AVIANCE lighting HD52048 17.5 Inch 2 Light Antique Brass Instruction Manual
- July 3, 2024
- AViANCE lighting
Table of Contents
AVIANCE lighting HD52048 17.5 Inch 2 Light Antique Brass
Specifications
- Model: HD52048
- Power Source: Electric
- Fixture Type: Ceiling Light Fixture
- Maximum Wattage: Refer to the fixture’s specifications
- Grounding: Required
Product Usage Instructions
Assembling the Fixture
- Shut off the power at the circuit breaker and remove the old fixture, including the single bar.
- Unpack your new fixture carefully and lay out all parts in a clear area to avoid losing any small parts.
- Assemble the lamp body and candle sleeve according to the provided instructions.
- Install light bulbs (not included) based on the fixture’s specifications. Do not exceed the maximum wattage rating.
- Attach the assembled lamp body onto the post and secure it with the provided screw.
Connecting the Wires
- Connect the electrical wires following these steps:
- Black fixture wire to the black house (hot) wire.
- White fixture wire to the white house (neutral) wire.
- If available, connect the fixture’s ground wire to the ground wire in the outlet box. Otherwise, use the green ground screw on the mounting plate.
- Neatly tuck the wire connections into the post.
Your installation is now complete. Restore power to the junction box and test the fixture. Thank you for choosing AVIANCE!
FAQ
Q: What should I do if I exceed the maximum wattage rating?
A: Do not exceed the maximum wattage rating specified for the fixture as
it may lead to overheating or other safety hazards.
Ensure compliance with the recommended wattage for optimal performance and
safety.
Q: How do I contact customer service for assistance with parts or assembly?
A: For any assistance with parts or assembly, please email customer service at info@aviancelighting.net with your query or concern.
ASSEMBLING & INSTALLATION INSTRUCTIONS
- The drawing shown may not exactly match the product enclosed.
- However, the installation instructions do apply to this product.
- WARNING! SHUT THE POWER OFF AT THE FUSE OR CIRCUIT BREAKER.
ASSEMBLING THE FIXTURE (Fig.1)
- Shut off the power at the circuit breaker and remove the old fixture, including the single bar.
- Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to lose any small parts necessary for installation.
- Slip the threadlike bolt of the lamp body(A) into the side, and open the window. Put the candle sleeve(B) over the lamp holder (2163 not included candle sleeve).
- Install the light bulbs(not included) under the fixture’s specifications. NOTE: DO NOT EXCEED THE MAXIMUM WATTAGE RATING! Close the window.
- Attach the assembly lamp body(A) onto the post (not included) and lock it securely with the screw(C).
CONNECTING THE WIRES (Fig.2)
- Connect the electrical wires as follows. Connect the Black wire from the fixture to the black house (hot) Wire. Connect the white wire from the fixture to the white (neutral) house wire. Make sure all wire nuts are secured.
- You may wrap the connections with electrical tape. If your outlet box has ground wires (green or bare copper) connect the fixture’s ground wire to it. Otherwise, attach the bare copper fixture wire to the green ground screw on the mounting plate.
- Tuck the wire connections neatly into the post.
- Your installation is now complete. Return power to the junction box and test the fixture.
- Thank you for purchasing an AVIANCE product.
- Need assistance with parts or assembly? Please email customer service at: info@aviancelighting.net
- ©COPYRIGHT ALL RIGHTS RESERVED. AVIANCE LIGHTING, INC.
Documents / Resources
|
AVIANCE lighting HD52048 17.5 Inch 2 Light Antique
Brass
[pdf] Instruction Manual
HD52048, HD52031-2163, HD52031-2166, HD52031-2169, HD52031-2173,
HD52031-27216, HD52031-27219, HD52031-27223, HD52048 17.5 Inch 2 Light Antique
Brass, HD52048, 17.5 Inch 2 Light Antique Brass, 2 Light Antique Brass,
Antique Brass, Brass
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>