivery Standard cables are required, which support
this standard (if necessary ask the manufacturer of your USB cable).
To charge your device, simply connect the supplied cable with the USB-C port
(USB-C In/ Out PD) of the power bank and the other end with the USB-C port of
the device to be charged. Alternatively, connect your own cable – depending on
cable type- with the USB-A port (USB-A Out QC) or the USB-C port (USB-C In/
Out PD) of the power bank and the other end with the device to be charged. The
charging process starts automatically and the devices determine the suitable
charging current independently. If the Power Delivery Standard or the Quick
Charge Technology are used, this is shown on the display by a green flash
above the percent sign.
You can charge two devices simultaneously with the power bank. The Quick
Charge Technology and the Power Delivery Standard are, however, only supported
when just one device is charged. When charging 2 devices simultaneously, the
ports share the maximum output of 5.0 V/DC 3.0 A = 15.0 W.
If a device is charged with the power bank and the capacity of the power bank
is almost exhausted, this is signalled by blinking of the last number from 5 %
residual capacity. Please recharge the power bank soon.
Please note that while charging a device with a power bank, about 30 % of the
total capacity is used up just through the charging process. This is due, for
example, through the loss of power from circuit warmth and voltage conversion.
The power bank has to be used regularly for optimum performance. If this is
not the case, charge the power bank fully at least every three months. Make
sure that the warmth created through the charging process can be emitted from
the device (ideally place the power bank on a firm and heat-resistant base
while in use).
DISPOSAL
| Disposal of old batteries:
The devices marked with this symbol are subject to the European Directive
2006/66/EC All old batteries must be disposed of separate from the municipal
waste stream via desig- nated collection facilities appointed by the
government or the local authorities You avoid environmental damage with the
proper disposal.
---|---
| Disposal of old electronic equipment:
The devices marked with this symbol are subject to the European Directive
2012/19/ EC. All electrical appliances and old electrical appliances must be
disposed of separate from the municipal waste stream via designated collection
facilities appointed by the government or the local authorities. You avoid
environmental damage with the proper disposal of old electrical equipment.
| Packaging:
Packaging is raw material. The packaging material of this product is suitable
for recycling and can be re-used. Please pay attention to the local recycling
provisions when disposing of any materials.
OPERATING CONDITIONS
Operate the device at 0 to 40 degrees Celsius and a maximum humidity of 90 % (for a short time). If you do not use your device for a longer period, store it at between -10 and 45 degrees Celsius at max. 90 % relative humidity (for a short time) and charge this every three months to maintain full capacity.
TECHNICAL DATA
| Dimensions: | 131 x 67 x 15 mm |
|---|---|
| Power consumption (Input): | USB-C In: |
Normal: 5.0 V/DC 3.0 A
Power Delivery: 5.0 V/DC 3.0 A, 9.0 V/DC 2.0 A (max. 18.0 W)
Charging current delivery (Output):| USB-A Out:
Normal: 5.0 V/DC 3.0 A
Quick Charge: 5.0 V/DC 3.0 A, 9.0 V/DC 2.0 A, 12.0 V/DC 1.5 A (max. 18.0 W)
USB-C Out:
Normal: 5.0 V/DC 3.0 A
Power Delivery: 5.0 V/DC 3.0 A, 9.0 V/DC 2.22 A, 12.0 V/DC 1.67 A (PPS: 5.0 –
5.9 V/DC 3.0 A; 5.0 – 11.0 V/DC 2.0 A) (max. 20.0 W) USB-A + USB-C Out: 5.0
V/DC 3.0 A total
Internal battery:| 10000 mAh / 3.7 V lithium polymer battery
Status display:| Numerical LCD display
Integrated overcharge protection / discharge protec- tion / overvoltage
protection / short circuit fuse:| Yes
Standby time:| Up to 3 months
SERVICE / DISTRIBUTOR
INTENSO INTERNATIONAL GMBH I Kopernikusstraße 12-14 I D-49377 Vechta
Email (technical support) : support@intenso-
international.de
Email (RMA number): rma@intenso-international.de
Internet: www.intenso.eu
Telephone (technical support): +49 (0) 4441 – 999 111 (Mon. – Thur. 09:00
– 16:30; Fri. 09:00 – 14:00)
References
- international.de - This website is for sale! - Hotels Resources and Information.
- Intenso | for everyday life
- Intenso | for everyday life
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>